eurec used for sale

I SELL EUR LATHE MODEL 200 S EXCELLENT CONDITION

Eurolux Beer Tanks / Fermentation Tanks in AISI 304 test pressure: 1,5 bar, operating pressure: 0,99 bar with Cooling Jacket with Isolation - Capacity: 1000 Litres NEW Material: V2A (AISI 304) 1.4301 Upper bottom: with Manhole with 6 Screws incl. thread connection DN 50 according to DIN 11851 with over- and underpressure valve Tank Body: with Cooling Jacket 600 mm wide with inlet 1” external thread with Isolation Lower bottom: With Conical Bottom and rest outlet underneath with a forklift and pallet truck Measurements and weight: WxH: 1150 x 1950 mm Zyl. height: 850 mm weight: 170 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock Butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 Immersion socket for temperature control Temperatur ...

SEW Eurodrive electric motor Fully functional

ELF EUROPE oil and water-based duplex filling machine for the production of cooking oil, fibrous softdrink and syrups. Year of manufacture 2000. 20 filling heads, gravitational, computer controlled, time-controlled, continuous refill, buffer tank 300 l, Cip units motorized filling head height adjustment photocell bottle counting with bottle barrier design for gravity and pressure-assisted operation R1, SS/ teflon fitted, electropneumatikus valve actuators. two-row charging with filling heads mounted on a step beam feed tank with level control Capacity: 0.5 l to 6000 l / h, 2 l-2500 l / h. I have not used it since 2005, only stored in our warehouse. It needs some maintenance, SIEMES PLC COMPUTER battery must change.

Refrigerator Eurochiller, model GCA110/RB2T040KW, serial number 150208200800320033 Production - Italy. Issue 2008. Repair is needed, the device is in working condition, the heat exchanger was replaced from a plate to a shell-and-tube heat exchanger, a vibration damper was installed, but there is no 1-th three-way valve; Volt 400 HZ 50 Kw 50,5 A 86 Vaux 24 VI 500 IP 54 Gas R407c Air Condenser 25C Water Process 15C PS Alta/bassa, Hogh/Low Gas 27/22 bar TS Lato alta, High Side -10C/+95C TS lato Bassa, low Side -10C/+55C Cooling capacity 128 KW

Management of SEW Eurodrive. Serial No.: 0107200

SEW Eurodrive control system Serial No.: 0102819

Machine body is made of SUS304 sandblasted stainless steel. Theres PLC control panel, which sets dehydrating time and rotation speed, makes running smoothly. Dimension: 950x700x1230mm Basket Size：420x360x360mm Feeding per batch: about 15KG Motor Power: 1.5kw Frequency Converter Power: 1.5kw Voltage：380V, three phase

Approx. Onsite Dimension. (l x w x h): 800 x 1,600 x 2,000 mm, weight approx.: 300 kg

Approx. Onsite Dimension. (l x w x h): 800 x 1,600 x 2,000 mm, weight approx.: 250 kg

Approx. Onsite Dimension. (l x w x h): 800 x 1,600 x 2,000 mm, weight approx.: 300 kg

Used Eurostar Canning Line up to 3000 cph Technical Analysis The Used Eurostar Canning Line up to 3000 cph is an industrial grade bottling machinery that offers advanced performance and functionality for companies in the beverage industry Production Speed of the Used Eurostar canning line up to 3000 cph The Used Eurostar Canning Line is capable of operating at an impressive speed of 3000 bottles per hour BPH This high speed makes it ideal for large scale bottling operations Type of Containers Supported This machine is designed exclusively for can bottling making it highly specialized for this application Can Formats supported by the Used Eurostar canning line up to 3000 cph Versatility is a strong point of this bottling line as it can handle a wide range of can sizes including 0 20 L 0 25 L 0 33 L and 0 44 L cans plus 0 15 L slim sizes can also be added if necessary This flexibility allo ...

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

Cat.-Nr. 11-1050 new COMPLETE For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Juice from Fruits and Vegetables Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper For emptying fruits or vegetables from wood or PVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2339 – Eurolux Automatic Continuous Belt Press EL-1000 for producing fruit juice and fruit wine, cider from apples, pears Capacity: up to 3000 kg/fresh fruits Cat-Nr 06-1101 – Eurolux Floating Lid Tanks in AISI 304 4 x 1000 Litres,4 x 500 Litres, 4 x 300 Litres Cat-Nr 10-2351 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 1500 Litres Juice/h Cat-Nr 10-2344 – Eurolux Bag-in-Box Filler EL-1800 For filling liquids (frui ...

EUROMAC MTX INDEX 1250/30 punching machine was manufactured in Italy in 2008. The machine used for punching in various types of sheet metal, achieves the highest precision and accuracy in machining, thanks to its capacious turret head and high press force of 30 tonnes. The process is performed on a large brush table, which significantly reduces noise level and protects the workpiece surface from scratches and nicks. The EUROMAC 1250 hydraulic punching machine is controlled via a FabriWIN CNC 68 controller with many useful functions. For transport of the machine, tables 4,5,6 are removed and the holding bar is rotated by 90°. Technical specifications of EUROMAC MTX INDEX 1250/30 punching machine - press force: 30 t - feeds in X axis: 1250-2000 mm - feeds in Y axis: 1250 mm - automatic repositioning in the X axis: up to 10000 mm - working speed (cutting, stroke 20 mm): 780 1/min  ...

EUROMETAL FU-32B universal milling machine was built in 2008 in Poland. The process of precision machining of workpieces is performed on a large work table with a length of 1320 mm and a width of 315 mm using a highly efficient spindle rotating at a maximum speed of 1800 rpm. The total weight of the EUROMETAL FU 32B machine is 2100 kg. Technical data of EUROMETAL FU-32B milling machine - work table dimensions (L x W): 1320 x 315 mm - feed rate in the X/Y axis: 850/235 mm - spindle rotational speed: 1800 rpm - distance between spindle axis and table: 400 mm - spindle drive motor power: 5.5 kW - feed drive motor power: 1.5 kW - dimensions (L x W x H): 2000 x 1474 x 2080 mm - EUROMETAL FU32B machine weight: 2100 kg

Key data: 63 t

EUROMET Y41-63T hydraulic press manufactured in 2007 is designed for machining metal sheets, sections and profiles. EUROMET Y41 63T hydraulic press has a monolithic structure resistant to any deformations, which, combined with the 63-ton press force, allows to achieve excellent precision and quality of machining both in medium and large series production. Technical parameters of EUROMET Y41-63T hydraulic press - maximum press force: 63 t - work table dimensions (L x W): 580 x 560 mm - piston rod speed (pressure): 10 mm/s - piston rod speed (return): 95 mm/s - piston rod speed (no load): 38 mm/s - piston rod stroke: 500 mm - maximum piston rod feed: 800 mm - power: 7.5 kW

Baler Europress 610 V5, year of construction 2012 / 2017 refurbished by the manufacturer, very good condition, with chain belt conveyor belt Europress Technical Data Press Manufacturer: Europress Type 610 V5 Year of construction 2012 / 2017 refurbished by the manufacturer Drive power 2 x 30 kW Press force 90 t Insertion shaft 1,450 x 1,100 mm Bale dimensions 1,100 x 730 x 1200 mm, length is variable Bale weight 400-900 kg 5-fold vertical setting, fully automatic Filling volume hydraulic oil tank 2100 L Transport dimensions excl. Press 8,500 x 2,650 x 2,850 mm Transport weight press approx. 21 t Detailed information on general overhaul on request. Technical data on the conveyor belt will follow. Currently, the press is still in use.

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

Eurolux Beer Tank/ Storage Tank/ Pressure Tank 400 litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Eurolux Beer Tank/ Storage Tank/ Pressure Tank 400 litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW

Description Brand Eurfrigor Model Ice-bar ID TR904 Status Active Price 430 € + VAT Location Oradea (RO) Ice cube maker Eurfrigor Ice-bar, dimensions (L x W x H): 430 x 600 x 700 mm, electric input: 230 V / 50 Hz. Electrolux compressor model GP12TB, refrigerant: R134a. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Printing plates firing furnace Eurografica baby; good condition; cleaned and checked. suitable for 4 plates; Max. Plate width 75 cm; new hood shocks; Timer. Plate backing oven Eurografica baby; good condition; cleaned and checked; used for 4 plates, max.plate width 75cm; new lift; Timer.

Sheet thickness: 7,00 mm Bar diameter: 0 mm Punching size: 2000 mm (1) hydraulic / (2) mechanical: 1   MACH-id     5410 MAKE        EUROMAC Italia TYPE          ZX INDEX YOP           2007 SPECIFICATIONS Table load       80 Kg Working area X Axis       1250 mm Working area Y Axis        1000 mm Working area X Axis with override          2000 mm Punching force      30 T Maximum sheet thickness       7 mm Turret position    360 Gr index Auto indexing positions      1 Positioning speed X and Y Axis         10.000 mm/min. Control      EUROMAC TOPPUNCH DIMENSIONS Length      ...

Pressure: 30 t Sheet length: 1250 mm Sheet width: 750 mm Positions ATC: 0   CNC Brand: Euromac CNC Model: Europunch Make Euromac CX75 Type CX 750 x 30 CNC Year 1995 EUROPUNCH Pressure (metric ton)Force = 30 T Sheet length (mm)L = 1250 Sheet width (mm)W = 750 Pos ATC   Max 6 mm Large tool package 50xPos. accuracy 0,1 mm Rapid feed 30.000 mm/MPower 400 V / 4 kW Fully hydraulic machine Change speed 10 - 15 sec.  

Regulateurs Europe Europe, for engine 28/32. Serial number: 827286. 2 New And 3 Revised.

Antriebswalze 1 Stück / roller 1 piece Eurofold / Foldmaster Manufacturer Number: 235.100.321 Drive roller We offer different versions of rollers for Eurofold 235 / 435 / Foldmaster 200 folding machines Preis ist für eine Walze / Price is for one roller Art.: PS2811 depending on the one we have in the warehouse at the moment. They can be rollers with rubber rings or fully rubberized rollers. Fully rubberized rollers provide good adhesion to the paper and thus better paper transport. After your inquiry we will give you further information. Possible spare part number: 235.100.321 - Drive roller 235.000.889 235.000.888 435.100.001 235.000.887 For FoldMaster, ET numbers: 235.000.523 235.000.524 235.000.522 435.000.109

Europress EP 6500 V5 H4, pressing force 120 t, year of construction 2009, drive power 75 kW, only 15,334 operating hours, overhauled Specifications: Manafacture: Europress Type 6500 V5 H4 Year of construction: 2009 Operating hours 15,334 hours, as of January Number of pressed bales 138,097 bales, as of January Pressing force main press 120 t Specific pressing force 142 kg/cm² Dimensions insertion chute 1,650 x 1,100 mm Filling volume 3 m³ Filling volume / pressing cycle 1.58 m³ Bale dimensions 730 x 1,100 Length variable Drive power 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total connected load 83 kW Current consumption 150 A Binding 5-fold vertical, 4-fold horizontal, fully automatic Bale weights 450 to 900 kg, depending on bale length and material Hydraulic oil tank volume 1,200 L PLC control (manuf., type) Siemens S7-200 Control Panel (Manufactur ...

Gear motor SEW-Eurodrive KA86 DT100LS-4 -Gear motor -Manufacturer : SEW- Eurodrive -Type:KA86 DT100LS-4 -RPM 1400 / 19 -for more details see picture with nameplate

Key data: 90

Extruder 1 spindle Brand: Eurotecno, 90 mm Ø, 33 L/D. Electrical panel, filter changer: 160 mm, wire head for graining, stainless bathtub: 3 m, without motor. Eurotecno noodle model G-400 with blades: 300 mm.

-Gearbox manufacturer: SEW Eurodrive R82-62-V01 -Manufacturer motor SEW Eurodrive type: VUF1DT80K-4 -Motor power: 0.55 kW -Speed range: 0.72-4.3 rpm -Motor: adjustable -height of the shaft axis: 180 mm -Drive shaft: O 50 mm -Quantity: 1 piece of motors available -Price per piece -Dimensions: 800/290/H520 mm -Weight: 108 kg

CNC punching machine equipped with a Euromac TopPunch control unit. Italian manufacturing Capacity 300kn Machine with annual reviews carried out, very good condition of use Machine width: 3970 mm Machine depth: 3430 mm Machine weight: 8400 kg CNC: Euromac TopPunch Punching force: 300 kN X axis movement: 2250mm Y axis movement: 1250mm Main electronic connection: 400 V / 50 Hz Power consumption: 7.5 kW Automatic repositioning on the x axis: up to 10000 mm Number of d stations: 6 (including 3 index stations) Maximum number of tools in the turret magazine: 6 pieces Punching speed (nibbler mode): 780 1/min, Punching speed (20 mm stroke): 300 1/min Maximum sheet thickness: 5 mm, minimum sheet thickness: 0.5 mm Maximum blade weight: 150 kg brush table Safety barriers USB port Wide variety of tools included, with 2 multitool heads

General SKU018M362 LocationBarneveld MakeTBMA Europe B.V. TypeAS-175 No.79339 Year of constructionunknown Material Housing materialStainless steel Rotor materialStainless steel Main Features MaterialStainless steel Motor0.25 KW Inlet diameter175 mm Specified Features - Rotating valve MaterialStainless steel Rotary valve(1x) Rotor diameter175mm With hoppercheck With motor± 0,25 KW, 220/380 Volt With variable speed drivecheck Air purged sealingscheck Information Mounted on framecheck Floorspace0,8x0,7 M Total height1,1 MRotating valvesTbma EuropeRotary valves > Rotating valvesBrand > Tbma Europe What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

Euromac hydraulic punching press type CX 1000/30 rb.1998. Parameters : - pressure-max. 30 t - max. processed sheet in Y-X axis : 1000 mm x 10,000 mm (with repositioning) - steel sheet thickness 6 mm - max . diameter of punch station D-80 mm - 200 strokes per minute - CNC Control Euromac/Windows Type of working table: brush Number of grippers holding sheet metal: 2 Dimensions DxSxW: 4000x2800x1800 mm, Weight 5230 kg, drives 7.5 kW. Tools with the machine. Full technical documentation. Possible, installation and training of machine operation and after-sales service.

Machine Type: Punching/Nibbling Machine Manufacturer: EUROMAC Type: ZX INDEX Year of construction: 2007 Condition: used / good Offer will only be sent if a complete imprint is provided! Location Warstein , Germany Reference MV-KÖL-0424-3 DESCRIPTION We offer you a used CNC punching nibbling machine from the manufacturer EUROMAC. Working range X axis / 1250 mm Working range Y axis / 1000 mm Working range X axis with transfer / 2000 mm Punching force / 30 T Weight approx. 4900 kg further data on request. Availability: by arrangement Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers ...

This Euromac MTX Flex 6 Punching Machine was manufactured in 2014 in Italy. It has been working for only 3094 hours. It is equipped with a Euromac TopPunch control unit. This machine can operate with a punching force of 300 kN. It includes as additional equipment some drop tooling and safety light barriers, everything is brand new, never used. Also software is included. This machine like a new one.

Kat-No 09-1025 New! made of stainless steel Make: Eurolux -very stable experience -Your advantage: can be used as a base frame and as an interlayer frame -All-sided (also with pallet truck) can be underrun Mass and weight: Total height:390 mm Width:760 mm Length:1250 mm Weight:27 kg Price is valid for one item. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

Cat. No. 10-1070 New Complete continuous distillation and rectification plant (DRA) for the production of 10,000 Ltr/day - Fab.Eurolux Fine sprite or neutral alcohol made from starchy and sugary raw materials For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat. No. 06-1101-6 new with Floating Cover - round vertical on Feet Cat-Nr.06-1101-6 available : 5 Standard Features: • Manufacturer: Eurolux GmbH • Material: 1.4301 acc.DIN 17440 AISI 304, inside 3IIId = 2B – outside marbled • Surface fully pickled, passivated and neutralised • All welds are treated and not porous to prevent the occurance of unwanted bacteria. • Firm Legs that ensure stability of the whole vessel • Drain Port DN 50 • Level Indicator • Floating Lid with Accessories • Xiring-escape Valve • Air Pump • Transport Hooks for Lid on/off Volume: 1000 litres Diameter: 920 mm Height Cyl: 1500 mm Total Height: 1910 mm Feet Quantity: 3 Surcharges/unit: (Prices upon request) Butterfly Valve DN 50 Clap Lid Crane Support for Ladder Connecting Pipe for Clap Size 37 with Butterfly Valve DN 40=Clea ...

Cat. No. 11-4105 in very good condition Material: V2A - AISI 304, 1.4301- Surface: inside and outside 2B=IIIC Topsoil: with manhole pressure cap 1.5 bar test pressure DN 400 with 6 star head screws, with handle bracket, Threaded welding nozzle DN 50 Tank body: manhole 430x300 mm Underbody: Konusboden 45 with forward-drawn outlet pipe with disc valve DN 65, with forklift shoes, with stable frame, with pallet lift truck all sides underpassable. Test pressure: 1.5 bar Working pressure: 0.99 bar DxH: 1100 x 2200 mm - Weight: 230 kg Supplements/pieces (on request): Fermentation spandconnection DN 50 Euro Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our c ...

Cat.-No. 15-00013 in a very good condition Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Total Height: 1750 mm Height: 1250 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one unit. Surcharges/unit (price upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing unit NW 65/40 or 65/50 All prices are valid Ex-Works, excl.VAT F ...

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 870kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,495.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 with 2x3 each. Arms 1.20 m, 870 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 adjustable shelf arms each with centre of gravity 600 mm 870 kg per arm / 2610 kg per stalker with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors . Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 each. Arms 1.20 m, 500 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf armseached carrying capacity at load centre 600 mm 500 kg per arm / 2610 kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.750.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.900.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 each. Arms 1.20 m, 750kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3-adjustable helving armseached each carrying ability at load centre of gravity 600 mm 750 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Kragarmregal, one-sided, 3m height, 1.20m arms, 500kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.150.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf edges on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 500 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 500 kg = 2,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors.; New

Kragarmregal, one-sided, 3m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 750 kg per arm / 2250 kg per staender at 4 staenders per arm level 4 x 750 kg = 3,000 kg with laengs and diagonal connectors e = 1300 mm with a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! ; New

Kragarmregal, one-sided, 4,16m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.450.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 4160 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 720 kg = 3,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New