1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 831
item-No.: 126191978
Polar 76SDP, Maschine ist in einem guten Zustand, Digitalanzeige, 3 Ersatzmesser
Category: 103
item-No.: 126493866
x-travel: 1020 mm,y-travel: 300 mm,z-travel: 540 mm,spindle taper: MK 5,spindle speed:: 33-2170 / 36 step U/min,feed:: 12 - 254 / 9 step mm/min,clamping surface area: 1280 x 400 mm,table rotating: 30° links/rechts °,table adjustment:: längs/quer: 370/300 mm,table load: 1,0 t,support adjustment: 442 (vertical) mm,support adjustment: 650 (horizontal) mm,quill stroke vertical: 100 fräsen mm,quill stroke vertical: 100 stoßen mm,total power requirement: 5,5 kW,weight of the machine ca.: 3,18 t,dimension machine app ...
Category: 845
item-No.: 126178194
Universal stepped end and flush cut tuber 4 plies micorperforating units photo cell for preprinted paper stepped end and flush cut facility flat tubes and also gusseted tubes possible tube packeting station Tube width flush cut: 30-70 cm Tube width stepped end: 30-65 cm Tube length: 49,5-130 cm
Category: 104
item-No.: 126493364
grinding diameter max.: 40 mm,workpiece length: 700 mm,table adjustment: 0-50 mm,table adjustment: abrichten=25 mm,cross table: quer/transversal=80 mm,number of spindle speeds: 3000 U/min,total power requirement: 3,3 kW,weight of the machine ca.: 0,8 t,space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m,transport dimensions LxWxH: 1,5x1,5x1,5 m,Application area for types of grinding such as: 3 facet cut, cross cut, 3 edged drill countersinks, spiral drill right spin grinding area for drills Ø 5 - 40 mm  ...
Category: 101
item-No.: 126178182
-
18.000 €
Land-pt PT
Mandriladora Tos W100 Tos (Czechoslovakia) Model: W100 Year: 1972 Spindle: 100 mm Spindle: ISO 50 Rpm: Min 9rpm to 45 rpm Max: 45 rpm to 1120rpm Advances: Min: 0.025 to Max: 900 Vertical: 1250 mm Longitudinal: 2000 mm Transversal: 1600 mm Manga: 1200 mm Rotary table: 1250 mm for 1250 mm ISO 50 with Electric Tool grip. With 3-axis digital dish, boring, milling head support for between points with different accessories.
Category: 110
item-No.: 126493115
heating: 6 kW,rated current: 11,total power requirement: 7,6 kW,Total weight, approx.: 48 kg,dimensions L x W x H: 0,95x0,18x0,45 m,application area : water temperature control (system) description: - air heater with connection 4x ³/4 and 1x 1/8 - motor power 0,85 kW - heater 6 kW (D:0,45xW:0,26xH:0,43m) Anlage wird als Ersatzteilspender angeboten/verkauft!
Category: 102
item-No.: 126178171
Parallel lathe RAMO type T36 ET Between points 600 mm Maxi Ø on bench 360 mm Maxi Ø over saddle 180 mm Rotation from 31 to 1600 RPM 3-jaws chuck Ø 200 mm Threadings Metric + Witworth Tailstock CM4 Auto advances longitudinal + transverse Lubricant pump Voltage 380 V Dimensions (L x W x H) 1700 x 1100 x 1500 mm Weight approx. 1 T MACHINE IN OUR STOCK IN FRANCE.
Category: 101
item-No.: 126493372
x-travel: 1650 mm,y-travel slide: 750 ,y-travel bed: 3000,z-travel: 1850 mm,w-axis: 340 mm,U-axis: 1000 mm,diameter of clamping surface: 3000/5800 mm,turning diameter: max.6000 mm,revolution per minute: 1000-6000 U/min,control: Siemens 840D,workpiece weight: 200/100 t,max. workpiece diameter on pallets: 6000 mm,tool taper: HSK-A-100,total power requirement: 67 kW,weight of the machine ca.: t,space requirement of the machine approx.: m,annular ring and cylinder machining center vertical special CNC machining center  ...
Category: 101
item-No.: 126176136
Vertical machining centre Make: Hitachi Seiki Year of construction: 1996 Hitachi Seiki UK 45 II Control: Seikos M3 Traversable routes X: 1000 mm Y: 490 mm W: 500 mm Table size X: 1100 mm Y: 480 mm Tool holder: SK40 8000 U/min 20fold tool changer C0tcrzjnw Swarf conveyor
Category: 103
item-No.: 126492631
x-travel: ca. 740 mm,y-travel: 220 mm,z-travel: ca. 500 mm,throat: 280 mm,distance spindle nose and table: max. 500 mm,spindle taper: SK40,spindle speed:: 52 - 1500 / 8 step U/min,spindle head swivable left - right: je 90 °,clamping surface area: 1100 x 250 mm,total power requirement: ca. 6,0 kW,weight of the machine ca.: 1,3 t,dimensions of machine: 1700 x 1450 x 1700 mm,The spindle head is mountable vertical and horizontal. equipped: - coolant device - index head with chuck - machine ilumination accessories: div ...
Category: 104
item-No.: 126154527
11 units in stock precision internal grinding OVERBECK ZETTO 30 Built in 1971 clamping length of max 200 mm Clamping diameter of 100 mm Grinding diameter 0.8 to 80 mm,. Grinding length of 120 mm Dimensions: 1250 x 800 x 1300 mm
Category: 103
item-No.: 126493410
x-travel: 310 mm,y-travel: 170 mm,z-travel: 370 mm,table-size: 540x240 mm,clamping surface area: 465x175 mm,feed: x-Achse 14-25-52 m/min,revolution per minute: 67...1250/16 step U/min,tool taper: TGL7836,total power requirement: 1,6 kW,weight of the machine ca.: 860 kg kg,transport dimensions LxWxH: 1,35x1,1x1,6 m,working area distance: - table/column:95mm - horiz. spindle/clamping area: min./max.=20/325mm - horiz. spindle/under edge counter holder bar:70mm table tiltable right & left 30 degrees accessories: 1x too ...
Category: 103
item-No.: 126133152
x trail 1120 mm y way 355 mm z-way 400 mm Table size 400 x 1600 mm Table load 1500 kp ISO spindle adaptor 50 Bcmoqcgzqi Distance spindle/clamping surface of maximum 600 mm Feeds - longitudinal and transverse 16-800 mm / min Feeds - vertical 5-250 mm / min Rapid traverse - longitudinal/transverse/vertical 3150 / 1000 mm / min Speed range 28-1400 RPM Voltage 380 V / 50 Hz Total power 14.5 kW 11 kW Machine weight approx. 4,1 t Space requirement approx. 3.5 x 3.5 x 2.2 m
Category: 104
item-No.: 126492909
grinding length: 450 mm,centre height over plate: 125 mm,workpiece length - max.: 600 mm,grinding spindle - swivable: 350 °,grinding head adjustable: 15° re/li mm,spindle revolutions per minute : 2200/3500/5200 U/min,adjustment of spindle-head: quer/transversal 230 mm,adjustment of spindle-head: vertical/vertical 250 mm,grinding diameter: 250 mm,work table:: 950x120 mm,table movement: längs/longitudinal=500 kW,table adjustment: 45° re/li °,dimensions of hydaulic: 0,6x0,5x0,9 mm,total power requirement: 1,12 kW ...
Category: 103
item-No.: 126114447
1975
6.900 €
-
Milling machine - universal lid FP 3 bearing no 1105-01484 category milling machine - universal make lid type FP 3 year 1975 State second-hand machine control conventional storage France country of origin Germany delivery immediately Frachtba SIS stock technical details x way 500 mm y way 380 mm z-way 300 mm speed 40-2000 RPM gearbox stage 18 Toolholder SK 40 vertical table size 900 x 255 mm table size 800 x 420 mm feed range 10-500 mm / min rapid traverse 1.5 m / min Total connected load approx. 4 kVA machine we ...
Category: 201
item-No.: 126487520
2001
used machinery auction RESALE 160 €
Land-es ES
Weight approx.: 400 kg Dimensions (l x w x h) approx.: 2030 x 1500 x 1600 mm Description: Serial number 55410904, Motor 3 kw-2800 rpm, Swiveling head, Tilting head, Longitudinal cutting capacity approx. 710 mm, Transversal cutting capacity approx. 640 mm, Blade saw diameter 350 mm, Bore diameter 30 mm, Cutting max. height approx. 100 mm, Mounted on metal support with wooden work table with dimensions 2030 x 820 mm
Category: 102
item-No.: 126114417
-
11.000 €
Land-pt PT
Lathe TUR 50 FAT Fabryka Automatów Tokarskich Ponar-Wrocaw. Restored equipment and in great condition. -Prismatic Bus on both sides -90 mm spindle Bore, -3 315 mm clips bushing, -Fixed and Mobile Bezel Bezel -4 plate eccentric clamps Lathe TUR 50 technical parameters: -Diameter of maximum rotation on the bus: 500 mm, -Maximum Diameter of rotation about the car: 300 mm, – Distance between points: 1500 mm, -Bus width: 432 mm, -Revolving Morse: 5, -Speed: 18-1800 rev/min, -1st gear speed range ...
Category: 203
item-No.: 126487541
1996
used machinery auction RESALE 450 €
Land-es ES
Weight approx.: 850 kg Dimensions (l x w x h) approx.: 1500 x 2000 x 1050 mm Description: Serial number 731, Total installed power approx. 7 kw SURFACE PLANER: Working width 300 mm, Table length 1500 mm, Entrance table length 730 mm, Spindle with 3 knives, Spindle speed 5300 rpm, Fence tilting with dimensions 1300 x 100 mm, Motor power 2.20 kw THICKNESS PLANER: Working width approx. 300 mm, Table length 550 mm, Maximum working thickness approx. 230 mm, Feed speed 7 m/min CIRCULAR SAW: Max. blade saw diameter 250 mm ...
Category: 103
item-No.: 126476548
x-travel: 2000 mm y-travel: 900 mm z-travel: 530 mm Control: Bosch CC 100 M milling spindle: Ø 100 mm turning speeds: 25 - 3550 U/min feed range: 1 - 7000 mm/min rapid traverse longitudinal and cross: 10000 mm/min rapid traverse vertical: 7000 mm/min weight of the machine ca.: 12,5 t Vices as seen on pictures are not included. This ad was created with MODUL MWS - the software solution of LogoTech.
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more ERSA types: