1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 205
item-No.: 126327290
Drilling machine for furniture fittings universal boring machine with 4 engines 2 motors from the top motor strengths 1 x 0.8 kW and 1 x 2,0 kW 2 engines from below Motor strength 1 x 1,5 kW and 1 x 1.1 kW Each motor individually switched 5 pneumatic mounts up stroke with foot switch Einlegehöhe maximum 60 mm dimensions L 2760 mm x W 700 mm H x 1570 mm
Category: 103
item-No.: 126553708
1985
used machinery auction RESALE 750 €
Land-de DE
Weight approx.: 1800 kg Dimensions (l x w x h) approx.: 2500 x 2300 x 2000 mm Description: X-travel: 500 mm Y-travel: 450 mm Z-travel: 385 mm Control: HEIDENHAIN TNC 151 Rapid traverse: 3000 mm/min Table dimensions: 450 x 800 mm Tool holder: SK 40 Speed: 3150 rpm Number of T-slots: 9 T-slot distance: 45 mm Total connected load: 9 kW Operating hours: 52041 h Machine vice is not part of the delivery!
Category: 102
item-No.: 126327258
Swing over bed: 1250 mm maximum turning length: 2000 mm swing diameter over support: 930 mm The machine is in good technical condition, after agreement possibility of testing. Universal lathe SUA 125 digital is digital machine for the roughing controlled intended and sizing, drilling, works on the shaft and flange components for tapping turning of pins and various shape rotation ploch. Stroj starr trained a horizontal bed, bed the Guide surfaces are hardened and cut, the counter on the longitudinal carriage is cov ...
Category: 104
item-No.: 126550444
grinding wheel diameter: 200 mm,grinding wheel width: 20-25 mm,total power requirement: 1,0 kW,weight of the machine approx.: 140 kg,space requirements of the machine approx.: T:0,53xB:0,78xH:1,15 m,bench grinder construction version on a steel frame application for normal grinding, center grinding, step drill grinding - drill swiveling arm 118-135-170°, longitudinal adjustment approx. 80mm, transversal adjustment 40mm - equipment: grinding protection via transparent protection shield on both sides
Category: 105
item-No.: 126313397
DG244/02, 6M CUTTING LENGTH, 5 AXIS DOUBLE HEAD CUTTING OFF MACHINE, WITH CONTROLLER E555 The machine is optionally included, Hydro-pneumatic saw feed The reliable elumatec principle "Cutting from below": Provides unhindered access to support table A large saw blade diameter and optimal use of the saw blade offer an ideal cutting capacity for all cutting variations Standard for elumatec: External dimension cuts at all angle positions. This means no length calculations are necessary when cutting profiles of ...
Category: 103
item-No.: 126503834
x-travel: 630 mm y-travel: 420 mm z-travel: 380 mm surface area: 800 x 500 mm Machine No.: 00292376 dimensions: 3200 x 2100 x 1700 mm dimension tools:: 1850 x 1200 x 1900 mm weight of the machine ca.: 2700 kg This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 103
item-No.: 126312920
X-travel: 6000mm, y-travel: 3000mm, z-travel: 800mm, length: 11325mm, width: 6285mm, height: 3800mm, weight: 55t, available after December 2018.
Category: 102
item-No.: 126493185
turning diameter over bed: 660 mm,turning diameter over support: 320 mm,turning length: 1500 mm,center height over support: 160 mm,control: FANUC N.E.F,spindle bore: 103 mm,revolution per minute: 9-1800 (24 Stufen) U/min,spindle taper: nach DIN 55022 Gr.11,bed guideways length: 1800 mm,total power requirement: 22 kW,Weight approx.: 5,5 t,space requirement of the machine approx.: L:5,05 x B:4,55 x H:1,8 m,universal lathe additional information: Length of the bed guideway : 1800 mm Quill adjustment by hand: 225 mm Po ...
Category: 103
item-No.: 126312918
X-travel: 6000mm, y-travel: 3000mm, z-travel: 600mm, spindle table distance: 200-800mm, frame opening: 3600mm, feed rate: 5-10.000/min, rotational speed: 10-3000mm, number of tool slots: 26, tool mount: SK 50, control: SIEMENS SINUMERIK, available after December 2018.
Category: 103
item-No.: 126492676
x-travel: 875 mm,y-travel: 500 mm,z-travel: 500 mm,B-axis (table): 360° mm,control: Heidenhain TNC 410,spindle taper ISO: 40,quill stroke vertical: 75 mm,distance between column - table edge: 190 (fest) mm,distance between table/spindle: min/max: ca. 100/600 mm,turning speed range: 20 - 7000 U/min,feed:: 15 000 mm/min,rapid traverse: 15 m/min,Table dimensions: Ø 500 mm,table swivelabel +/-: 30 °,table load: 300 kg,total power requirement: 14 kVA,weight approx.: 4500 kg,dimension machine approx.LxWxH: 2,39 x 2,03 ...
Category: 203
item-No.: 126258307
2009
9.500 €
-
combined Planer Thicknesser motor-driven height adjustment toothed lips of table, extension table for set 4 Tersamessser, rubber rollers extract digital display
Category: 103
item-No.: 126493205
x-travel: 500 mm,y-travel: 400 mm,z-travel: 400 mm,clamping surface area: 900x450 mm,range of revolution per miute: 0 - 2000 U/min,quill stroke: 80 mm,feed range: 12,5 - 500 mm/min,tool taper: SK 40,total power requirement: 6,5 kW,weight of the machine ca.: 1,8 t,dimension machine approx.LxWxH: 1,8x1,7x1,9 m,transport dimensions LxWxH: 2,0x1,8x1,9 m,DRO control Heidenhain with digital display travel adjustment manual: longitudinal x-axis 600mm transversal y.axis 450mm vertical z-axis 450mm technical error sale as i ...
Category: 209
item-No.: 126249787
Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments The machine is equipped with: Pre-milling aggregate; Aggregate; Aggregate cutting off the periphery; Milling aggregate - up (collects excess edging); Aggregate milling-down; Universal milling machine; Nuting aggregate; Aggregate rounding up / down; Scraper; Flat scraper for glue grout + application of cleaning agent + polishing unit Detailed information ...
Category: 104
item-No.: 126493213
grinding diameter: 320 mm,grinding length: 400 mm,centre height: 160 mm,Grinding-wheel diameter: 700 mm,workpiece weight: 350 kg,control: PS TESLA NS - 915,total power requirement: 24 kW,weight of the machine ca.: 5.5 t,space requirements of the machine approx.: 3.5x2.2x2.8 m,bevel cut-in grinding machine with loading Magazine sale as is! Vekauf wie steht. Als Ersatzteilspender. DOCUMENTATION AVAILABLE
Category: 103
item-No.: 126235452
1992
135.000 €
-
Milling machine - universal MAHO MH 700 S bearing no 1105-02436 category milling machine - universal make MAHO type MH 700 S built in 1992 State second-hand machine control CNC CNC 432 storage HAGUENAU country of origin Germany delivery immediately Frachtbas is stock technical details x path 700 mm y-way 500 mm z trail 500 mm speed range - continuously 4500 RPM spindle taper Sk40 Quill stroke 100 mm feed continuous 1-3000 mm / min rapid traverse 6 m / min control CNC 432 machine weight approx. 4.5 t of rotary table ...
Category: 110
item-No.: 126493730
floor-plate length: 500 mm,plate width: 500 mm,plate height: 205 mm,weight of the machine ca.: 313 kg,dimension L-W-H: 585 x 635 x 205 mm,The clamping table has 2 supports (longitudinal and transversal). - radial scale / fine gauge display 0.02mm by hand crank - T-slot according to DIN 650: a = 15.5mm, h = 29,0mm, b = 28,0mm, c = 12mm, 5x longitudinal and 5x transversal, center stand = 100mm - foot dimension L: 500 x W: 590mm, with flute on both sides Ø 22 x 24mm
Category: 106
item-No.: 126219716
Technical data: -Pressure capacity 300 t -Working width 3600 mm -Clearance between the stands 3150 mm -Ac table width. 250 mm -RADIUS 500 mm -Height 325 mm -Delivery speed 80 mm / sec. -Working speed 6 mm / sec. -Retraction speed 65 mm / sec. -Stroke 250 mm -Motor power approx. 22.5 kW -Oil approx. 300 l -Space requirement approx. B H 4000 x 2950 x H 2000 mm -Weight approx. 21000 kg -with: - swivel arm - operating Panel with graphic control bc40 -MOT. B ...
Category: 103
item-No.: 126492975
x-travel: 1640 mm,y-travel: 1070 mm,z-travel: 560 mm,control: Heidenhain TNC121,tool taper: SK50,table-size: 2920x700 mm,table surface area: 2040x700 mm,weight of the machine ca.: 5,5 t,total power requirement: 30 kW,range of revolution per miute: 28 - 1800 /18 Stufen/step U/min,dimension machine approx.LxWxH: 3,0x2,2x2,2 m,equipped with positioner and DRO system Heidenhain TNC 121 logitudinal measuring system Heidenhain LS 501, universal milling head 360° (manual 180° each side) feed movement of the axis is step ...
Category: 106
item-No.: 126219710
Technical data: -Pressure capacity 350 T. -Max working width 5050 mm -Stand through 4100 mm -Max mounting height approx. 400 mm -Stroke approx. 240 mm -Table width approx. 350 mm -Height approx. 1200 mm -Drive 400 V / 37.0 kW - space requirement approx. B H 5500 x 3390 x H 2300 mm -Weight approx. 36000 kg -with:-control CYBELEC DNC 50 Y 1 + 2 BJ. 2012 -Rear gauge - universal matrix -Highlight tool
Category: 110
item-No.: 126492469
table length: mm,table width: mm,table load: t,weight of the machine ca.: 4,0 t,machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m,Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm ...
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more ERSA types: