We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,030 used machines on RESALE, but how to find them? Machine Search
used
5 Axis Universal Machining Center with Nikken Rotary Tilt Sub-Device and Erowa Pallet system Manufacturer DMG Model DMU 100T Built in 2003 Control MillPlus IT Travel X / Y / Z 1080 x 710 x 710 mm Nikken rotary tipping table 32-fold tool changer / SK 40 Erowa Robot Easy Automation Integration with 12 stations and 31 units Erowa clamping systems
used
Sell a new Erowa angle head, this comes from a measuring machine and is therefore still very well preserved. No cooling medium or other liquid treatment. approx. dimensions 100mm100mm160mm high
used
Description: Lot of tool holder Uni holder ITS 50 for eroding machines Manufacturer: Erowa, Lot of tool holder Uni holder ITS 50 and system accessories for eroding machines Approx. Onsite Dimension. (l x w x h): 600 x 400 x 200 mm, weight approx.: 10 kg
used
Description: Tool holder with base plate EROWA, system 3 R, in holding device, 12 pieces Approx. Onsite Dimension. (l x w x h): 300 x 200 x 150 mm, weight approx.: 15 kg
used
Description: Tool holder with EROWA base plate, System 3 R, in holding device, 12 pieces Approx. Onsite Dimension. (l x w x h): 300 x 200 x 150 mm, weight approx.: 15 kg
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Longitudinal travel (X-axis): 1020 mm Vertical travel (z axis): 1020 mm Axial motion:: C = 240° Voltage 50 Hz 3x: 400 Volt Driving motor (motor power): 1.1 kW Total power required: 3 kVA Dimensions: Length: 2200 mm Width: 1300 mm Height: 2230 mm Description: Rotary Magazin 30 x ITS 148 + 150 pos 50x50
used
Description: Clamping surface 300 x 300 mm Approx. Onsite Dimension. (l x w x h): 400 x 350 x 80 mm, weight approx.: 15 kg
used
Description: Clamping surface 300 x 300 mm Approx. Onsite Dimension. (l x w x h): 400 x 350 x 80 mm, weight approx.: 15 kg
used
Description: Clamping surface 300 x 300 mm Approx. Onsite Dimension. (l x w x h): 400 x 350 x 80 mm, weight approx.: 15 kg
used
Description: Clamping surface 300 x 300 mm Approx. Onsite Dimension. (l x w x h): 400 x 350 x 80 mm, weight approx.: 15 kg
used
Description: Clamping surface 320 x 320 mm, in wooden box Approx. Onsite Dimension. (l x w x h): 400 x 350 x 80 mm, weight approx.: 15 kg
used
Description: Measuring probe, in wooden box Approx. Onsite Dimension. (l x w x h): 230 x 140 x 140 mm, weight approx.: 5 kg
used
Description: 2 measuring probes, in wooden box Approx. Onsite Dimension. (l x w x h): 230 x 140 x 140 mm, weight approx.: 5 kg
used
Description: in wooden box Approx. Onsite Dimension. (l x w x h): 200 x 140 x 100 mm, weight approx.: 5 kg
used
Description: with the dimensions 90x90x80 mm , Approx. Onsite Dimension. (l x w x h): 90 x 90 x 80 mm, weight approx.: 5 kg
used
Description: Consisting of approx. 33 parts Diameter: approx. 150 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 200 mm, weight approx.: 200 kg
used
Description: Workshop shelf with EROWA base plate Approx. Onsite Dimension. (l x w x h): 900 x 450 x 1,800 mm, weight approx.: 30 kg
used
Control:Renishaw UCC 5.5 Accuracy of the measurement (4,5 + L/200) ?m Manual Probe Heads Renishaw MH20i Axis travel range: X 700 mm Y 700 mm Z 500 mm reference sphere included Erowa clamping system is available Made in Italy
used
This FEHLMANN PICOMAX 95 + EROWA Vertical Machining Center was manufactured in the year 2006 in Switzerland. It is equipped with a HEIDENHAIN iTNC control unit and has 5 axis. The machine has a spindle speed of 50-14000 rpm.
used
Tool changerType of gripperDouble gripper Tool changer planevertical Number of tools90 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Floor space/WeightWeight approx.12400 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot wi ...
used
GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal400 mmCross400 mmVertical375 mmTechnical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightWeight approx.6800 KgDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mSpindle speed 28.000 rpm HSK-A63Spindle speed 20 up to 28.000 U/min Motor spindle with shaft cooling power 30/20 kW // 40.23hp/ 26.82 hp (40/100% DC) torque 40/27 Nm (40/100% DC) tool clamping HSK 63 according to DIN69893 (different from standard)Chain-type tool magazine 60 po ...
used
Automation cell consisting of a Zimmer & Kreim Genius 700 die-sinking EDM system and the Chameleon handling system. - Travel: 400 x 350 x 350 mm - Table: 575 x 500 mm - Workpiece weight: 700 kg - Generator Genius 700 with automation Chameleon - 52 amps generator power - Rotating spindle - Internal controlled heat exchanger - Fire extinguishing system Kraft & Bauer - Extraction unit - Control unit for automated or manual pallet carriers - EROWA quick-action chuck ITS Automation system Chameleon with: - Chameleon base unit - 2 x rails - 2 x magazine - 195 electrode positions ITS EROWA - 10 UPC pallet positions EROWA or PARTOOL - 1 loading drawer - Identification system - EROWA double rotary gripper ITS - EROWA pallet gripper UPC / PARTOOL Process control system - JOBmodEDM - PROGmod - Comfort database - IDENTmod - SUPmod
used
Generator: MGH5 max.travel range: X 800mm Y 500mm Z 400mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 32 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er
used
Generator: MGF max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero
used
Generator: MGF2 max.travel range : X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode / parts changer: Erowa UPC 5 position, ITS 72 - 90 position, ITS 148 - 15 position cooling device for dial
used
Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode / parts changer: Erowa UPC 5 position, ITS 72 - 90 position, ITS 148 - 15 position cooling device for diale
used
Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er
used
Generator: MGF2 Max. Travel range: X 450mm, Y350mm, Z 350mm, C yes Clamping of tool: Erowa System ITS Clamping of parts: Erowa Sysem UPC Electrode / parts changer: Erowa UPC 10 position, ITS 72-90 position Cooling device, fire extuiguishing
used
Generator: MGF max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts: Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Erowa ITS / UPC Er
used
Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er
used
Generator: MGH max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero
used
Generator: MGH max.travel range: X 800mm Y 500mm Z 400mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 32 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Erow
used
Generator: MGH5 max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er
used
Generator: MGH max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero
used
For sale a fast and reliable 3-axis CNC milling machine with the possibility of adapting to 5, Erowa robot, fog extractor, spindle cooler, in very good technical condition included. No play in the working area. The spindle is in perfect condition. Data: - year 2008, - Andronic 2060 control, - HSK E 40 spindle (42,000 rpm) , 17KW, with cooling, - 40,000 machine hours, - 22,000 rg of spindle, - a warehouse with 40 places, - X 700 mm, - Y 550 mm, - Z 450 mm, - 3D probe, - BLUM gate for tool measurement and control, - USB, netzwerk and ethernet, - fog extractor, - load capacity 2000 kg, - full documentation. -country of origin Germany. Erowa X / R 50 robot for replacement of finished parts included. Adaptable to replace the second pallet. Additionally: Second cooler for parts, 60 pieces of HSK holders, two Swiss four-jaw chucks. It is adapted to work with CAD-CAM. ...
used
GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabinDMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampiTool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard)Number of tools 150Preparation measuring probe TS640 ...
used
Die Sinking Machine CHARMILES ROBOFORM 54P - C axis, automatic electrode change, Erowa, Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 600 mm, Cross travel y axis: 400 mm, Vertical travel z axis: 450 mm, C axis travel: 360 °, Working table size: 750x500 mm, Work tank dimension: 1200x800x460 mm, Automatic electrode change nr.: 16, Power supply: Charmilles, Max working current: 64 A, Filter type: Cartridge paper, Weight: 3.600 Kg, Accessories: EROWA Sistem
used
Description: Measuring range X, Y, Z-axis 400, 500, 350 mm, maximum workpiece weight 280 kg, maximum travel speed 250 mm/s, probe head RENISHAW PH6, diameter 19 mm, length 28 mm, 50 g, measuring software U-Soft, Solid Ultra, version 4.2, machine designed for EROWA tools, includes clamping plate EROWA ER-016092, pneumatically controllable weight approx.: 800 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 1,000 x 2,000 mm
used
X-travel: 550mm, y-travel: 400mm, z-travel: 400mm, max. rotational speed: 42.000/min, tool holder: HSK-40E, number of tool places: 100, connected load: 38kVA, controls: INGERSOLL ANDRONIC 2060, with tool measuring probe device m&h and tool laser measurement BLUM, automation with 8x EROWA UPC-320x320 pallet places and 140 EROWA-ITS50 electrode holder places, one adapter pallet UPC to ITS in automation, one gripper for ITS 50 in automation and job management via MultiCellPro additionally one external JobManagement PC.
used
Jig Ingersoll IG750 Bj1992; Travel 500 x 700 x 350 with 6-fold electrode changer for Erowa ITS copper + graphite electrodes.
used
EDM machine - X: 500 mm - Y: 295 mm - Z: 385 mm - C-axis: 360° - Clamping area: 780 x 500 mm - Spacing table - Pinole: 285 - 660 mm - Workpiece weight: 1200 kg - max travel speed X,Y,Z: 600 mm/min - Clamping system: EROWA - C-axis measurement resolution: 0.001° - Electrode changer: 16 -fold - Electrode changer: pick-up - Electrode weight: C-axis 20 kg - max. single electrode weight: 5 kg - Electrode changer total load: 40 kg - Dielectric cooler - Dielectric filter candles: 3 pieces - Dielectric filling height: 345 mm - Dielectric capacity: 450 l - Dielectric aggregate: separate - Generator: 30 A A - Control: EROCOM 200 - Fire extinguishing system - Total power: 8 kW - Machine weight: 4400 kg - Space requirement (W x D x H): 2.2 x 3.3 x 2.4 m - Condition: very good Details tested by Maho technicians, ready for demonstration under electricity, instru ...
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Positions APC: 0 CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 44574 Technical data Number of axis total: 5 Number of spindles: 1 Table load max.: 800 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 600 mm Vertical travel (z axis): 500 mm B axis swivelling range: +30 / - 110 ° C axis: 360 ° Tool magazine number of tools: 30 Tool diameter max.: 75 mm Tool lenght: 210 mm Max. tool-weight: 2.5 kg Spindle nose: HSK: E50 Spindle speeds: stepless from: 100 rpm up to: 36000 rpm Rapid traverse:: 30 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 12.5 / 22 kW Total power required: 28 kW Noise level: 75 dB (A) Machine´s weight about: 9500 kg Overall dimensions machine: Length: 4000 mm Width: 3700 mm Height: 2500 mm Various accessori ...
used
NEW MACHINE - AFFORDABLE and QUALITY SOLUTION Tool changer and C axis are in option. PRODUCT SPECIFICATION A. MACHINE UNITS 1. Work Tank Dimensions 940 x 550 x 350 mm 2. Work Table Dimensions 630 x 360 mm 3. X, Y, Z, Axis Travel 400 x 300 x 300 mm 4. Distance between main axis to table 410 mm 5. Built-in rotational C-Axis Travel 360° ( System 3R or EROWA) Option 6. Max. workpiece weight 500 kgs 7. Max electrode weight 50 kgs 8. Capacity of Dielectric 300 liters 9. Max. Machining speed 420 mm3/min 10. Min. Wear rate < 0.1% 11. The best surface finish VDI No. 0 / Ra 0.08 um 12. Max. Output Current 45A 13. Input Power 3.3 KVA 220/380/440 Volt, 3 Phase, 50 Hz 14. Machine L x W x H 155 x 140 x 225 cm 15. Total weight of machine unit 1450 kgs Packing Dimension CNC-C50E2 & ...
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Spindle speeds maximum: 0 rpm Feed maximum: 0 mm/min Positions ATC: 0 Positions APC: 0 CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 57489 Technical data Number of axis simultaneous: 5 Rotary table:diameter: 250 mm Number of spindles: 1 Table load max.: 25 kg Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 240 mm Vertical travel (z axis): 350 mm B axis swivelling range: +/-110 ° C axis: 360 ° Table speed: 250 rpm Clamping torque C-axis: 500 Nm Torque max.: 217 Nm Pallets chanching device:: EROWA ITS 148 number: 20 Diameter: 160 mm Tool changer: Number of tools: 68 Tool diameter max.: 65 / 30 mm Tool lenght: 155 / 100 mm Spindle nose: HSK: E40 Spindle speeds: stepless from: 100 rpm up to: 42000 rpm Work feed rate: 1 - 40 m/min Rapid traverse:: 42 m/min Air connect: 6 bar Voltage 50 ...
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Spindle speeds maximum: 0 rpm Feed maximum: 0 mm/min Positions ATC: 0 Positions APC: 0 CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 40317 Technical data Number of axis total: 5 Rotary table:diameter: 250 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 240 mm Vertical travel (z axis): 350 mm B axis swivelling range: +/-110 ° C axis: 360 ° Pallets:: EROWA ITS 148mm number: 20 Tool changer:: TCD Number of tools: 36 Spindle nose: HSK: 40E OptiCool Spindle speeds:: StepTec stepless from: 100 rpm up to: 42000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 40000 mm/min transversal from: 1 mm/min up to: 40000 mm/min vertical from: 1 mm/min up to: 40000 mm/min Rapid traverse:: 42 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 13 kW Machine´s weight about: 6500 kg Overall dim ...
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Working table: Length: 560 mm Width: 440 mm Max. dimensions of work piece: Length: 1130 mm Width: 510 mm Height: 260 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 318 mm Cross traverse (Y-axis): 218 mm Vertical travel (Z axis): 114 mm U axis: +/-48 mm V-axis: +/-48 mm U/V axis travel: 48 mm Taper-cut +/-: 30/65mm ° Diameter of electrode wire: from: 0.1 mm up to: 0.25 mm Forward feed for wire elctrode: from: 0.2 m/min up to: 15 m/min Max. coil weigth: 16 kg Dielectric aggregate: Empty weight: 4400 kg Contents: 240 l Generator: Cut capacity max. from: 300 mm2/min Voltage 50 Hz 3x: 380 Volt Total power required: 12 kVA Weight total installation approx.: 4500 kg Overall dimensions machine: Length: 3700 mm Width: 2600 mm Height: 2300 mm Variou ...
used
Machine in perfect condition, currently in operation. Machine price with Erowa charger and magnetic plates
used
Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA
GeneralUniversal machining centre; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal600 mmCross500 mmVertical500 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmDie and Mold Package linear incl. B-/C-TorqueDie and Mold Package linear incl. B-/C-Torque Dynamic package V-type Eagle timing belt for Z axis Torque table B-/C-axis including ATC AVD - Heidenhain or MVC - Heidenhain (starting NC 340590 11) APC and Top Speed - Siemens High End cooling unit for machiSpindle speed 20.000 rpm, HSK-A63Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min- ...
used
This OPS Ingersoll Gantry 5000 Erosion machine was manufactured in the year 2002 in Germany and has 72500 erosion hours. The machine has an Erowa IMC Robot for changing electrodes and workpieces.