emk used for sale

EMK T0200V Thermal oil boiler Serial: 1353 EMK Thermiflow thermo oil boiler, 232Kw, Max temp 300,C, 12.5 M3/H, 12MVK, comes with 1000l oil tank and pump

Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type EC2-HS160M2-2 -Motor power: 15 kW / 2935 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm -Weight: 395 kg

Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type T3C 160M2-2 built in 2021 -Motor power: 15 kW / 2940 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 530 x 580 mm / 580 x 470 mm -Quantity: 2x blowers available -Price per piece -Total dimensions: 950/800/H1215 mm / 930/820/H1220 mm -Weight: 395 kg/pc.

1 used and professionally dismantled cement conveyor screw type ELBA BZL 80/100 , built 1995, engine and gearbox New 2020, AA approx. 8.50 m, 1 spare piece 3.0 m, disassembled and cleaned Errors and intermediate sale reserved, sale from stock

tool adaptor: 50 mm driven tools: 5 Stück : 4 Stück : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1390 rpm -Shaft: Ø 14 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 250/160/H200 mm -Weight: 5.8 kg

Electric motor (new) Fabr. EMF Type H3S225S-4 380/730 Volt Motor 37/44,4 Kw 1480/1775 rpm

Plate dimensions: 250 x 120 cm Daylight opening: 400 mm total connected load: 20 kW Electro-hydraulic veneer press with Automatic switching and automatic opening. Pressing area: 250 x 125 cm Pressing pressure: 100 tons Cylinders: 6 pieces max. opening: 40 cm Weight: approx. 3,000 kg - ELKOM combination heating plates with gold anodized coating (Temperature settings can be controlled separately at the top and bottom) - EMERGENCY STOP contact strip under the press table - Cable emergency stop device The machine has been technically tested and is in a ready-to-use condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Servoelectric punching machine AMADA EMK 3610 NT Punching force 300 kN Working range: 2500 (up to 5000 mm) x 1525 mm AMNC F Control Max sheet thickness 4.5 mm Revolver with 58 stations: 24 x A (max diameter 12.7 mm) 24 x W (max. 31.7 mm) 4 x C (max diameter 50.8 mm) 2 x D (max. 88.9 mm) Automatic indexing: 2 x W (max diameter 31.7 mm) 2 x E (max. diameter 50.8 mm) Machine dimensions LxWxH: 5430 mm x 5120 mm x 2320 mm Machine weight 24500 kg

Wire electrode, SG2 welding wire, welding wire -Bohler: EMK 6 D - Wire Thickness: 0.8mm -Price per piece - Quantity: 2 pieces -Weight: 15kg

Cheese dividing machine DOMA KT3 EMF Specifications: 400 V / 50 Hz / 1.1 kW / 2.6 A 16A CEE Plug Year of construction: GÜ 2009 including knife insert for 4 parts Machine dimensions: H106 x W60,5 x D60,5 cm Diameter cheese loaf max. 40 cm Height cheese loaf max. 20 cm Function tested, machine immediately ready for use Stock machine, immediately available! Condition see original pictures! If you have any questions, email or call.

Welding smoke filter, welding smoke extraction -electrostatic filter -Extraction arm: 4000 mm -mobile

Gear motor TRAMEC, EMK HA 110 ( HA110 ) EC-JF90L-8 0,55 kW 5,6 rpm 220 - 240 / 380 - 420 V IP55 hollow shaft: Ø 42 mm used, tested ! Dimensions: 710 x 310 x 250 mm

Rack oven WINKLER, Type: Compact 1.8 -Genral overhauled- - Temperature control EMKO ESM 9944 - with gas or oil burner - for trolleys (580 x 780 mm) - Very good condition - completely overhauled - 6 months warranty - Delivery and installation possible Viewing and test run are possible by arrangement.

Jack handle, without closing, 10 pieces EMKA Handle length: 120 mm Thread: M22 x 1.5, length: 45 mm diameter: Ø 22 mm with flattening: 20 mm square: 8 x 8 mm Material: GD-Zn ( zinc die casting ), black powdered New ! Dimensions ( packaging ): 200 x 100 x 50 mm

Frame profile EMKA PROGRAM 1074 1074-02 Length: approx. 50 m Disc width: 6 mm Sheet width: 3 mm Profile height: 16,16,2 mm Material: EPDM New ! Dimensions ( packaging ): 650 x 450 x170 mm