eff used for sale

FPZ ABB motor: 3 kW Condition: after renovation

diameter: 220 mm Total height: 240 mm screw diameter: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extraction system, central extraction, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust air connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - pocket filter- Maintenance flap for filter change - Centrifugal fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg very good condition; used

Pallet shrink machine with shrink hoods that descends and completely covers the pallet during the shrinking process. Energy sources: natural gas or liquefied petroleum gas and electrically powered. Function: Driven curtain to close the shrink bell opening Pallet base plate with integrated breather and ramp for Loading by means of a hand pallet truck Catalytic heaters ( No free flame ) Maximum power 13 Kw/hour Max pallet dimensions (standard version) length 1,200; Width 1.200 Height 1,500 mm Number of cycles up to 25 pallets/hour Automatic shrinking process with adjustable shrinkage time Preheating time approx. 30 minutes Operating temperature approx. 200°C - 220°C depending on film thickness

Semi-automatic pallet wrapper S 140 Semi-automatic pallet wrapper Foil elongation adjustable by mechanical brake Gentle start-up and outlet of the turntable by means of frequency converter Four different winding programs are available: 1. Manual 2. Single spiral winding, 3. Cross spiral winding 4 Cross spiral winding with cover sheet Automatic height scanning of the pallet by light barrier Separate adjustment of the number of head and foot windings Precise turntable positioning through fixed-stop Load capacity of the turntable 1,200 kg Turntable diameter 1,500 mm max. winding height 2,100 mm (without hold-down) Turntable speed adjustable from 5 to 12 rpm. max. pallet dimensions: 1,200 x 800 mm (L x W) Voltage: 230 V 1 Ph, 50 Hz SPINNY S 140 can be easily tailored to customer-specific requirements and can be equipped with numerous additional features. Some examples: tur ...

Pallet wrapper ROTAX S3200 Electro-magnetic foil brake. In the standard version, the machine is used to protect palletized loading units of max. 1200 mm length, 1200 mm width with stretch film. The standard winding column is available for winding heights up to 2100 mm, on request, the winding height can be increased up to 3000 mm. The rotation speed is adjustable from 4 to 15 rpm The drive of the film carriage is also frequency-controlled and allows the up and down speed of the film carriage to be adjusted separately. The PLC control and additional control board offer ten winding programs, which can be estimated by password. Foil carriage protected by safety gear TECHNICAL CHARACTERISTICS ROTAX S3300 Driven pre-stretching system UP TO 300% In the standard version, the machine is used to protect palletized loading units of max. 1200 mm length, 1200 mm width with stretch f ...

Centrifugal pump, water pump DUE EFFE ES 75 motor: 0.55 kW 2800 rpm 220 / 380 V Dimensions: 300 x 180 x 290 mm

Door holding magnet, door magnet -Type: Mod. 838 -Voltage: 12 V - 1.8 W. -Weight: 1.1 kg

Max. pallet weight: 1.2t, length: 2500mm, width: 1500mm, height: 700mm.

Pneumatic cylinder, air cylinder, pneumatic ram, air ram, rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators -Stroke: 83 mm -Piston diameter: mm -Piston rod: 30 mm (connection thread) -Total length: mm -Total length extended: mm -Dimensions: 530/380/H380 mm -Weight: 26 kg

UPS Effekta Pegasus 200 kVA Uninterruptible power supply 3 phases Batteries were renewed 06/2019 and are tested all still have between 12.9 and 13.0 V and that after 3 months, are stored on a separate pallet the power supply is in 1A condition and does not come from the manufacturing industry 2 months return policy

Carrier Turbo Cold Water Kit, 19XR5251467, Y.O.M. 2800KW cooling capacity, from 20%-100% adjustable, latest model, very efficient, very good condition, ready to use immediately.

Siebler + Göring 5000/160E vertical four side seal strip packer for effervescent tablets, maximum foil width 160mm, currently fitted with handling and format parts for 20mm diameter tablets. Output up to maximum 150 strokes per minute. Includes a duplex module of ABB Flex-Picker robots for automatically loading an existing cartoning machine infeed (cartoner not included)

Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi Art.Nr .: 21022588 -Type: EFF -Condition: without complete housing, see pictures -Power: 22 kW -Voltage: 3 x 400 V -Dimensions: 440/300 / H400 mm -Weight: 18 kg

Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi Art.Nr .: 21028654 Type EFF -Power: 40 kW -Voltage: 3 x 630 V -Dimensions: 525/400/H310 mm -Weight: 26 kg

FPZ Effepizeta Motor: 5.5 kW Condition: after renovation

Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi Art.No.: 21023007 -Type: EFFK -Power: 30 kW -Voltage: 3 x 476 V -Dimensions: 460/350/H565 mm -Weight: 29 kg

Accessories for: heater fan, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi Art.Nr .: 21023007 Type EFFK -Power: 30 kW -without fan -Voltage: 3 x 476 V -Dimensions: 560/465 / H590 mm -Weight: 36 kg

Used Wiegand TVR-6-Effect + High Concentrator Evaporator., Previously used for whey., Still mounted inside the factory in Spain., 1.Effect, Diameter of the stage 1.050 mm, Diameter of the tubes 31 mm, Length of the tubes 10.000 mm, 2.Effect, Diameter of the stage 1.050 mm, Diameter of the tubes 31 mm, Length of the tubes 10.000 mm, 3.Effect, Diameter of the stage 1.000 mm, Diameter of the tubes 31 mm, Length of the tubes 10.000 mm, 4.Effect, Diameter of the stage 600 mm, Diameter of the tubes 41 mm, Length of the tubes 10.000 mm, 5.Effect, Diameter of the stage 450 mm, Diameter of the tubes 41 mm, Length of the tubes 10.000 mm, 6.Effect, Diameter of the stage 400 mm, Diameter of the tubes 41 mm, Length of the tubes 10.000 mm, High Concentrator, Diameter of the stage 400 mm, Diameter of the tubes 41 mm, Length of the tubes 10.000 mm, Including:, - High Concentrator., - Pumps., - Valves.,  ...

Used complete powder plant existing out of evaporator (4-effect, TVR), high pressure pump, spray dryer, packaging line in 25 kg bags and palletising robot., Previously used for whole milk powder (WMP). Line was running an input of ± 280.000 liters whole milk per day and an output of ± 28.000 kg of WMP per day., Still mounted inside the factory., The main components of the line:, - Evaporator, 4-effect, TVR, Manufacturer: Tebel - Van der Ploeg, Type: Falling film evaporator, Stages: 4-effect, Compression: TVR, Year: 1975, Capacity input for whole milk: ± 13.000 liter per hour (± 11,2% TS), Capacity output for whole milk: ± 3.000 kg per hour (± 48% TS), Capacity input for skim milk: ± 14.500 liter per hour (± 8,8% TS), Capacity output for skim milk: 3.000 ± liter per hour (± 48% TS), Capacity input for whey: ± 16.500 liter per hour (± 6% TS), Capacity output for whey: ± 3.000  ...

Documents installation-drawing.pdf Technical information Physico-chemical separation / distillation unit. Year: 2015 Installation ATEX 3G IIBT4, inside the installation: zone 1G Operating mode: continuous - batch - semi-batch. Pressure: Vacuum - 3 barg max Boiler size: 50 Litres (Possible 200 Litres) Flow rates: Approximately 180 Kg/hr feeding a water/ethanol mixture (90/10) at atmospheric pressure with a reflux rate of 5. Theoretical number of trays: 20 --> Possible feeding in 3 points: 4 structured packing beds, 4 liquid redistributors (3 with recenters) Dimensions: Unit made as a skid, in hot-dip galvanised steel frame with dimensions 2400 x2400 x 4000MM high. Utilities / sources : Steam: 3 bar eff 143?C 30 to 80kg/h Cold water 25-30?C : 2-5m3/h Chilled water 5-10?C : 0.5m3/h Compressed air : 6bar eff Nitrogen inerting : 4.5 bar eff Electri ...

Working width: 1400 mm Technical description: Operating side: right Working height: 900 mm, adjustable: +/-50 mm Width: 1400 mm EFF. Usable width: width 100 mm Clearance height: 120 mm Feed transport: 8.0 25.0 m / min frequency controlled Levelling roller: 0.7 5.7 m / min frequency controlled Material work piece: wood, wood, rigid Dimensions (min.) Thickness width length: 5 50 300mm Dimensions (max.) Thickness width length 80 1300 2000mm Tolerance max. Roller width +/-0, 2 mm Material coating: UV curable coatings and flowing coats Processing temperature: 18 ° c. Viscosity: up to 140 DIN sec, Ford 4 cups Drive type: Three-phase frequency inverter Power consumption: CA. 1,5 kW Mains voltage: 400 V / 50 Hz with power N-conductor Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar, min. 5 bar max. 8 bar Weight: 1.300 kg

Attachment: Schneider air compressor Compressor: UNM STV 460-10-200 t no.: T800-140 Suction power: 460 l / min EFF. Quantity: 375 l / min Final compression pressure: 10 bar Rated motor power: 3 kW Voltage: 400 v Frequency: 50 Hz Year of construction: 2008 Condition: mint condition - very good

UniMaster STS, die Platz sparende Lösung mit stehendem Behälter! Serienmäßig mit allen Armaturen, wie Elektromagnetventil oder Druckschalter mit Entlastungsventil für vollautomatischen Betrieb, Motorschutz, Sicherheitsventil, Manometer, Rückschlagventil, Kondenswasser-Ablasshahn und Absperrhahn Keilriemengetriebenes 2-Zylinder-Aggregat mit zweistufiger Verdichtung für 10 bar Druck erhöht die Leistung und sichert einen hohen Wirkungsgrad. Zwischen- und Nachkühler sorgen für eine rasche Abkühlung der erzeugten Druckluft Großes Ventilatorschwungrad für optimale Kühlung Technische Daten: - Druck 10 bar - Ansaugleistung 660 l/min - eff. Liefermenge 520 l/min - Antriebsleistung 4,0 kW - Drehzahl 1025 Upm. - Behältervolumen 270 l - Geräusch 78 db(A) - Abmessungen L=750, B=705, H=1800 mm - Gewicht 170 kg

UniMaster STS, the space-saving solution with a standing container! Standard with all fittings, such as an electromagnetic valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensation tap and shut-off valve V-cylinder driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures a high efficiency. Intermediate and aftercoolers ensure a rapid cooling of the generated compressed air Large fan flywheel for optimal cooling With refrigeration dryer and bypass line With complete module Öwadry, consisting of: refrigeration dryer, pre-filter and oil-water separator (only for DKS version) Safety tub optionally available Technical data: - Pressure 10 bar - intake capacity 660 l/min - eff. Delivery quantity 520 l/min - drive power 4.0 kW - speed 1025 rpm. - Container vol ...

Manufacturer: Hymmen, Type: JPT LW 2200/280, Operating system: Windowx XP, Software: K-Flow, Hardware: yes, AV Arbeitsplatz: yes, Bedruckbares Material: Papier,MDF,Kork, Working hight mm: 900, Nennbreite mm: 2300, Eff. Nutzbreite: 2100, Through running hight mm: max 50, Druckgeschwinidigkeit m/min : 25 (bei 360dpi), Anlagengeschwindigkeit m/min: 15-50, Single pass: yes, Year: 2010, Bedruckbares Material: Papier,MDF,Kork, Papiere: Rollenmaterial, Papierbreite min-max: 600-2100, Papiergewichte g/m²: 60-120, Papierrollendurchmesser max.: 800, Rapportlänge mm: 2600, MDF/HDF: yes, Fussbodendielen: yes, Werckstückdicke min-max mm: 5-17, Plattenbreite min-max mm: 500-2100, Plattenlänge min- max mm: 500-3000, Plattenwelligkeit mm: 3, Fussbodendielen: yes, Dicken mm min-max: 5-17, Längen mm min-max: 500-4500, Breiten mm min-max: 90-400, Welligkeit mm : 3, Tinten UV härtend: yes, Rollena ...

Mains time for servo amplifier -AC supply voltage: 18-110 V eff/47-63 Hz -DC intermediate circuit voltage: 24-155 V -Weight: 1.7 kg -Parts: from industrial returns, unchecked.

Here we offer a powerful reciprocating compressor from the manufacturer Schneider, including the matching control cabinet. Compressor is in very good condition and works perfectly. Specifications: Specifications Pressure 15 bar Suction capacity 1000 l/min Speed 995 min-1 Beh.-Vol. 500 l Weight 306 kg Noise 82 dB(A) Dimensions (WxDxH) 975x850x2020 mm eff. flow rate 790 l/min Air outlet 3/4"i Drive power 7.5 kW

Description: Demonstration machine. This oil-free and compact Hyundai compressor is light in weight and a super quiet operation. Very quiet, approx. 53-60dB (Suitable for the indoor area) Equipped with: - safety valve. - Pressure regulator with manometer and coupling. - Drain valve on the tank. - moisture separator. Delivery pressure 8 bar eff. Delivery rate 235/165 L / min Boiler volume 50/10 l / bar Machine weight approx. 22.5 kg. Number of cylinders 2 pcs. Motor 230V / 1.5KW V / KW Dimensions L-W-H 790 x 400 x 730 mm Approx. Onsite Dimension. (l x w x h): 790 x 400 x 730 mm, weight approx.: 37,5 kg

Description: Maintenance-free and oil-free compressor: - safety valve. - Reduction valve with manometer and clutch. - Drain tap on the tank. - Italian compressor of the highest quality. Delivery pressure of 8 bar eff. FAD 120/220 L / min Boiler capacity 50l / 10bar l / bar Machine weight approx. 24 kg. Number of cylinders 1 pc. Motor 230V / 1.5KW Approx. Onsite Dimension. (l x w x h): 1,100 x 320 x 350 mm, weight approx.: 24 kg

Description: This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB (Suitable for indoor use) Equipped with: - safety valve. - Pressure regulator with pressure gauge and coupling. - Drain valve on the tank. - moisture separator. Delivery pressure of 8 bar eff. FAD 125/85 L / min Boiler capacity 24/8 l / bar Number of cylinders 2 pcs. Motor 230V / 0,75KW V / KW Approx. Onsite Dimension. (l x w x h): 600 x 310 x 510 mm, weight approx.: 22,5 kg

Description: compressor Delivery pressure 8 bar eff. Delivery quantity 250/350 L / min Boiler capacity 200l / 10bar l / bar Machine weight approx. 105 kg. Number of cylinders 2 pieces Motor 230V / 2.2KW Dimensions L-W-H 1140 x 510 x 920 mm Approx. Onsite Dimension. (l x w x h): 1,140 x 510 x 920 mm, weight approx.: 105 kg

Description: Low-noise construction compressor 53 - 60dB Delivery pressure 7 - 9 bar eff. Delivery quantity 230/130 l/min l/min Boiler capacity 10 l / bar Machine weight approx. 25 kg. Number of cylinders 2 pcs. Motor 230V / 1.4KW V / KW Dimensions L-W-H 600 x 310 x 510 mm Approx. Onsite Dimension. (l x w x h): 600 x 310 x 510 mm, weight approx.: 25 kg

Description: Mobile low-noise compressor 53 - 60 DB (A) Delivery pressure 8 bar eff. Delivery rate 85/120 L / min Tank capacity 10 l / 8 bar l / bar Machine weight approx. 21 kg. Number of cylinders 2 pcs. Motor 230V / 0.75KW Dimensions L-W-H 465 x 380 x 575 mm Approx. Onsite Dimension. (l x w x h): 465 x 380 x 575 mm, weight approx.: 21 kg

Description: Quiet professional 30 liter compressor Noise level approx. 40 - 45 DB (A) This compressor is delivered as standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve at the bottom. Delivery pressure 8 bar eff. Delivery quantity 120/85 L / min Boiler capacity 30 l / bar Machine weight approx. 50 kg. Number of cylinders 2 0 Motor 230V / 0.75KW V / KW Dimensions L-W-H 570 x 640 x 800 mm Approx. Onsite Dimension. (l x w x h): 570 x 640 x 800 mm, weight approx.: 50 kg

Description: Low-noise professional 50 liter compressor Noise level approx. 40 - 45 DB (A) This compressor is supplied as standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve below. Delivery pressure 8 bar eff. Delivery rate 200/175 L / min Boiler volume 50 liters Machine weight approx. 77 kg. Number of cylinders 4 pcs. Motor 230V / 1.5KW Dimensions L-W-H 580 x 780 x 820 mm Approx. Onsite Dimension. (l x w x h): 580 x 780 x 820 mm, weight approx.: 77 kg

M. No.: 91080-41861 // Power: first 70 Sec. Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...

Roller splitter type RGS 25, RGS 35 and RGS 50 For the efficient recycling of residual and scrap rolls from the paper/packaging industry, printing companies, etc. The hydraulic roller splitter is suitable for cutting paper, cardboard and plastic foil rolls/balls, as well as for aluminium foil and is mainly used for the recycling of residual and scrap rollers, as well as for the crushing of start-up clumps. The roller cutters are available in various performances in terms of cutting force and roller dimensions. Rolls with a maximum width of 3,000mm and a diameter of 1,200mm can be processed. Special models for processing rolls with particularly large dimensions are also available. As an experience, we offer special material feeding techniques, as well as automated feeding and removal techniques. With regard to personal/occupational protection, we offer optional prot ...

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

Cold water set water-cooled, turbo-cooling machine, Carrier 19XR5556, R134a, 400V 50Hz,Bj 2001,ca 2500KW (700ton)Cooling capacity, little operating hours, always maintained,very good condition, super efficiency.

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

High-pressure link pump with sliding ring seal - unused - (only one test run) self-priming, multi-stage Manufacturer: Dickow Type: HZS 1023 Built: 1986 Conveyor medium: Fuels Capacity: 60 m3/h Head: 60 m Power: 13.9 kW Temperature: 20C Application: Diesel - 3-stage pump of 60-120 m3 adjustable - impeller diameter 236 mm, - 1,450 rpm - EX-gun motor, 10.5 kW (Felton & Geom) General The self-priming, single- or multi-stage DICKOW link pump has been specially developed for the conveying of hydrocarbons in refuelling plants. HZS pumps are used in tank depots, for emptying tank wagons, filling high tanks, in hydrant systems at airfields, in airfields and many other applications where geodesic suction heights have to be overcome. The performance characteristic field has been graded in such a way that the most favourable efficiency is achieved in all application ...

Year: 1989 Type: Monoblok VKVCF 72/12 Bottle type: 0,5l glass Efficiency: 28500 b/h Operation mode: pressure Technical data: -72 filling valves -12 crowning heads -double evacuation -vaccum pump

The TCAP 21 ReCap 2 is a high quality and cost efficient closing solution. For Fillers with PT the ReCap 2 combines needs in quality and cost. Additional the Product get a real functional and save closing solution.

Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley

he next development step of the basic opening solution in new shape and design for better usability. Better product flow is one of the key features. TCAP 21 ReCap 3 is a high quality and cost efficient closing solution. For Fillers with PT the ReCap 2 combines needs in quality and cost. Additional the Product get a real optimized functional and save closing solution. Option: Conveyors and Cardboard Packer with or without Wrap Around, Tray Shrink, etc...

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...