edge banding machine used for sale

Magnopro I-CUT12090 Fully automatic die-cutting + creasing of folding cartons Year of construction 2022 Connection 230 V Material thickness depending on model: 10 mm Data format PLT, DXF, HP/GL, PDF, EPS Feeder Sheet feeder for suction air/unwinding device (opt.) max. format: 90 x 120 cm Dimensions W x D x H: 320 x 150 x 115 Alignment CCD Camera System Speed up to 1000 mm/sec Positioning suction belt Programming barcode reader, QR code Accuracy +/- 0.1 mm Bow and roller feeder !

Inv. Num. : 7770 Type: KFU 3000 Producer: Zayer Created: 1990 Parameters: Operating system: HEIDENHAIN TNC 415 B Table length: 3000 mm Table width: 1000 mm Maximum table load: 10000 kg Max. Speed: 3000 1/min Axis X: 2700 mm Axis Y: 1000 mm Axis Z: 1000 mm Machine dimensions: 4000 x 2500 x 2800 mm Weight: 18600 kg Equipment: Staples (approx. 40 pieces) Vises (2 pieces) Angle (2 pieces) Clamping Blocks (2 pieces)

Motor 2.8 kW/380 V/50 Hz, work table 1250x350 mm, 2 pneumatic hold-down holders, 2 drilling levels pneumatically switchable, limitation adjustable at the bottom/top, stop to the left of the table 1450 mm, locking ruler 16 left/16 right, 16 mm spacing, feed drill with foot pedal, suction nozzle D=80 mm, incl. 3 pieces of multi-spindle drill heads

Height 2120 mm Width 1580 mm Length 2250 mm Weight 1600 kg Capacity 3600 kg/h Power supply: 400V 50Hz 3N Total power 6 kW Main Material Stainless steel, acid-resistant Hopper capacity 240 l Loading Loading integrated into the machine Sausage wrapper Comes complete with the machine Product Administration Method Vane Rotor Stuffer Type Vacuum Stuffer

Used Roll Splitting Machine Manufacturer: BOA Type: RSM 40 t specifications: Roll width max.: approx. 2,600 mm Roller diameter max.: approx. 1,550 mm Drive power: 18.5 kW Cutting force: approx. 40 t Machine weight: approx. 5,500 kg including: Feed and take-off conveyor belt Drive power: 1.5 kW each Weight approx. 2,500 kg

2 KW, 400 V, 50 Hz, 3-knife shaft 250 mm, Chip removal max. 3 mm, Thickness height max. 180 mm, Dressing tables each 525x255 mm, Thickness table 600x250 mm, Dressing stop adjustable up to 45°, Suction nozzle 100 mm, Weight 147 kg

Inv. Num. : 7723 Type: ZRM9 Producer: Ernst Grob Generated: Parameters: The machine is used to produce involute grooves by extrusion. Accessories: Several grave goods Universal Gear wheels

Refurbished Machine for Sale Machine was completely dismantled and rebuilt. All wear parts -ball bearings-bushings-etc. new Electrics new, motors rewound and checked. Measurement protocol available. Sold with a 6-month parts warranty. Old machine can be taken back. Tank cars are also available. Offer is "without boiler" More images possible if needed

Inv. Num. : 7762 Type: TruMatic L 3030 Producer: Trumpf Created: 2005 Parameters: Maximum power: 2 kW Work table length: 3000 mm Work table width: 1500 mm Machine height: 2000 mm Machine length: 9800 mm Machine width: 5300 mm Machine weight: 19000 kg

Machine Type: Door Belt Drilling Machine Manufacturer: Pressta Eisele Type: Multyfor M Year of Make: 1996 Condition: used and functional / main switch toggle defective / coolant bottle missing. Offer will only be sent if a complete imprint is provided! Price 1.250 Euro incl 19% VAT Vb Location Warstein , Germany Reference M-PRE-0724 DESCRIPTION We offer you a used multi-spindle drilling machine from the manufacturer Pressta Eisele. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Offer 24339 Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact disc / grinding roller for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Proportionalventile Moog Proportional Moog Moog Proportional Valves Moog No. D662Z2768D Type F02HX3MGNEA2 Moog No. D061-7000D Type J15H08MEVAR Moog No. D662Z2768D Type F02HX8MGNEA2 Moog No. D061-7000D Moog No. D662Z4704 Type D02HXBM5NEA2-M Moog Nr. D061-9330 Type J15K0BM4HM1 Moog SN. 114995 No. D661Z736A Type D80HX3MGN0A0 Moog SN. 200539 No. D681Z4707B Type P80HXUR5VEA2-X Moog Nr. D633-7330 Type A02KO4F0VXY

Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg

1998 Folding machine max size 46 cm x 66 cm 4 pockets + A56 DC delivery + T460-3-X folding unit + T460 mobile knife Located: Germany Available: immediately

PROFI PH 50-3H / 3-roll round bending machine If you want to bend profile or tube material, the Profi Bend is the best choice! With this profile bending machine, you can bend a wide variety of profiles into almost any desired radius. Made in Europe. Shaft diameter: 50 mm Roller diameter: 150 mm Shaft revolutions: 10 rpm Connected load: 400 V / 50 Hz Drive motor: 1.5 kW Feed distance: 120 mm Weight: 355 kg Dimensions: 1100x800x1400 mm Delivery & Payment

ALDURO Professional Knife WASU 50-230V for perfect results when sharpening your knives ! Backward Sanding Belt 50 x 1000 mm Peel-off felt disc Motor 0.6 kW, 230 V Speed 2850 rpm Belt speed 15 m/sec. Weight approx. 20.5 kg

used weigher Kemper Consul-ET, in bakery condition, checked and tested, works perfectly, No. 680454, 16 A, 400 V, 50 Hz

Danmatic Spray unit spray glazing machine 2017, stainless, spray glazing machine, belt dimensions 2150mm x 820mm, stainless mesh belt, four top mounted spray jets, adjustable pressure controls, can work with a great variety of liquids from pure water to oil and glaze egg, mobile, 3Ph

Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg

Whipped cream machine Whipped cream vending machine Mussana Tabletop unit with cooling Stainless steel for approx. 3-5 liters of raw cream with portioning device Processing max. 50 litres of cream/min Connection 220V, ready to plug in Used device cleaned 3 months warranty More pastry machines in stock!

LIDKÖPNG CL 4B Centerless Grinding Machine Specifications Working range workpiece diameter: 1 - 150 mm Longest workpiece length in the grooving process 300 mm Abrasives: Largest outer diameter 508 mm Smallest outer diameter 365 mm Normal width of the abrasive media 254 mm Largest abrasive media width 305 mm Control body: Largest outer diameter 330 mm Smallest outer diameter 255 mm Normal width of the control body 254 mm Largest regulating body width 305 mm Normal speed (infinitely adjustable) 0-115 rpm Power: Main motor, maximum 37 KW Total requirement approx. 42 kW Weight approx. 7 t Space requirement: approx. 4 x 4.2 m The machine can be viewed by appointment in our factory in Krefeld. – Errors, changes and prior sale excepted –

Temperature control unit Chocolate Dissolving Device with Container adjustable with temperature regulator 0 to 70°C Lid Water bath heating Tabletop appliance stainless steel version Connection 230V, 800 watts, ready to plug in Device dimensions approx.: 540 x 480 x 290 mm, WxDxH Used device cleaned and tested Many temperature control units in stock!

Cutting width: 430 mm Cutting speed: 24 m/min Maximum throughput height: 90 mm Blade gap: 0 - 5 mm Apply length on infeed conveyor: 400 mm Infeed conveyor: 850 x 425 mm Discharge conveyor: 650 x 425 mm Overall dimension W x H x D (with/without discharge conveyor): 800 x 1190 x 1660 / 1210 mm Weight (with/without discharge conveyor): 225 / 210 kg Motor performance: 0.75 kW Electrical connection: 3 AC - 400 V - 50 Hz, 16 A Compressed air: not required

The SE60 shrink tank is the perfect addition to your Multivac vacuum machine for shrink packaging of traditional products Max Product sizes (W x D x H): 600 x 400 x 180 mm Max weight: 25 kg Machine dimensions (W x D x H): 720 x 680 x 1250 mm Working height: 820 mm Machine weight: 115 kg

LIDKÖPNG CL 4B Centerless Grinding Machine Specifications Working range workpiece diameter: 1 - 150 mm Longest workpiece length in the grooving process 300 mm Abrasives: Largest outer diameter 508 mm Smallest outer diameter 365 mm Normal width of the abrasive media 254 mm Largest abrasive media width 305 mm Control body: Largest outer diameter 330 mm Smallest outer diameter 255 mm Normal width of the control body 254 mm Largest regulating body width 305 mm Normal speed (infinitely adjustable) 0-115 rpm Power: Main motor, maximum 37 KW Total requirement approx. 42 kW Weight approx. 7 t Space requirement: approx. 4 x 4.2 m The machine can be viewed by appointment in our factory in Krefeld. – Errors, changes and prior sale excepted –

Manufacturer: Hobart Type: Washing machine Model: UPT 10 Capacity: 130 liters Universal dishwasher: 120 sec 240 sec 280 sec Height: 2417 mm Width: 945 mm Length: 1435 mm Voltage: 400V 50Hz 3N Power: 24.5 kW 39.4 A Sertifikat: IP X4 Main material: Stainlees Steel

Inv. Num. : 7802 Type: G300 Producer: INDEX Created: 2003 Parameters: Control system: Siemens Maximum turning length: 710 mm Maximum turning diameter: 270 mm Number of axles: 9 pieces

Manufacturer: Multivac Type: Vacuum machine Model: C 400 Chamber depth: 470 mm Chamber height: 170 mm or 250 mm Sealbar configurations: front 650 mm + right 450 mm left 520 mm + right 520 mm left 520 mm + right 520 mm + front 520 mm front 700 mm Voltage: 3 x 400 V 50 Hz Incorporated vacuum pump: 100 or 140 m3/h Main material: Stainlees Steel Machine weight: 250 kg

Fully automatic stretch film packaging machine with weigher & labeler Packing Plant / Wrapper + Labeler DIGI AW-5600AT II The AW-5600 AT is an automatic weighing, packaging and labeling system with high performance for ease of use and environmental friendliness. The packaging machine reduces the workload with easy and simplified operation. It conserves film and label consumption through linerless labels in order to keep costs and environmental impact low. Goods such as cheese, meat or fruit and vegetables can be packaged easily and in a visually appealing way. Technical data Wrapper DIGI AW-5600AT II 220-240V / 50-60 Hz / 2.4 kW Suitable for Food-Tainer bowls Output up to 36 packets/min Package Size: Width: 130 to 380 mm/5.1-15 inches Height: 10 to 130 mm / 04.-5.1 inches Depth: 80 to 254 mm/3.1-10 inches The maximum packaging sizes also depend on t ...

Manufacturer: Webomatic Type: CD 110 Machine dimension L x B x H: 1140 x 900 x 1050 mm Two cutting-sealing bars: 500 mm Chamber dimensions L x B x H: 650 x 500 x 220 mm Possibility to work with gas Vacuum pump: 100 m3/h Machine cycle: 15 - 40 sec Voltage: 380 V, 50 Hz Power 2.2 kW

Reference Num.: 3344 Brand: Laconda Type: 620 Available: directly Status: In production Location: Deutschland Equipment: - 7 Stationen - Heft-, Falz-, Schneideaggregat Theisen Bonitz

Inv. Num. : 7790 Type: SL-4T Producer: MORI SEIKI Created: 1984 Parameters: Control system: FANUC 6T Maximum turning diameter over bed: 490 mm Maximum turning diameter over support: 320 mm Maximum spindle speed: 3000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 5500 kg Equipment: Conveyor

Inv. Num. : 7803 Type: EM 5 N II/L 2F Producer: ERNST Created: 2006 Parameters: Minimum length of the workpiece: 350 mm Maximum workpiece thickness: 70 mm Grinding width: 1380 mm Weight: 5100 kg

Spare parts for Battenfeld injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets

Spare parts for Demag injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets

Spare parts for Ferromatik injection molding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets

For sale is a used long belt sander (The machine is in the preliminary stage, photo is of a similar machine) Manufacturer: Kuhlmeyer Model: ZBS Year of Make: 2003 Working Area: 3,000x800mm Band size: 9,000x100mm Included: Grinding table height-adjustable, 5-axis workpiece handling device, swap shelf and a supply of belts If you have any further questions, please call or write to us!

Merkle Metzner Profile Automatic Cutting Machine Model XCL Material direction right to left Type of cut: Die cut/scissor cut Year 2002 Belt feed Width of belt 100mm Contact belt 200/400mm Poly-v belts Material acceptance: max. 100x30mm Drive Stepping motor, 3 phases Max. feed rate 40m/min Max. torque 420 Ncm Connection values Voltage 230V Pressure: 6 bar

For inserting eyelets into pre-perforated material such as cardboard, cardboard, plastic, etc. -Automatic eyelet machine with maintenance-free brake motor drive -Automatic eyelet feed to the upper tool -The eyelet pressure can be adjusted according to the thickness of the material -The trigger is done with a foot pedal. Machine is in good condition

Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von buerstlein Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen zirlguss Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwa ...

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 080V, new 2002. Operating side: right. Siemens S7 controls with Bosch/Rexroth/Indramat Servos. Capacity upto 80 cycles/minute. Originally used to pack 330/355 ml standard (D 66 x H 115/122 mm) beverage cans loose and pre-packed as either 6x3=18 or 6x4=24 on tray + film. Last used for 500 ml PET bottles (D 64 x H 204 mm) as 4x3=12 on tray + film.

Spiral mixer Diosna Model: SP 120 D kneading machine mobile with brake, 2 timers, 2 gears, Stainless Steel Boiler and Spiral Dough machine with return button Flour dust hood for max. 120 kg of dough, E-system NEW / DGUV V3 tested Dimensions: 800 x 1270 mm WxD Connection: 400 V, 6 kW, 16A, 32A-CEE plug Used machine overhauled with 3 months warranty + spare parts service Option: Maintenance contract Service Package E-Box We have a wide range of spiral mixers!

Baumkuchen Maschine BK 100 with ALU roller 1000 mm working width 900 mm roller width Immersion tub Swivel arm limiter Natural Gas Heating / 12000 Kcal/h Base with shelf 220V drive adjustable Dimensions: 1450 x 700 x 1500 mm, WxDxH Used device cleaned with 3 months warranty We have a wide range of bakery equipment!

4 Head Paper Drill Machine

Inv. Num. : 7816 Type: FGS 130 Producer: Droop Created: 1983 Parameters: Work table length: 4200 mm Work table width: 1200 mm Maximum workpiece weight: 10000 kg Spindle drive power: 22 kW X-axis travel: 3000 mm Y-axis travel: 650 mm Travel travel Z-axis: 350 mm Machine length: 7000 mm Machine width: 4000 mm Machine weight: 39500 kg

Flatpile Feeder, 4 Pockets, 1 Knive, Delivery

Inv. Num. : 7817 Type: RUR 2500 G Producer: PIERCE Created: 2014 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 120 mm Equipment: Rails Burning Machine Baths

Belt / roll width: 30 mm Mains voltage: 230V, 50Hz Paper from 70 g/m², film from 80μ (duplex film)

CNC Vertical Slot Milling Machine Year of Make: 1989 Workspace: x-axis 1300mm y-axis 150mm z-axis 200mm Tool holder: SK40 Spindle speed: 350 rpm – 4000 rpm Max. groove length: 1200 mm Max. groove width: 40 mm Clamping area: 1300 mm x 300 mm Weight: approx. 3500 kg Coolant Setup Dimensions: 1600 mm x 1500 mm x 1800mm (LxWxH) Hydraulic system Partially overhauled, milling spindle new. Commissioning within a radius of 200 km included in the price.

There are two cooling units from the manufacturer Viessmann for sale. One of the systems is equipped with a Bitzer compressor for freezing down to -18 and the other has a scroll compressor also for freezing up to -18. Year of construction 2017