We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,781 used machines on RESALE, but how to find them? Machine Search
used
x-travel:650 mm y-travel:600 mm z-travel:500 mm rotary table::280 PW 160 mm table load:300 kg spindle turning speed range:18.000 1/min drive capacity - spindle motor:15 / 10 kW control:SIEMENS 840D shopmill feed speeds infinitely variable:1 - 30.000 mm/min rapid traverse:45 m/min Tool changer:119 (32+87) Pos. spindle taper ISO:HSK A-63 weight of the machine ca.:9,5 t total power requirement:41 kVA 5-axis simultaneously universal-machining center, with NC-rotary-swivelling-table A-axis +-115° (25 1/min), C-axis 360° (40 1/min), internal coolant supply 80bar, 1.000 l, 2-pallet changer, pallet pool for 4 pallets, airblast through spindle, cabin roof manually, 3D touch probe RENISHAW, chipconveyor, el. compensation of thermal expansion SIN, 3D toolradius-correction SIN, A-axis eccentric 262,5, el. handwheel SIN, BLUM laser, flushgun, oilmist suction, wiper for spindle head, swarf-flushing ...
used
CONTROLS PLC PRESS DESIGN drive system: eccentric / crank number of slide actions: 12 PRESS FORCES total force (nominal): 36 to SLIDE slide force: 3 to stroke: 38 mm SLIDE (MECHAN. PRESS) variable speed: yes main drive power: 4 kW OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 50 mm feedstock transport direction: front-back STRIP-FEEDER feeder type: roll feeder sheet width max.: 50 mm pilot release system: no band lubrication system: optional TRANSFER SYSTEM number of tool stations: 13 distance between tools, stroke X fixed: 63.5 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right ...
used
CONTROLS PLC SCHNEIDER PRESS DESIGN drive system: eccentric / crank number of slide actions: 11 feedstock transport direction: left to right PRESS FORCES total force (nominal): 66 to SLIDE slide force: 6 to stroke: 114 mm SLIDE (MECHAN. PRESS) variable speed: yes stroke rate (min.): 40 /min stroke rate (max.): 130 /min main drive power: 7.5 kW STRIP-FEEDER feeder type: roll feeder TRANSFER SYSTEM distance between tools, stroke X fixed: 82 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 2875 mm space requirements -front/back-: 1500 mm total height: 2900 mm total weight approx.: 7500 kg ATTACHMENTS (PRESSES) safety guard / safety door: yes 2-hand engage ...
used
CONTROLS PLC PRESS DESIGN drive system: eccentric / crank frame design: C-frame, single sided number of suspensions: 1 PRESS FORCES total force (nominal): 200 to PRESS TABLE table surface (left-right): 1400 mm table surface (front-back): 800 mm SLIDE table surface (left-right): 1000 mm table surface (front-back): 600 mm SLIDE (MECHAN. PRESS) slide adjustment: 120 mm autom. Slide adjustment: yes stroke min.: 20 mm stroke max.: 200 mm stroke rate (max.): 45 /min hydraulic overload protection: yes DIE CUSHION (TABLE CUSHION) number of cushions: 1 TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 510 mm ELECTRICAL SPECIFICATIONS mains voltage: 380 V DIME ...
used
PRESS DESIGN drive system: eccentric / crank number of slide actions: 10 SLIDE stroke rate (max.): 110 /min 10 stations + 1 auxiliary 5 ton per station Distance between stations: 54 mm (2-1/8") STROKE OF CAMS (STANDARD) #1 25-35 mm (1- 1-3/8") #2 to #10 25-41 mm, (1 - 1-5/8") Speed: 110 SPM
used
PRESS DESIGN drive system: eccentric / crank number of slide actions: 6
used
PRESS DESIGN drive system: eccentric / crank openings in uprights: yes number of suspensions: 1 number of slide actions: 1 table cushion: no PRESS FORCES total force (nominal): 125 to PRESS TABLE table surface (left-right): 1100 mm table surface (front-back): 630 mm SLIDE table surface (left-right): 700 mm table surface (front-back): 400 mm stroke: 150 mm stroke rate (max.): 70 /min SLIDE (MECHAN. PRESS) slide adjustment: 90 mm stroke adjustment: yes stroke min.: 15 mm stroke max.: 150 mm stroke rate (min.): 20 /min stroke rate (max.): 70 /min main drive power: 15 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 400 mm ELEC ...
used
PRESS DESIGN drive system: eccentric / crank number of slide actions: 6 table cushion: yes 6 stations plus auxiliary station Used for eyelet production - tooling still mounted
used
PRESS DESIGN drive system: eccentric / crank openings in uprights: yes feedstock transport direction: right to left PRESS FORCES total force (nominal): 315 to nominal work capacity: 45 kNm PRESS TABLE table surface (left-right): 2250 mm table surface (front-back): 1100 mm thickness of bolster plate: 150 mm height above floor level: 1000 mm SLIDE slide force: 315 to table surface (left-right): 2250 mm table surface (front-back): 880 mm stroke: 210 mm stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke rate (min.): 25 /min stroke rate (max.): 80 /min main drive power: 60 kW SLIDE EJECTOR / CUSHION working principle: pneumatical & ...
used
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 30 to PRESS TABLE table surface (left-right): 480 mm table surface (front-back): 428 mm SLIDE (MECHAN. PRESS) slide adjustment: 40 mm stroke adjustment: yes stroke min.: 8 mm stroke max.: 40 mm variable speed: yes stroke rate (min.): 100 /min stroke rate (max.): 600 /min TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 220 mm STRIP-FEEDER feeder type: roll feeder feeding step min.: 20 mm feeding step max.: 100 mm ELECTRICAL SPECIFICATIONS total power consumption: 4.5 kW mains voltage: 380 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/ri ...
used
CONTROLS PLC SIEMENS S5 PRESS DESIGN drive system: eccentric / crank frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 number of slide actions: 1 table cushion: yes quick die change system: yes feedstock transport direction: left to right PRESS FORCES total force (nominal): 400 to nominal work capacity: 32 kNm PRESS TABLE table surface (left-right): 2600 mm table surface (front-back): 990 mm thickness of bolster plate: 200 mm height above floor level: 800 mm opening in bed (left-right): 2250 mm opening in bed (front-back): 280 mm SLIDE slide force: 400 to table surface (left-right): 2600 mm table surface (front-bac ...
used
PRESS DESIGN drive system: eccentric / crank frame design: H-frame, tie rod openings in uprights: yes table cushion: yes feedstock transport direction: left to right PRESS FORCES total force (nominal): 200 to PRESS TABLE table surface (left-right): 1780 mm table surface (front-back): 1300 mm opening in bed (left-right): 1445 mm opening in bed (front-back): 260 mm SLIDE slide force: 200 to table surface (left-right): 1500 mm table surface (front-back): 1100 mm stroke: 178 mm stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) slide adjustment: 150 mm stroke rate (min.): 20 /min stroke rate (max.): 120 /min DIE CUSHION (TABLE CUSHION) number of cushions: 11 & ...
used
CONTROLS PLC PRESS DESIGN drive system: eccentric / crank openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to PRESS TABLE table surface (left-right): 2480 mm table surface (front-back): 800 mm SLIDE table surface (left-right): 2200 mm table surface (front-back): 800 mm stroke: 300 mm stroke rate (max.): 90 /min SLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke adjustment: yes stroke min.: 40 mm stroke max.: 300 mm stroke rate (min.): 23 /min stroke rate (max.): 90 /min main drive power: 45 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), B ...
used
Planetary mixer RWH 200 - Mixing system mixer mixer stirrer as good as new condition with PLC control and monitor visualization Manufacturer: Mischmischmischtechnik Hoffmann & Partner Type: RWH 200/VA/VA/FU N°: 6150 ; Y.O.M.: 2008 State. As good as new Siemens PLC Visualisation Filling nozzle slated with pneumatically spun rotary flaps Filling snail Frequez controlled motors Level sensors hydraulic excavation Attachment (batch) size: max. 200 liters with Siemens Symatic Multi Panel Touch / Control / Frequency Inverter with 1x cleaning container and 1x mixing container double-walled for cooling/heating (approx. H-640 mm (without rollers); 650/720 mm) The planetary mixer RWH200 is a mixing system in which eccentrically running mixing tools rotate once around their own axis and additionally around the container axis in the vertically arranged mixing container (exchange c ...
used
equipped with: 5 slide units 1 Eccentricpress 70 kN working range: wire diameter range: max. 3,0 mm strip metal width: max. 40 mm feeding length: max. 170 mm output: max. 250/min; ready for operation
used
Non-contact position measuring system Manufacturer: Dornier Type: I-W-A Anwendungsgebite are: Axial and radial shaft vibration measurements Monitoring of measuring tolerances Determination of deformation and displacement Measurement of wave and eccentricities Roundness measurement Valve position measurement Thickness measurement Accessories: various transducer and mounting plates Evaluation electronics Connection cable Operating instructions Calibration curves Condition: used More info: see also photos All information without guarantee
used
table load: 150 kg weight of the machine ca.: 250 kg dimensions of the machine ca.: 800 x 700 x 950 mm Exhibit Machine Producer: BENDMAK Type: SRP 015 Load capacity: 150 kg Load center: 100 mm Eccentricity: 100 mm Rotation of the turntable: 360° Strongest inclination: 90° Input Power: 380 V Rotary motor: 0,18 kW tilt motor: 0,25 kW Speed: 1,4 m/min Slew: 30 sek. Table-Ø: 500 mm T-Slots: 5-72 Height in horizontal rotation: 700 mm Dimensions: Height: 950 mm Length: 800 mm Width: 700 mm Weight: ca. 250 kg Earthing: 300 Amp. Additional information: - adjustable speeds - control panel with 5 m cable - digital speed indicator on the control panel for monitoring the rotation - weld grounding mechanism - mechanical angle indicator - engine brake with air cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Vertical divider, Breast table, FAGOR display, Grinding heads, Gauges and brackets / Vertical Divider, Table breasts, FAGOR display, grinding heads, gauges and brackets, High: 2500 mm, Long: 2000 mm, Width: 1651 mm, Weight: 1815 Kg., Dimensions: 279.4 x 609.6 mm, Screw speed: From 40 to 250 r.p.m., Do not manufacture: G 191, Transversal career: 279,4 mm, Distance chuck table: min 25,4 / max 457 mm, Longitudinal highway: 457 mm, Spindle eccentricity: min 3 / max 76 mm, Distance spindle to column: 254 mm
used
Roundness tester make MITUTOYO type Roundtest RA 122Code no. 211-941D, serial no. 920069 built in 1992consisting of:MEASURING UNIT RA 1001 control and evaluation unit RE 12 buttons No. 211-046Technical specifications:Turntable: air-bearingMeasuring range / workpiece diameter: 280 mmMeasuring range / workpiece height outside: 220 mmMeasuring range / workpiece height inside: 110 mmRoundness of the turntable: 0.08 + 6 H / 10000 µmSpeed: 6 rpm.Table diameter: 110 mmCentering range: +/- 2 °Leveling range: +/- 1 °Weight: 32 kgDimensions L x W x H: 252 x 404 x 545 mmBUTTONMeasuring range: +/- 0.25 mmStylus radius: 1 mmMeasuring force: 70-100 mNCONTROL AND EVALUATION UNITFilter: 15, 50, 150, 500 oscillations / revMeasuring range max .: +/- 250 µmMagnification: 100 x - 20000 xautomatic compensation: eccentricity, coaxialityParameters: roundness, center offset: Top height, valley depths, evenn ...
used
Center height: 300 mm Turning diameter: 600 mm Distance between centers: 2100 mm Eccentricity: max 140 mm Self centering chuck diameter: 200 mm Work piece weight: max 250 kg Grinding diameter: 224 mm Work piece turning speed: 18/40/63/90 rpm Grinding wheel dimeter: 915 mm Grinding wheel thickness: 32-63 mm Grinding motor: 7,5 hp Size: 5000 x 2100 x 1700 mm Weight: 4900 kg Includes 3 wheel hubs and 4 used grinding wheels
used
Milling machine for connecting drawers OMEC 750 The machine is designed to make connections min. drawers, boxes The operator sets two components at the same time, then the machine Automatically mills along the entire length Spindle on eccentricity Milling motor power 1.1 kW Spindle speed 18000 RPM Two speeds of 25 and 35 n/-1 Machining parameters: Front thickness: min/max: 7/60 mm Sidewall thickness: min/max: 10/30 mm Key height: min/max: 6/18 mm Machine dimensions: 1300x700x1200h mm Machine weight: 400 kg
used
Upgrade with original GFM CNC in 2006 General upgrade by GFM in 2011 (worked only 9352 Hours, after) also the oscillation brake has been replaced by a hydraulically operated oscillation system Force of each hammer 200 tons Total Forge Tonnage 800 tons Strokes/min 580 Max Forging bar diameter 160 mm Max Squares with 140 mm Hammer length 326 mm Diameter of adjustment range 100 mm Forge eccentricity 6 mm Feed of Manipulator A 4.800 mm Feed of Manipulator B 5.200 mm Workpice length at lateral unloading 4.000 mm Manipulator spindle I.D. 111 mm Total installed power 450 kW Machine weight 117 tons
used
Klingelnberg S-35 10-Axis CNC Gear Cutting Machine 10-AXIS CNC CONTROL SUITED FOR MEDIUM & LARGE SPIRAL BEVEL & HYPOID GEARS 23.6" MAXIMUM WORKPIECE DIAMETER DESIGNED HIGH DEPENDABILITY & PRECISION CONTINUOUS & SINGLE INDEXING OPERATIONS SPECIFICATIONS: MAXIMUM WORKPIECE DIAMETER 23.6" (600mm) SMALLEST NORMAL MODULE 0.137" LARGEST NORMAL MODULE 0.393" MAX TOOTH WIDTH 3.93" SMALLEST TRANSMISSION RATIO 1:1 LARGEST TRANSMISSION RATIO 1:10 SPIRAL ANGLE (DEGREES) 0-60 CUTTER HEAD SPINDLE: OERLIKON SHORT TAPER 1:4 0-5.118" SPINDLE SPEEDS (INF. VAR.) 30-350 MIN-1 SPINDLE TILT (DEGREES) 0-35 ECCENTRICITY 0-10.82" CUTTER HEAD RADIUS 3.46"-7.12" WORKPIECE SPINDLE OERLIKON OUTSIDE TAPER 1:4 0-8.85" INSIDE TAPER NO. 39, 1:19,692 6" MAX SPINDLE SPEED 0-160 MIN-1 BORE 0-6.29" AXIAL OFFSET +/-2.36" SWIVEL RANGE (DEGREES) -7 UP TO 90 FEEDS: GENERATING FEED ( ...
used
Code: 0200 Brand: PAMMINGER - AUSTRIA Model: T-AGGREGAT High-performance automatic vertical strapping machine for strapping pallets, panels, composite materials, various materials, etc - Year 2018 - CE Standard Max workable width 2100 mm Max workable length 5600 mm Max workable height 600 mm The upper arrangement of the strapping aggregate and therefore resulting flexibility in width and height of both the machine and the packing piece which has to be processed ensures variable operation of the machine 2 column machine frame made of bent and welded sheet metal Clearance adjustable support rollers ensure a smooth running of the support along the machine columns The movement of the lifting unit including the sealing unit and the strap guiding frame is utilized with an endless toothed belt and an electric gear motor with brake Vertical slide and aggregate support for the s ...
new
number: 100 Positionen : 28 mm condition: neu weight: 280 kg dimensions: 1,2 x 0,5 x 1,3 m XXL starter package, consisting of: - 15x – standard clamping pliers - 5x – multi-clamp pliers - 10x – side tensioners with eccentrics - 15x – Loose cam H30 - 10x – Loose cam H100 - 2x – pipe insertion cam series - 10x – quick release bolts - 10x – stop block 15mm - 4x – Right Angle XL - 6x – Right angle - 6x – angle of attack - 1x – box - 1x – Insert holder - 1x – Allen key - Tool trolley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Second-hand wide belt sanding machine Make Heesemann Type MFA Impression not rebuilt - without guarantee Year of construction 2010 Technical specifications: Sanding width 1,350 mm - cross sanding unit with pressure lamellar belt system - combined longitudinal sanding unit with calibration roll - longitudinal sanding unit - structuring brushing unit - dust removal brushing unit - 3 pressure beams with computer-controlled selective pressure control system CSD Distance of the control rollers 21 mm Feed speed: 3 - 15 m/min. Working height constant 880 mm motorized adjustment to the workpiece thickness 3 - 150 mm 1 pressure roller Ø 50 mm swinging, in the infeed of the machine including workpiece oversize control Roller table in the infeed of the machine 1 industrial PC 10.4 with program memory for 100 programs 1 cross sanding unit Abrasive belt ...