e h used for sale

The machine is in good technical condition, inspection and trial operation is possible by prior arrangement

Planetary roller extruder, used Type : PWE 120 Manufacturer : Entex

Able Engineering 500L Tank Chocolate Tank 2015, Stainless, 500L capacity, jacketed mixing tank, Top mounted agitator, central bottom discharge into jacketed Rotan Pump all mounted on skid with load cells, 3Ph

GUILLOTINE REEL-SLITTER, for paper and plastic reels, complete with back hydraulic ram, ram running length: 244 cm + 135 cm piston (space taken from the ram piston), working width 1.160 mm, working height 950 mm, n.2 pistons, hydraulic pack 580 Bar, cutting force : 45 Ton, installed power 15 kw, the machine is offered reconditioned with sworn appraisal, compliant to CE safety rules, availability: 4 weeks, conditions: reconditioned, installed power - used power in work: about 60-65% : 15, working width: 1.160 mm.

A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible.

Safety Relay Elan SRB-NA-ST99-24VDC STAMA MC 325/S Manufacturer: Elan Type: SRB-NA-ST99-24VDC Condition: used Dimensions: 90×85×125 mm Weight: 0.57 kg Origin: STAMA MC 325/S Price: (plus VAT)

Safety Relay Elan SRB-NA-ST99-24V STAMA MC325/S Manufacturer: Elan Type: SRB-NA-ST99-24V Condition: used Dimensions: 90×85×125mm Weight: 0.57kg Removed from: STAMA MC325/S Price: (plus VAT)

Key data: 550 V

Gas Generation Unit with MAN E3262 LE202 Engine. Compatible with both natural gas and biogas. SCOPE OF SUPPLY •⁠ ⁠Engine •⁠ ⁠Alternator •⁠ ⁠Control panel Motortech All-in-One Vision 5 •⁠ ⁠Gas Ramp Technical documentation: Manufacturer's MAN datasheet, MAN Operating Instruction Manual. The engine has undergone borescope inspection, revealing all internal elements in well-preserved condition. Engine turns freely. The turbos have recently been overhauled. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

"The machine from 1992 is still in productive use and will be available from week 35." More details please on request!

Vibrating screen with 3 levels motor 4 kW Very good condition, Immediately available!

Grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 355 mm, Ø min/max to be rectified: 1.5 / 125 mm, Regulating wheel width: 355 mm, No. of regulating wheel speeds: infinite, Dressing speed: 225 min1, Dive (auto/manual): 254 mm, Regulating wheel dimensions (od x id x width): Ø355 x Ø203.2 x 254 mm, Maximum length to be rectified in plongeé: 254 mm, Grinding wheel head motor power: 30 kW, Power motor head regulating wheel: 3 Kw, Hydraulic motor power: 0,37 kW, Long: 5.175 mm, Width: 2.950 mm, Tall: 2.120 mm, Weight: 8.375 kg

Axes: 5, travel X/Y/Z: 400mm/400mm/375mm, spindle speed: 18000rpm, power: 35kW, tool holder: HSK-A63, tool positions: 60, rapid traverse: 30m/min, table dimensions X/Y: 480mm/480mm, max. workpiece weight: 250kg, machine weight: approx. 8150kg, operating hours: approx. 50950h, spindle hours: approx. 20200h. The lifting and swivel unit of the pallet changer are defective. Documentation available. An on-site inspection is possible.

An ELB cycle-controlled surface grinding machine is available. Grinding length: 600mm, grinding width: 375mm, max. workpiece height: 375mm, magnetic clamping plate dimensions X/Y: 1000mm/375mm, table travel: 525mm, table speed: 30m/min, max. table load: 300kg. Machine dimensions X/Y/Z: approx. 2550mm/2050mm/2500mm, weight: approx. 4000kg. Including a coolant unit. st möglich.

Casing-In-Machine

3-axis machining centre with automatic tool change for aluminium or PVC profiles Max. travel X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control Windows 10 with new computer in 2023 Speed infinitely variable up to 24,000 rpm Hand-held control unit Minimum quantity spraying Tool changer with 2 magazines (a total of 10 places plus angle head) Tensioner detection and clamp displacement 2 pneumatically folding material stops and 2 light barrier areas, thus pendulum operation possible A total of 8 material tensioners Spindle in very good condition, spindle pull-in force: 12.5 kN Protective fence dismantled, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 9,000 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system Minimum quantity spraying Tensioner detection and automatic displacement Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg

Laminiermaschine / Laminator GMP Eurolam IDH 540III Year 2015 - Serial-No. CJ00340K Bogengröße / Paper Size max. 540x740mm Arbeitsgeschwindigkeit / Laminating Speed max. 30m/min Papierstärke / Substrate Thickness 120-350g/? Front Roller Diameter T: 163mm / B: 150mm Rear Roller Diameter Laminating Temperture max. 150? Power Consumption 12kW Die Maschine verfügt über eine Induktionsheizung, pneumatischen Zylinder-Andruck und eine professionelle PID-Temperaturkontrolle.

Casing-In / Bucheinhängemaschine Kolbus EMP

Schraubenkompressor / Screw Compressor ECOAIR D 50 Baujahr / Year 1991 - Serial-No. 27020521 Verdichtungsdruck / Compression Pressure 10 bar Drehzahl / Rotation Speed 2950 u/min Volumenstrom / Volume flow 5,0m2/min Leistungsbedarf des Verdichters / Power requirement of the compressor 37 kW Abmessungen / Dimensions 200 x 80 x 150 cm Gewicht / Weight 730 kg

Steaker / Meat Cutter / Strip Cutter Manufacturer: EDERTAL / Type: FM 35 Specifications: 400 V / 50 Hz / 1.05 A Year of Make: 2017 Weight: 32 kg including 3 mm strip cutter insert Function checked, machine ready for use Stock machine, immediately available! Condition, see original pictures!

Engel victory 200/50 spex (2010) CC200 Clamping force: 50 t Screw diameter: 35 mm Type: Horizontal Drive: Hydraulic Hours: 56000

Separates polymers, colors (including black). Partially shoots aluminum (sees by color). The sorting machine additionally includes: a platform, a chiller ~3.5kW (for cooling), a flake feeding system (by fan), suction of good flakes and feeding into a packing cyclone + cyclone/bunker + big bag frame with pneumatic cylinders, suction of bad flakes into a cyclone (separate from good ones). We sorted 1-1.3 tons/hour of sufficiently quality PET flakes.

Key data: 318 mm, 648 mm

JONES & SHIPMAN SUPREMA EASY 650 UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER (2010) Table: Swing:... 12.5" Distance Between Centers: 25.5" Table Travel 29.5" Max. Traverse Speed . 472" IPM HPG Increments .. 0.00005", 0.0005", or 0.005" Table Swivel 18 Deg. CCW, 16 Deg. CW Wheelhead: Total Infeed Travel:. 10.236"" Max. Speed .. 236" IPM Minimum Programmable Increment .. 0.00005" HPG Increments .. 0.00005", 0.0005", or 0.005" Swivel Range 190 Degrees CW 45 Deg. CCW External Grinding Wheels: Grinding Wheel Size, L.H. Standard:.. 14" x 2"W x 5"B R.H Standard: .. 12" x 1"W x 5"B Spindle Speeds (3):.. 1773, 2069 & 2400 RPM Motor Power: 5.5 H.P. Headstock: Swivel:.. 15 Degrees CW 90 Deg. CCW Speed, Infinitely Variable:.. 30 to 450 RPM Centers, Standard/Reduced ... #5 MT/#3 MT Approximate Weight: . 11,000 Lbs. Equipped With Internal grinding wheel attachm ...

We are offering a fully equipped machine workshop for sale, which includes the following equipment: 1. Machinery - MIKRON VCE 800 Pro Machining Center - LAGUN FCM 152 Milling Machine - CMZ TBI-450 CNC Lathe - PINACHO A 70 Conventional Lathe - PUSKAS PKM 10-S-500 Compressor - PUSKAS PLX-9 Dryer - SUPERLEMA Ø200 Grinder - CDM 210 Horizontal Bandsaw 2. Tools - HSS Drill Bits Ø1 to Ø35 - MD Drill Bits Ø1.5 to Ø20 - HSS Reamers Ø3 to Ø25 - Coated HSS Milling Cutters Ø2.5 to Ø25 - MD Milling Cutters Ø1 to Ø20 - D’ANDREA Boring Heads – Precision 0.002 mm (2 units) - Planer and Squaring Chucks Ø12 to Ø80 - Tool Holders for CNC & Conventional Lathes - Milling and Turning Inserts - Metric & Whitworth Thread Taps and Dies 3. Clamping Systems - ARNOLD MB 125 Vises – Precision-Ground (2 units) - ISO 40 Taper Collet Holders (DIN 69871) - ISO 40 Chuck Holders - Weldon System IS ...

Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Concre ...

Key data: 2000 mm, 750 mm, 800 mm

Spindle ISO 40 Workpiece weight 2200kg RPM 50 - 15000 kW 46 Volts 400 Cycles 50 Dividing head 250 mm (6th Axis) ATC 40 positions Built in rotary table 800 mm Chip Conveyor

PROGRESS MESH WELDING M-System Evolution Model 2012 M25576 • MMR – Straightening Machine Model 2012 • SWR – 6 Welding Heads Model 2012 Max mesh size: 3.5 m width and 9.0 m length Cross & length wires diameter: 6, 8, 10, 12, 16mm Mesh characteristics: Width: up to 3,500mm, Length: up to 9,000mm Min. Width: 500mm, Min. Length: 1,000mm Max. Bar Length: 9,000mm, Min. Bar Length: 500mm Bar Length Tolerance: +-5mm, Bar Placing Accuracy: +- 10mm Crosswire Diameter: 6, 8, 10, 12 and 16mm Line Wire Diameter: 6, 8, 10, 12 and 16mm Bar on Bar Welding: 12mm on 12mm Placement Angle of Bars: 0° or 90° Minimum Flying End Length: 25mm A Bar must have at least two welding nodes Only one Bar per receiver is permissible Standard centres: Cross Wires: Infinetely variable (minimum 35mm) Line Wires: Multiple of 25mm Minimum Centres: Cross Wires: 25mm Line Wires: 25mm  ...

B&A REF: 9164 TON: 80 SCREW DIAMETER: 40MM SHOT WEIGHT: 208 STROKE VOLUME: 231CM3 INJECTION PRESSURE: 2025AR PLATEN SIZES: 590 X 580MM DBTB: 400 X 400MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 250MM EJECTOR STROKE: 150MM CONTROLS: NC4 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 11KW SCREW DRIVE: HYDRAULIC

Manufacturer: Central Mine Equipment Model: 75 Year of Manufacture: 1972 Type of Machine : drill for geotechnics Km Count : 165208 kilometers Find more here - / Contact us at -

Key data: 2500 , 60

ENGEL 250T injection molding machine Reference : ES1800/250HL Clamping force : 250T Year : 1999 Working hours : 73 655 h Screw diameter : 60 mm Injectable volume : 763 cm3 Injection pressure : 1969 bars Platen dimensions : 1150 x 900 mm Mold thickness (min/max) : 350 mm x 850 mm Dimensions : 6,92 m x 2,08 m x 2,14 m + with 1 SEPRO robot

x-travel: 450 mm y-travel: 300 mm z-travel: 350 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Electric Forklifts, Forklifts, Electric Forklifts Manufacturer: MITSUBISHI Type: FB35N EDIA 35 Year of manufacture: 2018 Operating hours read: Nominal load capacity max 3500 kg Lifting height: approx. 4500 mm Empty weight without battery: 4029 kg With sideshift Drive: Electric 16 kW with charger D80/100 Wa Dimensions: approx. 4200 x 1200 x 3000 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

RÖSLER R320 Euro rotary vibrator YOM 2017 Outer diameter max. 1350 mm Width of processing channel 325 mm Overall length of processing channel 3050 mm Machine height - upper edge of processing bowl 1210 mm Work piece discharge heigh 1150 mm Height of media unload plug 615 mm Connected load 3 kW Weight 920 kg

Watercooled chiller Trane ECGWN207BA2D11DC 251.7 kW Cooling capacity: 251.7 kW / 71.57 tons (12/7 — 35°C) Year of manufacture: 2010 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Danfoss CSHN250K0AK0 (scroll) Type of refrigerant: R410a Dimensions: 2.54x0.88x1.84 m. Weight: 1420 kg. Working hours: 34500/34500/34500/34500 h. Condition: Good

Skinner Maja -Type: ESB 3450 -Power: 0.75 kW -Dimensions: 1780 x 740 x 1240 mm -Weight: 195 kg -Feeder belt width: 385 mm -Power supply: 400V 50Hz 3N -Made of stainless steel -Quantity in stock: 1 -Condition: used in good condition/overhauled/ready to work

Manufacturer: Star Model: ECAS-32T Year of Manufacture: 2005 Frequency: 50/60 Hz Power: 8.0 KVA The machine comes with an automatic bar feeder and oil mist filter. Automatic Bar Feeder: Manufacturer: FMB Model: TURBO 3-36/3200/A Year of Manufacture: 2006 Find more here - / Contact us at -

Ice cream machine from carpigani, in working order.

Manufacturer: Star Model: ECAS-32T Year of Manufacture: 2007 Voltage: AC 200V (3 Phase) Frequency: 50/60 Hz Power: 8.0 KVA Weight: 5700 Kg The machine comes with an automatic bar feeder and oil mist filter. Automatic Bar Feeder: Manufacturer: FMB Model: TURBO 3-26/3200/A Year of Manufacture: 2008 Find more here - / Contact us at -

2000 litre process vessel Manufacturer: TSA Process Equipment WFI Containers NEW in original packaging Year of construction 2020 electro-polished Double-jacket, pressure-resistant Operating temperature product room 130 °C Operating temperature sheath 170 °C Accessories

Transformer Description Manufacturer: Gonella Costruzioni Elettromeccaniche Location: United Kingdom Type: Three-Phase Transformer Power: 1600 kVA Frequency: 50 Hz Year: 1983 High Voltage : 10,000-20,000 ±5%, 92.38 A, 46.19 kV Low Voltage : 400-233.3 V, 2309.99 A

Measuring range X/Y/Z: 700mm/700mm/500mm, probe ball diameter: 7.9942mm, control: Zeiss C90, touch probe: PH6/TP6, max. measuring deviation: 3.6+L/250µm, max. angle error: 0.22°, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

3 phase ONAN Transformer 20000V/400V Dyn 11, 50Hz From general service, new oil, Sale without guarantee, as is, where is

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

Chiller - Euro Cold 09-CF-02960 / New, unused Year of Make: 2014 Location: Lodz, Poland Description: Cooling capacity approx. 45 kW Refrigerant R407C The device has: - 1 compressor - Separate container for medium - Barrel pump -Radiator - Fan x 2 The device has an additional heating function and can be used to control the temperature of tools The device after maintenance, fully functional 3-month operating warranties in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

Cooling unit (chiller) - Euroklimat RKO. E-B/ST/AS 201S / Perfect technical condition Year of Make: 2019 Location: Lodz, Poland Description: Cooling capacity approx. 60 kW Refrigerant R290 The device has: -Compressor - Separate container for medium, approx. 200l -Circulating pump -Heat exchanger -Radiator - Fan x 2 Depending on the load, the fans can work at different speeds The device is suitable for outdoor work The unit can work as a heat pump and has heating and cooling functions The device after maintenance, fully functional 3-month operation warranty in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

REINHARDT automatic optimizing cross cut line, type Economy Line NC 810 H

Packaging machine Paal / Bosch ELE 2ALS 1995 (Retrofit 2015) Retrofit (modernization): 2015 Availability: from August 2025 Condition: fully functional Connected loads: 400 V, 3 Ph, 50 Hz

Injection molding machine ENGEL VC330 -110T Reference: VC 330 /110 Clamping force: 110 T Year: 2005 Number of working hours: 32,659 h Screw diameter: 30 mm L/D: 23.6 Maximum injectable volume: 113 cm3 Injection pressure: 2180 bar Overall platen dimensions : 740 x 470 mm Mold thickness: mini: 300 mm Weight: 7300 kg Dimensions: 4.36m x 1.48m x 2.04m + with 1 Sepro Robot and 1 conveyor belt

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003