e bickel used for sale

Extraction system, central extraction, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust air connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - pocket filter- Maintenance flap for filter change - Centrifugal fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg very good condition; used

Stick electrodes 2.2 x 350 -Elga: Cromarod 308L for V2A/V4A -Dimension: Ø 68 x 355 mm -Weight: 3 kg

Stack electrode 4.0 x 450 -Type: 35056 -Weight per package: 5.6 kg

Stack electrode 5.0 x 450 -Type: OK 48.00 -Weight per package: 6.3 kg

Stick electrodes 4.0 x 450 -Type: OK 48.00 -Price: per package -Number: 2 packages available -Weight per package: 6.2 kg

Stack electrode 4.0 x 350 -Type: OK50.40 -Weight per package: 4.4 kg

Stick electrodes 3.2 x 350 -Type: CP 35078 D -Price: per package -Number: 3 packages available -Weight per package: 4.6 kg

Stick electrodes 3.2 x 350 -Type: Navalend 81 -Price: per package -Number: 2 packages available -Weight per package: 5 kg

Stick electrodes 3.2 x 350 -Type: Navalend 25 -Price: per package -Number: 2 packages available -Weight per package: 5.3 kg

Stick electrodes 3.2 x 350 -Type: OK 63.31 -Weight: package 3.1 kg/79 pieces -Package: not full

Stack electrode 4.0 x 450 -Type: OK Selectrode 83.28 -Weight per package: 5.8 kg

Stick electrodes 3.2 x 350 -Type: OK 63.31 -Price: per package -Number: 4 packages available -Weight per package: 1.8 kg

Stick electrodes 4.0 x 350 -Type: OK 63.30 -Price: per package -Number: 2 packages available -Weight per package: 4.6 kg

Stick electrodes 3.2 x 350 -Type: P84CR -Price: per package -Number: 1 packages available -Weight per package: 2.3 kg

Stick electrodes 2.5 x 300 -Type: P81CR -Price: per package -Number: 2 packages available -Weight per package: 1.8 kg

Stick electrodes 3.2 x 350 -Type: P83CR -Price: per package -Number: 1 packages available -Weight per package: 2 kg

Stick electrodes 2.5 x 300 -Type: P83CR -Price: per package -Number: 7 packages available -Weight per package: 1.6 kg

Stick electrodes 4.0 x 350 -Type: P81CR -Price: per package -Number: 5 packages available -Weight per package: 4.5 kg

Stick electrodes 2.5 x 350 -Type: P 48S -Price: per package -Number: 9 packages available -Weight per package: 4.5 kg

Stick electrodes 3.25 x 350 -Type: CP 33033 -Analysis: 0.1C-18Cr-8Ni-6Mn remainder Fe. -Price: per package -Number: 4 packages available -Weight per package: 5.2 kg

We offer general-overhaulted exchange engines with 12-month guarantee Engines incl.starter+altenator, with test bench run ex works immediately available. We are to authorised AGCO Sisu power Service-Parter in the north Germany MIW GmbH Nord-West-Ring 8 D-27404 Zeven-Germany Tel: 0049 (0) 4281-950583 Fax: 0049 (0) 4281 950585 e mail: info@miw-zeven.de abc.miw-zeven.de

Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg

Esterer DKV 1 movable shaft ! feed hydraulically hydraulic and electrically roller lift: hydraulic power: 55 kW Year construction year: approx. 1982 passage: 750mm = width, 160mm = height 2 x directional laser incl. approx. 15 Circularsaws including with Splitter unit screw roll; good

Te Koop: Endress & Hauser flowmeter DN 25 Pro level 63F

Te Koop: Endress & Hauser Druktransmitter. Cerabar type: PMC 531-D40D2A6A25

Te Koop: Endress & Hauser silo meter. FMC type met 470 Z Monorack 11

Edwards pump station consisting of: Rotary vane vacuum pumps: Edwards E1M175 Booster pump Rootspumpe: Edwards EH1200 Condition: used General overhaul of the devices is possible with a warranty of 12 months. Delivery time: In stock; ready for operation

Die sinking machine Fabr. AEG-Elotherm type Elbomat 222 WMash. -No: 224.4009with generator EP 60 C 2145172 and filter F 11 VYear of construction 1980Adjustment X: 300 mmAdjustment Y: 200 mmReading accuracy: 0.01 mmTable load max .: 400 kgTable dimensions: 580 x 310 mmTank / processing room: 700 x 450 x 265 mmMax. Fluid level above workpiece carrier: 250 mmTank volume: 70 lWorking head angle: 200 mmHead support: 200 kpMax. Distance between working head and table: 480 mmDepth gauge: 50 mmDepth-of-cut accuracy: + - 0.02 mmExternal dimensions of the machine: 1250 x 1225 x 2150 mmWeight approx.: 1.3 tWith- mot. Coarse adjustment of the working head / W axis- Eloplus Generaotr type EP 60 C- Heidenhain positioning controller TNC 1213 R Orbicut midi tromes- Adapter slot- H 400 system- Filter F 11Vused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.P ...

Shock freezing evaporator EKO with 3 fans, type ESL 63.33.12Y, lamellar distance 12mm, defrost heater, fan diameter 630mm,

Blast Freezer, shock freezer EKO with 4 fans, type ESL 63.42.12D, lamellar distance 12mm, defrost heater, fan diameter 630mm

Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 460 x 410 mm - Screw diameter: 25 mm - Shot weight max: 54 g - Injection rate: 108 cm?/s - Injection pressure: 2.400 bar - Injection volume: 59 cm? - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 225 / 28 mm / kN - Clamping force: 1.000 kN - Mould opening stroke max: 350 mm - Mould height max: 450 mm - Mould height min: 150 mm - Daylight between platens max: 800 mm - Platen size (h x v): 650 x 600 mm - Cascades / Sequential valve gates: n/a - Heating zones: 4 2 - Control: CC200 - Core pulls: n/a - Oil tank capacity: - l - Operating hours: 16.280 - Power: installed max: 22 kW - Weight: 4.500 kg - Dimensions (long x wide x high): 4.300 x 1.300 x 1.900 mm

Manufacturer: AEG-ELOTHERM Type: ELBOMAT 443B Year of construction: 1994

Die-sinking EDM machine Manufacturer: AEG-ELOTHERM -Type: ELBOMAT 443B -Dimensions: 2600 x 2500 x 3300 mm -Object table size: 1200x800mm -Tool table: 280x200mm Status: Not tested! Electrical control panel -Dimensions: 1200 x 1500 x 2200 mm Cooling unit -Dimensions: 1200 x 1100 x 2200 mm

Eccentric Press Brand Ebu Type EP15 Table size 400x430mm Max pressure 15 000kg Table height adjustment Table passage D160mm Stroke adjustment 4-70mm Ram bore 40mm Projection 200mm Max distance table-tappet 320mm Single/Duration Stroke Shield Flywheel D600mm 400V 1.0kW Machine weight ca. 870 kg The purchase price is net. Can be viewed and tested in our warehouse. Delivery is possible at an additional cost. All information without guarantee!

verfügbar ab ca. 09-2023 - Producer Elmag Superfici - Type ETC-3/2-5500 - Year of construction 2003 - Working width 1.300 mm - Number of pallets 50 Stk. - Max. part height ~100 mm - Clearance height between the pallet 120 mm - Measure: middle pallet - middle pallet 3.800 mm - Max. part length 5.200 mm - Number of adjustable temperature zone 2 Stk. - Fresh air 9.000 m³/h - Heat output max. 2 x 45.000 kcal/53 kW - Drying temperature ~ 55 - 60 Grad - Incl. heat exchanger - Throughput in u-shape - Infeed side left - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 7.400 mm - Width 6.510 mm - Height 5.745 mm - Location, not in stock ab 09-2023 - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - Ohne Stellventile und Wasserpumpen

Blow molding machine for sale, fully functional. Manufacturer Extraplast Machinen GmbH Year 2008 Engine power 80kW Heating power 49kW Max. hydraulic pressure 250bar Max air pressure 10bar Working pressure 330 bar Form clamping 450 x 850mm Price negotiable - make an offer

Single head welding machine - ELUMATEC crushed arms and wrinkled one piece of cover Year: 2003

This Exeron EDM 310 MF 20 Erosion machine was manufactured in the year 2008 in Germany. It is equipped with an Exeron control unit. The machine was fully retrofitted in 2023 with 6 month warranty.

There are two identical eroding machines available, x-travel: 500mm, y-travel: 400mm, z-travel: 300mm, controls: ELOTRACE 3, operational hours counter: 56,600h.

Controls: AEG-Elotherm ELOPULS, with documentation.

An on-site inspection is possible.

Three-phase motor, electric motor -Power: 16 kW -Speed: 980 rpm -Construction: B3 -Protection class: IP 54 -Dimensions: 750/480/H400 mm -Weight: 223 kg

Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h -Dimensions: 425/420/H845 mm -Weight: 35 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, EMC module, mains filter -Manufacturer: SEW Eurodrive, EMC module -Type: EF075-503 -Voltage: 3x230V...500V I=20A -Dimensions: 340/170/H50 mm -Weight: 1.8 kg

Module converter, electronic module -Handover: in the current state as viewed -Electronic module: defective -Board type: ESS FE13-3 US4-1 -Dimensions: 260/180/H100 mm -Weight: 0.8 kg

Cable protection ring -Design: extra long -EWEM / XL: 4 x 35 - 150 mm² -Number: 2 pieces -Price: complete -Dimension: Ø 62 x 220 mm -Weight: 0.1 kg/piece

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press, -Safety cage fully closed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Projection: 190 mm -Strokes: 105 strokes/min -Plunger adjustable: 50 mm -Plunger area 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Projection: 180 mm

Electric motor, three-phase motor -Power: 5 kW -Speed: 1450 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 440/360/H305 mm -Weight: 69 kg

Elwa bag machine +Dietrich electronik perforator , max. whidth sealing 1250mm , min. 300mm . Thickness from 2x0,02 -0.2 . Speed 110cycles/minute when was new . Needles collection for the bags.

The Envirolyte ELA-2000 has been designed for production of Neutral Anolyte and Catholyte. Some automation and easy operating procedures give the added benefits to rapid elivery of safe and fast acting disinfectan - Neutral Anolyte. The strenght of Neutral Anolyte in terms of active chlorine concentration can be adjusted by current setting in de plc and valves.