british flag
Resale Logo

drilling and boring used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information dealer of used post press machinery  LA-POSTPRESS Landauer Alexander  http://www.la-postpress.de/ 
banner logo
start page > keywords drilling and boring > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121642179 107

OSTAS ORM 1070 x 130 for sale
Round Bending Machines


OSTAS ROUND BENDING MACHINE TYPE ORM 1070 x 130 -Capaciteit 1070 x 5 mm -Electrically adjustable achterrol -Electrically adjustable onderrol (materiaal klemming) -Digital uitlezing voor beweging achterrol -Digi ...

 
OSTAS ROUND BENDING MACHINE

TYPE ORM 1070 x 130

-Capaciteit 1070 x 5 mm
-Electrically adjustable achterrol
-Electrically adjustable onderrol (materiaal klemming)
-Digital uitlezing voor beweging achterrol
-Digital uitlezing voor beweging onderrol (materiaal klemming)
-Roll Harde
-Walsen Conisch
-Bovenrol Wegdraaibare
-Remmotor
-Noodstop
-Documentatie
-400V

DUTCHMACH
Metal working machinery
ENSCHEDE - NETHERLANDS

(3 km from the German border)
 
Price  
    request
121636956 202

HOFMANN TFS 1200, stufenlose Drehzahl for sale
Swivel spindle cutter, rotary cutter


Sturdy swivel milling machine TFS1200 by Hoffmann from vocational school with stepless speed adjustment Drive motor 5 / 6, 2kW with automatic motor brake R/L barrel Swivel angle from - 5 to 45 degrees electrically a ...
used machine
 
Sturdy swivel milling machine TFS1200 by Hoffmann from vocational school with stepless speed adjustment

Drive motor 5 / 6, 2kW with automatic motor brake
R/L barrel
Swivel angle from - 5 to 45 degrees electrically adjustable with digital display
Height adjustment electrically adjustable with digital display and in Krems Valley display
Speeds in 100 steps adjustable from 1000 to 10000 RPM
Spindle diameter 30 mm
Control Panel up, swivel
Comfort fence with fine adjustment by Handwheel and display of the total stop (as in incremental Valley counter null-adjustable), additional display of the single jaw
Stop rotating and elevating device away swiveling (for arc milling etc.)
pull-out workpiece support
2 AB table extensions with inset wood
Aigner integral stop 500 mm on both sides
3-roll feed Holzher 1117 with 8 speeds, R/L barrel, almost as good as new
New roles
Feed socket
Dust nozzle 2 x 120 mm
Emergency stop switch
Original condition, school machine

Dimensions approx. 1450 x 1300 x 1700 mm (Lxwxh). Weight approx. 1300kg.

Please the PDF file with our terms and conditions and order form.
The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider".
1994
9,400 €  
    request
121632752 805  

KBA RA 162-5 for sale


Maximum Size: 1200 x 1620 mm Full automatic plate change system FAPC VARIDAMP dampening Ink, Dampening and register control COLORTRONIC All automatic washers INTERCOM Refrigeration BALDWIN Powder spr ...
used machine
 
Maximum Size: 1200 x 1620 mm

Full automatic plate change system FAPC

VARIDAMP dampening

Ink, Dampening and register control COLORTRONIC

All automatic washers

INTERCOM

Refrigeration BALDWIN

Powder spray WEKO

Impression count: 149 millions
2003
Price  
  PT   request
121632751 1102

MTU(DAIMLER CHRYSLER) 4000 L61 for sale
Gas engines


MTU ENGINE 4000 L61 GAS OUTPUT: 1164 kW YEAR OF MANUFACTURING: 2005 HOURS: 45,326 GENERATOR: STAMFORD OUTPUT: 1550 KVA - 400V AC SCOPE OF SUPPLY The following are integral parts of generators and groups needed for  ...

 
MTU ENGINE 4000 L61 GAS
OUTPUT: 1164 kW YEAR OF MANUFACTURING: 2005
HOURS: 45,326
GENERATOR: STAMFORD
OUTPUT: 1550 KVA - 400V AC
SCOPE OF SUPPLY
The following are integral parts of generators and groups needed for its implementation (gas inlet, outlet energy):
•Generator (alternator, engine engine and PLC)
•Gas train
•Water cooling system (heat exchanger + complete pump)
•Oil Cooling System (heat exchanger + complete pump)
•Starting System
•Control Panels generator
•Electrical control panel accessories (pumps, etc)
•Technical Documentation
•Silencer
•Coolers
•Cooling system
 
Price  
  ES   request
121632750 107

BOLLINA for sale
Cutting-To-Length Lines


Bandwidth / strip width: 1,852 mm Band thickness / strip thickness: 0.5-3.0 mm Weight of coil / coil weight: 28,000 kg Setting rollers number / no of leveling rolls: 19 St / No. Setting rollers diameter / leveler-dia ...
used machine
 
Bandwidth / strip width: 1,852 mm
Band thickness / strip thickness: 0.5-3.0 mm
Weight of coil / coil weight: 28,000 kg
Setting rollers number / no of leveling rolls: 19 St / No.
Setting rollers diameter / leveler-dia: 50 mm
Stacking / length of stacking length: 4.000 mm
Stack weight / weight of stacking: 5,000 kg
2006
Price  
    request
121632746 107

HYBRID for sale
Longitudinal Cutting Lines


Band width max. / sheet maximum width: 1,550 mm Weight of coil / coil weight: 10 to. I Unwinder diameter coil / coil I slide. decoiler: 470-530 mm I winder diameter coil / coil I slide recoiler: 508 mm Power consumpt ...
used machine
 
Band width max. / sheet maximum width: 1,550 mm
Weight of coil / coil weight: 10 to.
I Unwinder diameter coil / coil I slide. decoiler: 470-530 mm
I winder diameter coil / coil I slide recoiler: 508 mm
Power consumption/power approx. 30 kW
Band thickness/strip thickness 420N/mm2 of 0.4-3.0 mm decoiler coil with hydraulic car with hydraulic arm with hydraulic contraction and release of rolls.
Sheet unwinding is performed via electromotor by start - stop system
The machine is in excellent condition and has approximately 70 hours of operation. /
The machine is in excellent condition and has about 70 hours of operation
2016
Price  
    request
121632744 107

HYBRID for sale
SLITTING AND CUT TO LENGTH LINE 1500 x 2mm


Bandwidth/strip width: 1500 mm Band thickness / strip thickness: 0.4-2.0 mm Speed/speed: 24 m / min Little hours/little operating hours
used machine
 
Bandwidth/strip width: 1500 mm
Band thickness / strip thickness: 0.4-2.0 mm
Speed/speed: 24 m / min
Little hours/little operating hours
2007
Price  
    request
121632742 101

EUMA VE 640 A for sale
Numerically Controlled Machining Centres


Machining center - vertical EUMA VE 640 A-Nr. 1105-02340 make EUMA type VE 640 A year 2000 State second-hand machine CNC CNC FANUC 18 M storage France country of origin Taiwan delivery after agreement based on cargo from ...
used machine
 
Machining center - vertical EUMA VE 640 A-Nr. 1105-02340 make EUMA type VE 640 A year 2000 State second-hand machine CNC CNC FANUC 18 M storage France country of origin Taiwan delivery after agreement based on cargo from site Technis Che details x trail 650 mm y way 450 mm z-way 410 mm table size 18 M BT 40 tool holder milling speed range - 850 X 450 mm CNC FANUC 10-8,000 rpm power - kW spindle 11 tool Magazine: chain magazine 24 PCs total power requirement 35 kVA machine weight approx. 4.5 t description strong MACHINE
WITH FANUC 18 M WITH 4/5 AXIS NIKKEN
8000 RPM 11 KW
MAGAZINE 24 SPECIALIST BT 40
2000
23,000 €  
    request
121632740 107

HYBRID for sale
SLITTING AND CUT TO LENGTH LINE 1250 x 2,0mm


Bandwidth/strip width: 1250 mm Band thickness/strip thickness: 0.4-2.0 mm Speed/speed: 24 m / min Weight / weight: 4,600 kg
used machine
 
Bandwidth/strip width: 1250 mm
Band thickness/strip thickness: 0.4-2.0 mm
Speed/speed: 24 m / min
Weight / weight: 4,600 kg
2007
Price  
    request
121632737 203

WEINIG HYDROMAT H23C for sale
Four-sided planing machines


-machine in stock -After reviewing the technical -very good condition -year of manufacture 2001 TECHNICAL PARAMETERS: PLANER: -planing width 230 mm -planing height 180 mm -spindle diameter 50 mm -the maxim ...

 
-machine in stock
-After reviewing the technical
-very good condition
-year of manufacture 2001

TECHNICAL PARAMETERS:

PLANER:
-planing width 230 mm
-planing height 180 mm
-spindle diameter 50 mm

-the maximum diameter 220 mm

-the feed rate to 80 m/min
-adjustable feed on the inverter

1) head the lower 15 kW
2) head right 11 kW
3) head left 11 kW
4) upper head 11 kW
5) upper head 18 kW
4) lower head 22 kW

-electrically height-adjustable
-electrically adjustable upper heads
-pneumatic clamps

-cardan shafts feed
-five top steel roller
-the two upper rollers, rubber
-four rolls in the worktop extending

-auxiliary pressure on the left of the head
-the last two heads on podtrzymkach
-nozzle diameter 140 mm

SYSTEM ADMINISTRATION:
-packet length 6100 mm
-width: 1200 mm
-height 1300 mm
-the possibility of stacking two packages at the same time
-for
-the brackets to the narrow items
-chain feeder 2500 mm
-initial material segregation
-Cross-feeder Planer 1500 mm
-hydraulic Accelerator

SYSTEM:
-conveyor 7000 mm
-the receiving table transverse conveyor 2100 mm
-receiving rollers-powered 6000 mm
-receiving roller and adjustable flame launchers, 7100 mm
-gravity rollers receivers

Automatic line strugaj?ca Weinig is a system for improving productivity, while increasing its efficiency. Solutions of this type are directed to the companies that make the process of automation of production facilities. Planing process elements is operated by two persons who are responsible for the initial choice of material and the reception. The principle of operation of the line shall be as follows, the material is delivered with a forklift on the chain conveyor, which thanks to its long sleeps two packages at the same time. This affects directly the effectiveness as it unfolded one of the operator can immediately place again at the right place, without downtime caused by not delivering material by fork-lift truck. Rozsztalowania system tilts the entire package and raises it at the same time, releasing the single guides layers that directly hit the chain feeder. The individual elements at this stage pass prequalification for those suitable for planing and waste. Material not suitable for further processing is separated by an operator who has a position at this stage, who, through the button adjusts the rollers stop line continuity by what material falls under the tray and does not goes to the Planer. Material that has passed segregation and is suitable for further stage goes through gravity rollers for another chain feeder. At the end of the feeder is equipped with a system of rollers and hydraulic Accelerator, which is responsible for moving items from the tray to the Planer Weinig Hydromat H23C. Planing process then takes place elements that has the possibility of processing them at speeds up to 80 m/min. Integrated system of elements after the planing them tape feeder table transverse equipped with automatic system dump the material. At this stage, ready to cross conveyors transporting it over the core. Material when you hit the Skate moved
is them to ejectors which expel material on gravity rollers where they are received by the employee. The line is the ideal solution for companies who appreciate the quality and the efficiency of the elements. Planer is able to meet even the most demanding expectations, while the system input and output only to increase its performance.
 
Price  
  PL   request
121632733 708

MTA AS for sale
Chillers


Cooling capacity: 265 kW Year of manufacture: 2008 Refrigerant circuit: 2 pieces Freon: R407C Compressors: 4 pcs. Danfoss (scroll) Number of fans: 4 pcs. Hydraulic module (water pumps 2pcs and buffer tank) Dimensi ...
used machine
 
Cooling capacity: 265 kW
Year of manufacture: 2008
Refrigerant circuit: 2 pieces
Freon: R407C
Compressors: 4 pcs. Danfoss (scroll)
Number of fans: 4 pcs.
Hydraulic module (water pumps 2pcs and buffer tank)
Dimensions: 4,55 x 2,3 x 2,2 m
Weight: 2500 kg

Need to change the evaprator (there is a spare one)
2008
Price  
  PL   request
121632731 201

FINESSE for sale
Panel saws


Panel saw vertical finesse Size: 510 x 205 cm 2 saw units (1 x horizontal, 1 x vertical) L x W x H: 620 x 260 x 100 cm Weight approx. 700 kg Built in 1975 Price does not include installation The machine is in  ...
used machine
 
Panel saw vertical finesse

Size: 510 x 205 cm
2 saw units (1 x horizontal, 1 x vertical)
L x W x H: 620 x 260 x 100 cm
Weight approx. 700 kg
Built in 1975
Price does not include installation

The machine is in good condition, ready to use.

Subject to changes, errors, prior sale!

Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH
Mechanical engineering
Mill mat 4
CH-4952 Eriswil/Switzerland

Tel. 0041 62 966 18 32
Fax 0041 62 966 21 12
1975
1,990 €  
    request
121632726 301

ARBURG 270V 500-150 for sale
Injection molding machines


OVERVIEW: Brand: Arburg Model: 270V 500-150 Application type: Injection moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1997 Production hours: 106863 Location: Germa ...
used machine
 
OVERVIEW:
Brand: Arburg
Model: 270V 500-150
Application type: Injection moulding
Machine type: Injection Moulding Machine
Availability: Immediately
Construction year: 1997
Production hours: 106863
Location: Germany
Origin country: Germany

GENERAL DATA:
Measurements width: 3615 mm
Measurements depth: 2085 mm
Measurements height: 1990 mm
Machine weight: 2250 kg
Automatic cycles: 13520148
Type of drive: Hydraulic
Closure: Hydraulic

CONTROL UNIT:
Brand: Arburg

INJECTION UNIT:
Heating capacity: 4 x 1.2 kW
Adjustable heating zones: 4
Nozzle pressure: 60 kN

CLAMPING UNIT:
Clamping force: 500 kN
Opening stroke: 350 mm
Max. open daylight: 550 mm
Distance between bars (h x v): 320 mm
Size of mold platens: 405 mm
Ejector stroke: 125 mm
Ejector force for / back: 30 kN

MEDIA:
Main electronic connection: 400 V / 50 Hz / 3 P
Power consumption: 24.7 kVA
Oil tank: 160 L
1997
Price  
  DE   request
121632725 201

STEFANI for sale
Joiners circular saws


Saws of Stefani with sliding table Cutting length 2500 mm, angle-adjustable 45° Parallel cutting area 1000 mm with SUVA protection with the length stop Bösch L x W x H: 270 x 200 x 150 cm Weight approx. 690 cm  ...
used machine
 
Saws of Stefani with sliding table

Cutting length 2500 mm, angle-adjustable 45°
Parallel cutting area 1000 mm
with SUVA protection
with the length stop Bösch
L x W x H: 270 x 200 x 150 cm
Weight approx. 690 cm
Built in 1982

The machine is in good condition, ready to use.

Subject to changes, errors, prior sale!

Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH
Mechanical engineering
Mill mat 4
CH-4952 Eriswil/Switzerland

Tel. 0041 62 966 18 32
Fax 0041 62 966 21 12
1982
3,390 €  
    request
121632723 301

ARBURG 270S 500-150 for sale
Injection molding machines


OVERVIEW: Brand: Arburg Model: 270S 500-150 Application type: Injection moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 2000 Production hours: 79620 Location: German ...
used machine
 
OVERVIEW:
Brand: Arburg
Model: 270S 500-150
Application type: Injection moulding
Machine type: Injection Moulding Machine
Availability: Immediately
Construction year: 2000
Production hours: 79620
Location: Germany
Origin country: Germany

GENERAL DATA:
Measurements width: 3125 mm
Measurements depth: 1115 mm
Measurements height: 1850 mm
Machine weight: 2250 kg
Automatic cycles: 13086699
Type of drive: Hydraulic
Closure: Hydraulic

CONTROL UNIT:
Brand: Arburg

INJECTION UNIT:
Heating capacity: 4 x 2.1 kW
Adjustable heating zones: 4
Nozzle pressure: 70 kN

CLAMPING UNIT:
Clamping force: 500 kN
Opening stroke: 350 mm
Max. open daylight: 575 mm
Distance between bars (h x v): 320 mm
Size of mold platens: 472 mm
Ejector stroke: 125 mm
Ejector force for / back: 30 kN

MEDIA:
Main electronic connection: 400 V / 50 Hz / 3 P
Power consumption: 22 kVA
Oil tank: 160 L
2000
Price  
  DE   request
121632721 835

POLYGRAPH 703/1 for sale
Saddle Stitcher


Cleaned Stapling machine Standart equipment Top condition
used machine
 
Cleaned
Stapling machine
Standart equipment
Top condition
1962
Price  
    request
121632719 101

OPTIMUM B28H for sale
Column-Type Drilling Machines


Technical data: -Manufacturer: Optimum -Type: B28H -BJ. CA 2007 Recording MK3 Kill speed control via hand strap Right / linkslauf Weight approx. 300 kg High current 16A -Dimensions: approx. 1800x700x800mm -Tisc ...
used machine
 
Technical data:
-Manufacturer: Optimum
-Type: B28H
-BJ. CA 2007
Recording MK3
Kill speed control via hand strap
Right / linkslauf
Weight approx. 300 kg
High current 16A
-Dimensions: approx. 1800x700x800mm
-TischmaÃ?e about 350x350mm
2007
900 €  
    request
121632717 209

MAFELL for sale
Joinery chain saw


Joinery chainsaw MAFELL Cutting depth 250 mm L x W x H: 30 x 20 x 60 cm Weight 20 kg Built in 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare part ...
used machine
 
Joinery chainsaw MAFELL

Cutting depth 250 mm
L x W x H: 30 x 20 x 60 cm
Weight 20 kg
Built in 1987

The machine is in good condition, ready to use.

Subject to changes, errors, prior sale!

Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH
Mechanical engineering
Mill mat 4
CH-4952 Eriswil/Switzerland

Tel. 0041 62 966 18 32
Fax 0041 62 966 21 12
1987
660 €  
    request
121632713 209

HOLZHER for sale
Feed


Feed HolzHer 3-roll feed with tripod L x W x H: 100 x 40 x 80 cm Weight approx. 100 kg Built in 1970 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare pa ...
used machine
 
Feed HolzHer

3-roll feed with tripod
L x W x H: 100 x 40 x 80 cm
Weight approx. 100 kg
Built in 1970

The machine is in good condition, ready to use.

Subject to changes, errors, prior sale!

Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH
Mechanical engineering
Mill mat 4
CH-4952 Eriswil/Switzerland

Tel. 0041 62 966 18 32
Fax 0041 62 966 21 12
1970
1,732 €  
    request
121632710 209

SCHNEEBERGER for sale
Sharpening machine


Sharpening machine Schneeberger for blades and chisels L x W x H: 60 x 60 x 70 cm Weight 130 kg Built in 1975 Bahv3e8hqg The machine is in good condition, ready to use. Subject to changes, errors, prior sale ...
used machine
 
Sharpening machine Schneeberger

for blades and chisels
L x W x H: 60 x 60 x 70 cm
Weight 130 kg
Built in 1975
Bahv3e8hqg

The machine is in good condition, ready to use.

Subject to changes, errors, prior sale!

Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH
Mechanical engineering
Mill mat 4
CH-4952 Eriswil/Switzerland

Tel. 0041 62 966 18 32
Fax 0041 62 966 21 12
1975
580 €  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter