We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,244 used machines on RESALE, but how to find them? Machine Search
used
Pressure reducing valve, direct-operated, hydraulic valve REXROTH ZDR 6 DP1-40/50YM ( ZDR6DP1-40/50YM ) 481853/0 210 bar used, tested ! Dimensions: 220 x 45 x 40 mm
used
Pressure reducing valve, direct controlled, hydraulic valve REXROTH ZDR 6 DP1-40/50YM ( ZDR6DP1-40/50YM ) 481804/3 210 bar used, tested ! Dimensions: 220 x 45 x 40 mm
used
Engine lathe NILES DP1/S3 Year of manufacture: 1988 Manufacturer: NILES Made in Germany Machine is almost not used, complete Technical Data: Height of center over bed: 800mm Max. processing diameter over bed: 1.600mm Max. processing diameter over support:1.250mm Min. work-piece diameter: 250mm Max. work-piece weight: 40.000kg Max. work-piece diameter: 1.250mm Internal spindle cone (1:10): 120mm Range of longitudinal support feeds: -1st row (stepless adjustment): 1-200mm/min -2st row (stepless adjustment): 36-3600mm/min Range od feeds of transversal slides: -1st row (stepless adjustment): 0,4-80mm/min -2st row (stepless adjustment): 14,4-1440mm/min Range of feeds of cross slides: -1st row (stepless adjustment): 0,12-25mm/min -2st row (stepless adjustment): 4,5-450mm/min Length of travel: -Of transversal slides: 760mm -Of cross slides: 500mm -Of incisive ca ...
used
Tip height: 1250 mm Turning diameter: 2,500 mm over bed Centre distance: 4.000 mm Support motion: 750 mm longitudinal feeds 630 mm cross feeds Face plate: Ã? 1250 mm Spindle speed: 5.6-280 RPM. Spindle bore: 100 mm Workpiece weight: 10.000 kg Equipped with: -Floor plates 4.500 x 2.200 mm -Powered tailstock -Operating instructions Country of origin: Germany Engine power: 45 kW Machine weight: 18,000 kg Machine Lxwxh: 8,000 x 4,000 x 2,100 mm
used
; Gross weight [kg]: 5650; Engine: Doosan DP180LB; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1000
used
; Gross weight [kg]: 3600; Engine: Doosan DP126LB; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 625
used
; Gross weight [kg]: 4200; Engine: Doosan DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 800
used
; Gross weight [kg]: 4800; Engine: Doosan DP180LA; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1000
used
Belt grinding station, support table with T-slot, Sanding belt width 100 mm, Sanding disc D 300 mm, with support table 350 x 140 mm, Suction connection available. Motor power: 0.9/ 1.3 kW 400 V/ 50 Hz 1450/ 2900 rpm Connection cable with CEE plug 16 A Machine dimensions: H 1450 x D 410 x W 900 mm Weight approx. 200 kg Transport vertical, bolted to EURO pallet.
used
AIR JET MACHINES NUMBER 25 POSITIONS HEBERLEIN JET
used
Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm
used
Gear motor, electric motor -Speed: 127/254 rpm -Power: 0.55/0.9 kW -Construction: B3 -1x shaft diameter: Ø 25 mm -3x shaft diameter: Ø 24 mm -Protection class: IP 54 -Number: 4x engines available -Price: per piece -Dimensions: 560/270/H240 mm -Weight: 43 kg
used
NUMBER 60 POSITIONS
used
Gear motor BAUER DP 1A1221AH/283 ( DP1A1221AH/283 ) 0.18 / 1.1 kW 11 / 66 rpm 220 / 380 V IP65 shaft diameter: Ø 30 mm used, tested ! two speeds ! Dimensions: 600 x 270 x 220 mm
used
Min/Max cutting length 230/1.000 mm. Max cutting width 1.250 mm. Max unwinder diameter 1.030 mm. n.2 unwinders available max reel weight per shaft 1.000 kg. nominal max cutting speed 130 m/min nominal max thickness 220-240 gr/sqm photocell for prints antistatic bar total dimensions LxW 2,2 x 4,8 mt. kg. 4.200, constructed in cast iron sound level under 75 Db power 16 kw Technical specs given by previous owner or constructor machine checked for good conditions, Construction year 2000, check on [this video](https://youtu.be/867xqXH-bb0), full reconditioning with addition of accessories, available on request
used
DEPA Membrane / Diaphragm, 100ltr / minute, Fully refurbished