british flag
Resale Logo

double screw type used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used machine tools  S+B Maschinenhandelsgesellschaft mbH  http://www.sb-maschinen.de 
banner logo
start page > keywords double screw type > results
72 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4
120168122 703

VELATI M2000 for sale
Mixers and vacuum mixers


Product number: 1043 Type: M2000 Serial number: 005305 Year of construction: 2005 Mixer: 200 L double shaft paddle mixer Diameter outfeed screw: 225 mm Power: 3 x 400V, 50Hz, 26kW Dimensions: 4650 x 1350 x 3150 mm ...
used machine
 
Product number: 1043
Type: M2000
Serial number: 005305
Year of construction: 2005
Mixer: 200 L double shaft paddle mixer
Diameter outfeed screw: 225 mm
Power: 3 x 400V, 50Hz, 26kW
Dimensions: 4650 x 1350 x 3150 mm
Machine is in new condition, never used.
2005
Price  
  NL   request
118762387 401

KHS GMBH compete bottle filling line for sale
PET Bottle Filling Line KHS 30.000 bph


PET bottle Filling Line KHS 15 750 - 30 000 bph This complete beer filling line was delivered by KHS in year 2005 and it is still installed and in very good condition. This line is complete from preform feeding equipm ...
used machine
 
PET bottle Filling Line KHS 15 750 - 30 000 bph

This complete beer filling line was delivered by KHS in year 2005 and it is still installed and in very good condition. This line is complete from preform feeding equipment to delivery package palletizing. Originally this line was designed to fill from 0.5, 1.5 to 2.0 liter PET bottles with max 6 gram / liter CO2 and max + 16 C degree product temperature. In 2006 it was modified for 2.5 liter with adding a new labeler. Line is available for immediate relocation

Main characteristics of this line:
Manufacturer: KHS GmbH
Operation started in: year 2006
Total working hours: approx 27 000
Condition: Operation stopped in September 2014, installed
Effective capacity: 30 000 bph in 0.5 L PET
22 000 bph in 1.5 L PET
15 750 bph in 2.0 L PET
Neck standard: PCO 28 mm
Delivery packs 2.0 -2.5 L PET in 2 x 3 tray and shrink plastic
1.5 L PET in 3 x 3 tray and shrink plastic
1,5 L PET in 3 x 3 only shrink plastic
Labeling: Paper label, cold glue, front and neck
Plastic label, hot glue, front
Products used for: Beer
Control PLC Siemens Simatic S 7 / ET 200
Line suitable with mixer for: Carbonated and non carbonated drinks

Videos of this line:

Blomax: abcs://youtu.be/igj3F_vZc8U
General introduction: abcs://youtu.be/r1zhaBVF7Bg

List of equipment
Item 1: Stretch blow molding machine SIG Blomax 14, serie III
Nominal capacity 32000 bph in 0.5 liter and 17 500 in 2.0 liter
Max bottle height is 380 mm, max diameter 108 mm
Serie III is equipment with Airback / Air recycling system
Complete preform feeding system by Tanner with safety fence
Riedel Cooler for the blow molder equipment with R407C Freon + radiator cooler

Item 2: PET Compressor Ateliers Francois 2100 Nm3/h
Compressor is 3-stage, intercooled GE68B, 480 rpm, 350 kW
Air dryer and 40 bar galvanized air receiver 1 m3
Radiator type water-air cooler for compressor cooling

Item 3: KHS Air-conveyor system Innoline LTR
Automatic size adjustment- suitable for 49-108 mm diameter bottles

Item 4: Filler Block with
Rinser KHS Innorins PET-FR-ZM 80/36
This is a mechanical rinser with a two-channel working for pre-rinsing
with water or disinfectant. Final rinsing with water. 80 rinsing stations and 2880 mm rinser diamer.

Filler - Capper KHS Innofill DRF PET 120 SC 10/36
The Innofill DRF PET is a computer-controlled, PET bottle filler that uses probes integrated into the filling tubes to determine fill levels. The filler has 120 filling nozzles and 10 capping stations for PCO 28 caps. NSM Magnettechnic cap feeding system.

Item 5: Filling Control Station Heuft Basic BA R20 with X-ray, capacity 25 000 bph

Item 6: Full bottle conveyor system Innoline BTR with automatic lubrication system

Item 7: Labeling machine Innoket ROLAND KH 20/5 II, capacity 4000 - 32000 labels/h
This Roland labelers has 20 bottle turrets and 2 labeling stations with 5-finger drums for label application. Paper labels, cold glue system.

A feedscrew spaces the containers before they are channeled into the rotating machine
by an infeed star. Hot glue is evenly distributed, thin film of glue on the gluing segments picks up labels from the stationary magazine. The individually spring loaded fingers of the gripper drum grasp the glued labels and apply them in the exact position on the containers.

Item 8: Laser Marking system Coder Allmark AL 882 APS

Item 9: Label Inspector Heuft Basic BA R20 with X-ray

Item 10: Labeling Machine Krones Contirol K-745-L17, year 2006
Plastic labels, hot glue system, 2 rolls with automatic switch over
Capacity 15 000 - 17 000 bph with 2.5 liter PER

Item 11: Tray Shrink Packer KHS TSP 35-700, year 2007
Capacity up to 35 cycles per minute

Item 12: Tray conveyors KHS Innoline GTR with automatic lubrication system

Item 13: Label Inserter Metec on delivery packs

Item 14: Palletizer KHS Innopal PB 1/2 N2 capacity 27 000 bph in 1.5 Liter
Double line palletizer suitable for 800x1000 and 1000x1200 cm pallets
Pallet magazine KHS MPH
Carton layer inserter robot
KHS PTR pallet conveyors
KUKA / Siemens PLC controls

Item 15: Pallet Stretch Wrapper Robopac Helix HS 40
Siemens Simatic S 7 PLC contols

Item 16: Pallet lift KHS Lord Pac with a pallet coder
2006
Price  
  FI   request
115275207 302

BERSTORFF 25 x 32 D for sale
Double screw-type extruding machine


- incl. operating platform to put gravimetric dosing units on - incl.tempering units - incl. spare screw elements Was only used under laboratory conditions.
used machine
 
- incl. operating platform to put gravimetric dosing units on

- incl.tempering units

- incl. spare screw elements

Was only used under laboratory conditions.
1992
34,000 €  
  CH   request
110785818 302

FEDDEM 72 MTS for sale
Double screw-type extruding machine


Complete extrusion line with support for sale, dispense, extrude, granulate and SAG (complete pictures in the PDF). Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF an ...
used machine
 
Complete extrusion line with support for sale, dispense, extrude, granulate and SAG (complete pictures in the PDF).

Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, new price from 690.000 €

Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers

Side feeder: Feddem/Flender

Vacuum pump: Integrated

Granulation: IPS SG120/7.5, 2000, 9 kW

Also here: Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote
1999
215,000 €  
  DE   request
106184497 102

HESSAPP DVH 250/320 for sale
Vertikal Turning Machines (Lathes)


Working area chuck diameter max. mm 315 turning diameter mm 250 swing mm 320 workpiece height incl. height of chuck mm 300 travel – X-Axis mm 450 travel – Z-Axis mm 300 spindle nose DIN 55026 A 6 spindle d ...
used machine
 
Working area
chuck diameter max. mm 315
turning diameter mm 250
swing mm 320
workpiece height incl. height of chuck mm 300
travel – X-Axis mm 450
travel – Z-Axis mm 300
spindle nose DIN 55026 A 6
spindle diameter in front bearing mm 100
spindle rotation speed rpm 5.000
rapid motion – X-Axis mm/min 60.000
rapid motion – Z-Axis mm/min 30.000
Disc turret head with driven tools
turret head station 12
shaft diameter DIN 69880 VDI mm 40
driven tools station 12
spindle rotation speed max. rpm 3.000
power requirement at 25% duty cycle kW – U/min 0,35 – 100
power requirement at 25% duty cycle kW – U/min 10,3 – 3.000
Main spindle
electrics – voltage / frequency V/Hz 400/50
power requirement at 100% / 40% / 25% duty cycle kW 28 / 36 / 42
torque at 100% / 40% / 25% duty
cycle Nm 300 / 384 / 440
Dimension and weight
machine weight approx. kg 7.000
dimension of the machine mm 3.250 x 2.490
height of the machine mm 2.910

Accessories and further Information:

CNC-control system SIEMENS 840D
Safety Integrated
X-axis: digital servodrive and ball screw
Z-axis: digital servodrive and ball screw
3-jaw power chuck, make SCHUNK, type ROTA NCO 315
part seat monitoring make IFM, type PS7570
clamping cylinder make STIEFELMAYER
turret head with driven tools and internal coolant supply – make LARU
oval conveyor system with pallets and workpiece turnover station for double side
machining for max. workpiece diameter up to 250 mm
coolant attachment with 950 l tank with metal-edge filter system make MAHLE with
radial cleaning type PI 7243, reinforced central pump output max. 80 l/min at 11,5 bar with an inlet pressure of 3 bar
chip conveyor - hinged belt conveyor, make Buerener Maschinenfabrik GmbH
2004
Price  
  DE   request
100224807 103

INGERSOLL-BOHLE MCT 2 for sale
Planer-Type Milling M/C - Double Column


Control - SIEMENS 840 C x-travel - 5600 mm y-travel - 3617 mm z-travel - 828 mm Rapide traverse - 12000 mm/min Turning speeds - max. 2500 U/min max. torque on the spindle - 1750 Nm Tool taper - SK 50 Gear box - ...
used machine
 
Control - SIEMENS 840 C

x-travel - 5600 mm
y-travel - 3617 mm
z-travel - 828 mm
Rapide traverse - 12000 mm/min
Turning speeds - max. 2500 U/min
max. torque on the spindle - 1750 Nm
Tool taper - SK 50
Gear box - 3 x
Screw conveyor self-made
4 - axis Portal processing center with 5-sided machining, pallet changer and tool arena with KUKA robot SK50 with storage space for 270 tools
Max./Min. Distance at angle head Spindle center> Table - with pallet: max. 979 mm / min. 151 mm, without pallet: max. 1.231 mm / min. 403 mm
Max./Min. Distance vertical head spindle nose> table - with pallet: max. 1080 mm / min. 252 mm, without pallet: max. 1.330 mm / min. 502 mm
Table size / pallet size Length / width / height - 2 pallets of 5,000 x 2,000 x 200 mm 3D system
Without pallet - 2 tables with 2,000 x 1,250 mm, distance 700 mm with t-slots
1989
Price  
  DE   request
96629193 302

Werner & Pfleiderer ZSK90 for sale
Double screw-type extruding machine


Werner & Pfleiderer ZSK 90. Compounding Line with Gala pelletiser including:- Werner & Pfleiderer extruder,ZSK 90 co-rotating twin screw. head type B34/76 M240 Year 1993. 11 Barrel sections.2 Vent Sections. With ...

 
Werner & Pfleiderer ZSK 90. Compounding Line with Gala pelletiser including:-

Werner & Pfleiderer extruder,ZSK 90 co-rotating twin screw. head type B34/76 M240

Year 1993. 11 Barrel sections.2 Vent Sections.

With W & P side feeder.

Machine L/D 36. Main drive 320Kw, max speed 600rpm

Two Brabender feeders, with infeed hopper(1996) -

S & S metal separators with Primus control with exiting pipework.(2010) -

With additional auxillary equipment, including dry face cutter head,
strand die system, additional spare cutter screening system with hydraulic pack.

Gala pelletising system,with stainless steel electrically regulated cooling vessel, with transfer pump, main control panel.

Forsberg powered vibratory transfer conveyor,DCE Unimaster dust extraction unit.



 
Price  
  UK   request
96039317 302

CANZIANI TR - 60/30 for sale
Profile extrusion lines and extrusion plants


Complete line of extrusion for the production of double strap 11 x 0.8 mm polypropylene. Scope of delivery: A) Hopper Loader B) Single screw extruder type TR - 60/30 diameters. Complete with electrical panel. C) Ma ...
used machine
 
Complete line of extrusion for the production of double strap 11 x 0.8 mm polypropylene.
Scope of delivery:
A) Hopper Loader
B) Single screw extruder type TR - 60/30 diameters. Complete with electrical panel.
C) Manual Screen Changer
D) Double exit die head.
E) Under water bath
F) 1 Strech Board 5 reel.
G) Hot water Stretching table.
H) 2nd Strech Board with 5 reels.
I) Zigrinatore / embosser.
L) Stabilization tank with hot air.
M) Water cooling tank.
N) Drying system
O) Puller
P) No 2 double winders.

Switchgear for single machines synchronized.
Hourly Production: 80 Kg (Approx)

Everything will be provided in accordance with EC Directive 2006/42/EC as amended and adapted
CONSTR. MECC.
2013
Price  
    request
93048590 101

EMSIL HBMI-200 for sale
Boring Mills


Horizontal Boring and Milling Machine type EMSIL HBMI-200 CNC - Horizontal boring spindle diameter: 200 mm - Max. spindle speed: 1500 rpm - Spindle motor power: 60 kW - Spindle taper: ISO-50 (DIN-69871) - RAM sectio ...
used machine
 
Horizontal Boring and Milling Machine type EMSIL HBMI-200 CNC
- Horizontal boring spindle diameter: 200 mm
- Max. spindle speed: 1500 rpm
- Spindle motor power: 60 kW
- Spindle taper: ISO-50 (DIN-69871)
- RAM section: 530x600 mm
- Longitudinal column travel X-Axis: 10500 mm
- Vertical travel of headstock Y-Axis: 3000 mm
- Transversal travel of RAM Z-Axis: 900 mm
- Transversal travel of boring spindle W-Axis: 1100 mm
- Total travel Z+W: 2000 mm
- Rapid feed on axes X-Y-Z-W = 10-8-8-8 m/min
- Heidenhain encoders on X, Y, Z and W axes
- Hydrostatic guideways on X, Y and Z axes
- Displacement on axis X with double pinion backlash free gearbox
- Ballscrews with recirculating balls preloaded on axis Z and W
- Telescopic covers on axis X
- Vertical protection of vertical axis with sheet metal cover type guillotina”
- Operator cabin, 1 piece
- Control of the machine FANUC CNC
- Manual electronic handwheel
- External tool cooling unit
- Levelling devices for foundation, 1 set
2017
Price  
  RO   request
84844069 304

WELEX - ILLIG RDM50K for sale
Thermo forming machines


Inline Welex coextrusion line with Illig RDM 50K cup forming machine, ILLIG RS75B Grinder. Illig UG70B Stacker/ Counter, Age 1997, 90 mm Main Welex single screw extruder. 30D vented. 75 kW dc motor. Water cooled barr ...
used machine
 
Inline Welex coextrusion line with Illig RDM 50K cup forming machine, ILLIG RS75B Grinder. Illig UG70B Stacker/ Counter, Age 1997,

90 mm Main Welex single screw extruder. 30D vented. 75 kW dc motor. Water cooled barrel.
50 mm Welex coextruder. 24D fan cooled, mounted on pedestal
Hydraulic lantern slide screen changer
Welex 56/ 56 gear pump
Welex ABA square type feedblock with replaceable insert
860 mm wide Welex R75 flexlip sheet die. 0 - 1.9 mm die gap.
1040 mm x 450 mm 3 roll cooling/ polishing stack. with DC motors.
3 zone pump group with heaters and heat exchangers.
2 roll 890 mm wide haul off. age 1997

Illig RDM 50K Thermoformer with standard mechanical Indexing, age 1997
Double Heating, Total 45.1 kW
Max. Form Area 500 mm x 280 mm
Max draw 125 mm.
Max. sheet width 525 mm.
Max Indexing Length 300 mm
Auto Rail Spreading for PP
Temperature controls for multi zone top and bottom heater banks
Separate Illig control panel with optimized drive and Schleicher plc controls
Pneumatic Plug Assist

ILLIG RS75B grinder with system to turn waste material through 90 degs.
Illig UG70 stacker/ Counter.

Including 1 x Complete Mold for round cups with Complete Collector Plate & stacking basket for the ILLIG ÜG70B
Video with Equipment in production available
1996
Price  
  UK   request
81649974 501

NGR S:GRAN 85 V HD for sale
Repelletising plants


Material that can be processed: LDPE, HDPE, LLDPE, LD/LLD/HD-PE film, scraps, partly printed clean, wastes Screw diameter: 85 mm Outpu up to 300 kg/h, depending on type of material and feeding rate Screen changer: Ye ...
used machine
 
Material that can be processed: LDPE, HDPE, LLDPE, LD/LLD/HD-PE film, scraps, partly printed clean, wastes
Screw diameter: 85 mm
Outpu up to 300 kg/h, depending on type of material and feeding rate
Screen changer: Yes
Pressure sensor: Yes
Conveyor belt: Yes
Degassing: Double degassing
Power: Voltage: 3 x 400V + N + Pe
Installed power: 200 kW

Attachments and Accessories:
Metal detector
Roll feeder
Hot granulation Die face cutter
Water bath
Centrifuge
Extraction blower
Cyclone

Can be seen in production.

We can assist you with dismantling, loading and transport.
2007
Price  
  DK   request
81553776 501

EREMA TVE 1109 for sale
Repelletising plants


Material that can be processed: PE, PP, PA, PETP, PS, ABS, LDPE, HDPE, MDPE Screw diameter 90 mm Output up to 400 kg/h, depending on the type of material and feeding rate. Screen changer SW4 /134 RTF Backflush double ...
used machine
 
Material that can be processed: PE, PP, PA, PETP, PS, ABS, LDPE, HDPE, MDPE
Screw diameter 90 mm
Output up to 400 kg/h, depending on the type of material and feeding rate.
Screen changer SW4 /134 RTF
Backflush double piston
Pressure sensor
Conveyor belt
Double degassing
Power: Voltage: 3 x 400V + N + Pe

Attachments and Accessories:
Conveyor belt
Reel feeder
Metal detector
Hot granulation Die face cutter
Cutter-compactor/Agglomerator
Water bath
Centrifuge
Extraction blower
Cyclone
Chiller

In good working conditions.
Can be seen in production.

We can assist you with dismantling, loading and transport.
2006
Price  
  DK   request
80345783 302

KRAUSS MAFFEI KMD 2-60 KK for sale
Double screw-type extruding machine


Twin-screw extruder KMD 2-60 KK Type: KMD 2-60 KK Manufacturer: Krauss Maffei Year of construction: 1991 Machine number: 206317 more information on request
used machine
 
Twin-screw extruder KMD 2-60 KK

Type: KMD 2-60 KK
Manufacturer: Krauss Maffei
Year of construction: 1991
Machine number: 206317
more information on request
1991
Price  
  DE   request
80344687 302

KRAUSS MAFFEI KMD 2-40 for sale
Double screw-type extruding machine


Twin-screw extruder KMD 40 Manufacturer: Krauss Maffei Type: KMD 2-40 Year of construction: 2000 More details on request
used machine
 
Twin-screw extruder KMD 40

Manufacturer: Krauss Maffei
Type: KMD 2-40
Year of construction: 2000

More details on request
2000
Price  
  DE   request
78867661 107

HERA Cop 80/2600 for sale
CNC Pressbrakes


Make: Hera Type: Cop 80/2600 Year of construction: 1991 Bending length: 2600 mm Pressing force: 80 to Control: Cybelec DNC 90 Passage between the pressing bars: 400 mm Distance between the stands: 2100 mm Delivery speed: ...
used machine
 
Make: Hera
Type: Cop 80/2600
Year of construction: 1991
Bending length: 2600 mm
Pressing force: 80 to
Control: Cybelec DNC 90
Passage between the pressing bars: 400 mm
Distance between the stands: 2100 mm
Delivery speed: 90 mm / s
Folding speed: 10 mm / s
Return speed: 90 mm / s
Working height: 900 mm
Stroke: 250 mm
Length: 2800 mm
Width: 1300 mm
Height: 2400 mm
Weight: 6500 kg

Standard equipment
-Sturdy steel frame welding structure
-Optimal self-lubricating press bar leadership on four widely spaced flat guides, as well as two indoor-looking page guides
-Small table
-Split-flush with the press bar top tool blocks
-Compensation of stand up suspension on separate measurement framework
-Press bar recording created for Promecam/Amada tools

Hydraulic
-Modern block hydraulic
-Proportional valve technology
-Fully hydraulic tracking and positioning control
-Safety circuits (UVV)

Numerical control Cybelec DNC 30
-Easy to use dialog control
-Complete position, velocity and pressure control
the upper tool
-Sensitive operation
-Possibility of conical bends
-Great products and tools hard disk
-Pluggable silicone platter
-Data backup, storage expansion
Auto Diagnostics with fault indication
-Interface for PC connection

CNC back gauge
Basic version
-X-axis - fence
-Stable, backlash-free double linear guides, side in the stands
-Ball screws by means of controlled DC motor drives
Variable speed range 500 mm, Max 400 mm / sec, speed
Accuracy +/-0.1 mm
-2 folding stop fingers with ball bushing Guide, by vorene
move using a special key - and can be locked

Advanced facilities
-2 additional stop finger - R axis: Automatic height adjustment
-CNC crowning
-Hydraulic top tool clamping for lateral and vertical
De - and re-Assembly
-Hydraulic Romanipublished tool DD 006: plug-in matrix container with integrated hydraulic Romanipublished device for sheet metal up to 2 mm over
Helper functions can be programmed, material 42 CR MO 4
-Sektionierte plug-in die 2600 mm
-CNC controlled pneumatic way circuit for two pieces of die
-Sektionierte stamp 2600 mm
-CNC controlled pneumatic way circuit for 2 punch end caps

3D-Graphiksteuerung Cybelec DNC 90
-With internal fixed memory SRAM 1 MB and 3 1/2 inch floppy disk 1.4 MB

Hydraulic bending help
-2 piece front support arms with integrated CNC controlled swing arms
-Cross translation over ball bushing Guide
-Height adjustment by means of trapezoidal spindle acupuncture ratchet
-Swivel angle and speed of programmable
-Lifting capacity of the cylinder about 10 KN
-Swivel arms on approximately 1600 mm telescopic

1991
Price  
  DE   request
77892464 1407

LTP for sale
roller path curve incl. feet


Properties < b >: < / b > New 90 degree rolling trajectory dense roll trim Material: Steel, galvanised Ideal for the fast material handling Expertly disassembled and pack ...
used machine
 
Properties < b >: < / b >

New 90 degree rolling trajectory
dense roll trim
Material: Steel, galvanised
Ideal for the fast material handling
Expertly disassembled and packed
Drive type: gravity
includes 3 feet
Color: silver/grey
Year: 2013
Manufacturer: LTP

Technical data < b >: < / b >

Mass < b > of rolling trajectory < /b >
Overall length: 2043mm
Total width: 550 mm
Curves angle: approx. 90 ° degree
Inner radius: 800 mm
Length: 500 mm
Inside pitch: 52 mm
Height: 620-1.145 mm

the role < /b > < b > information on roll width approx.: 480 mm
Roll diameter: 50 mm
Center distance outside: approx. 90mm
Material: Plastic

Frame height frame < /b > details < b >: 80mm
Frame width: 25mm
Material: Steel

Rolling trajectory < b > < /b >

Sidewalls from sendz. galvanised C-profile 8/25/75/25/8 mm, hole pattern 8 mm. Equipped with 3-split rollers series 1.2.50.5.12.1.2.08.0 from grey plastic pipe Ã? 50 x 2, 8 mm wall, axis Ã? 12 mm, spindle ends female thread M 8, support roller floor from plastic with light running special ball bearings in the plastic housing.

Under screw bridge legs series 503 in sturdy welded construction made from square tubing with cross-beams, adjustment by means of telescopic Council-a rectangular tube, fixable via fixing screw M 12. With floor plates and adjustable support plates with swivel joint.


Accessories < b >: < / b >
double-sided black plastic cover the sidewalls with front-end caps

Tailor-made solutions < b > for your intralogistics < /b >

We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.

Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
2013
849 €  
  DE   request
76903992 302

LEISTRITZ LSM 30.34 GG for sale
Double screw-type extruding machine


• Double screw extruder LEISTRITZ • B.j..: 1992 • type: LSM 30.34 • Snails: 34/30 LD - GG • AC motor - 14 kw • extruder heating - 10 kW &a ...
used machine
 
• Double screw extruder LEISTRITZ • B.j..: 1992 • type: LSM 30.34
• Snails: 34/30 LD - GG
• AC motor - 14 kw • extruder heating - 10 kW
• Screw speed: 300 RPM.
• Material dosing
• Extruder cylinder: Aircooled • degassing: atmospheric
• Strand heads: 4 x • screen changer: 1 x • water bath VA • granulator SCHEER SG-50
• Control panel with touch screen Mana
• Control cabinet dimensions: (l x w x h) 2,265 x 907 x 1,970 mm machine is plugged in and is ready for testing.
Test is possible. Date by arrangement.
1992
Price  
  DE   request
75719532 501

EREMA 1500 TVE-DD for sale
Repelletising plants


Material that can be processed: PE, PP, PS, ABS, LDPE, HDPE, MDPE Screw diameter: 120 mm Output: Up to 800 kg/h, depending on the type of material and feeding rate. Screen changer: 4 pistons screen changer Pressure s ...
used machine
 
Material that can be processed: PE, PP, PS, ABS, LDPE, HDPE, MDPE
Screw diameter: 120 mm
Output: Up to 800 kg/h, depending on the type of material and feeding rate.
Screen changer: 4 pistons screen changer
Pressure sensor: Yes
Conveyor belt: Yes
Degassing: Double degassing
Power: Voltage: 3 x 400V + N + Pe
Further information:
Extruder motor: 200 kW
Cutter-compactor motor: 160 kW

Attachments & Accessories:
Conveyor belt
Metal detector
Hot granulation Die face cutter
Cutter-compactor/Agglomerator
Water bath
Centrifuge
Extraction blower
Cyclone

In good working condition.
Can be seen in production.

We can assist you with dismantling, loading and transport.
2006
Price  
  DK   request
74360691 505

ROEDIGER ANLAGENBAU HANAU Tt 90/9 A G for sale
Sewage sludge drying plant


Sludge drying plant Rad engineering / Hanau Functional, the facility has been decommissioned, and is located in built-in condition. The listed positions include the supply and need of the buyer dismantled, loaded and be ...

 
Sludge drying plant
Rad engineering / Hanau

Functional, the facility has been decommissioned,
and is located in built-in condition. The listed positions
include the supply and need of the buyer dismantled, loaded and be transported.
The technical documentation is available.
A PC is supplied machine with control software of the system.
The price is net, plus 19% VAT.
Price on request!
Item location is 73066 Uhingen.
Visit at any time by prior arrangement possible
and desired. Please contact us.

This offer includes the following positions:

Drying drum:
Manufacturer: Allgaier Uhingen. type: TT 90/9 D T p A G
Diameter drum: 1585 mm
Length: 9000 mm
Thickness: 10 mm mat: stainless steel

Design data:
Material: Sewage sludge
Task humidity: 35%
Final moisture content: 10%
Quantity: 3, 6to/h drive:
Bauer slip-on gear motor
Type: AG 103-13/D4 A4 381
7.5 kW/8400 nm 380/600V 50 Hz IP 65 wet goods bunker:
Manufacturer: SHW Wasseralfingen volume: ca. 14 m³
Silo diameter 3 m
Height: 2 m
Fixtures: Bunker discharge system manufacturer: SHW double shaft mixer: manufacturer: RAD Anlagenbau Hanau
Name: double shaft paddle mixers
Type: RMI 315
Capacity: 4500 kg / h
Length incl. motor: 5200 mm
Width: 720mm
Height ges. 675 mm
Empty Court: 600 kg
Engine power: 7,5 kW

Single feed screw (feeding drum)
Manufacturer: RAD Anlagenbau Hanau name: pipe screw conveyors
Type: RS 320
Capacity: 4500 kg / h
Length: approx. 2000 mm
Diameter: 320 mm power: 3,0 kW circulating good bunker:
Manufacturer: Rödiger Hanau
Volume: approx. 8 m ³
Mat: St 37 length: 3500 mm
Wide down / up: 600mm / 2200 mm height: 2500 mm
Trough screw conveyors
Manufacturer: Rödiger Hanau
Type: TS 250
Material: Stainless steel
Capacity: 3000 kg / h
Length: 5300 mm
Engine power: 3.5 kW
Trough screw conveyor:
Manufacturer: Rödiger Hanau
Machine designation: Trough screw conveyors with central storage
Type: TS 250
Material: galvanized
Length 7700 mm
Engine power: 2,2 kW

Trough screw conveyor:
Manufacturer: Rödiger Hanau
Type: TS 200
Material: Stainless steel
Bandwidth:
Length 3500 mm incl. motor
Motor power: 1,5 kW

Trough screw conveyor manufacturer: SHW Wasseralfingen type: DV 112 M4
Material: Stainless steel
Motor: 4 kW

Dry product silo:
Manufacturer: SHW Wasseralfingen
Volume: 25 m³
Material: ST 37

Hydraulic unit:
Manufacturer: Herion
Type: 250-18,5-45-10

Slurry pump:
Manufacturer: Netsch
Type: 2NEA SP 80A
Engine power: 11 kW

Dust filter
Manufacturer Infastaub
Type. AJN 2/453 SL
Filter type: AJM 006,V 30/2 no cages for filter more available


 
Price  
  DE   request
72026120 302

BAUSANO MD 90/36 for sale
Double screw-type extruding machine


BAUSANO TWIN SCREW EXTRUDER MOD. MD90/36 PLUS counter-rotating screws 2 x 90 mm 36 L/D Construction year 2008 screen changer BD Plast die PREALPINA PELLETIZER (year 1984) 18,000 worked hours
used machine
 
BAUSANO TWIN SCREW EXTRUDER
MOD. MD90/36 PLUS
counter-rotating screws 2 x 90 mm 36 L/D
Construction year 2008
screen changer
BD Plast die
PREALPINA PELLETIZER (year 1984)
18,000 worked hours
2008
Price  
  IT   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country