doosan d used for sale

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: SEM, DC gear motor -Type: DPM30E4 -Voltage: 36 V -Speed: 70 rpm -technical data: see photo type plate -Shaft: Ø 30 x 50 mm -Dimensions: 430/150/H130mm -Weight: 14.3 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, crane remote control with cable -Cable length: 5.85 m -Connector: 24-pin -Dimensions: 850/400/H150 mm -Weight: 10.5 kg

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Speed: 146 -Voltage: 160 V -Power: 300 W / 3000 rpm -technical data: see photo type plate -Shaft: Ø 16 x 27 mm -Dimensions: 320/120/H155mm -Weight: 10 kg

one used offset printing machine Heidelberg GTO 52 2 Year of manufacture 1997 Format 36x52cm DDS dampening system

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Dierking, DC gear motor type SO GP 86-2L -Voltage: 160 V -Power: 300 watts -Speed: 3000/146 rpm / i = 20.5 : 1 -Shaft: Ø 16 x 30 mm -Dimensions: 320/160/H150 mm -Weight: 10.1 kg

Powerful vacuum cleaner for dust, smoke, chips Suction power 7.58 m³ / min Vacuum 520 mbar Air requirement 3.25 m³ / min Suction nozzle NW 76 mm Suction hose 5.5 m Collection tank 60 litres HEPA Safety Filter Cartridge 2.2m² - Dust Class H Space requirement L - 1,100 x W - 680 x H - 2,200 mm Weight approx. 130 kg

Contactor, semiconductor contactor, contactor, power contactor, time relay, safety time relay, safety control, motor contactor, auxiliary contactor, multi-function time relay -Manufacturer: Tele, multifunction time relay -Type: D6DM -Quantity: 1 piece Reiais available -Dimensions: 75/25/65 mm -Weight: 0.1 kg

There is a used, refurbished Diosna spiral mixer SP 120 D (for max. 120kg dough / 75kg flour) for sale. The spiral mixer is in very good condition and runs quietly. The machine has a stainless steel boiler, a stainless steel spiral, is mobile, has 2 timers and 2 speeds. A video can be sent on request. Price on request.

Inv. Num. : 5211 Type: DMU 80 P Producer: Deckel Maho Generated: 2000 Parameters: Control system: Heidenhein TNC 430 Switch-on hours: 87285 h Hours: 34100 h Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Cone: ISO 40 Number of all tools: 30 pieces Equipment: IKZ Workpiece Probe Conveyor Spindle cooling 2020: Replacement of the PILS contactors New E/R module New X/Y Module 2019: Lock Replacement Workpiece Probe Sensor Replacement Replacing the hydraulic hose of the tool clamp 2018: New X/Y axle bolt Replacement of the Y-axis blind Replacement of the B-axis planetary gearbox New motor and B-axis measuring cable 2016: New spindle bearings System Replacement Replacing the UV105 power supply Replacement of the spindle mod ...

Directivity: 100 t Projection: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pushrod speed upwards: 206 mm/s Slide speed downwards: 68 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 3500 x 1650 x 2760 mm Weight: 5500 kg

Gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Eberhard Bauer, gear motor -Type: D1A41AHZ/253 -Speed: 137 rpm -Power: 2.2 kW / 1420 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 630/270/H220mm -Weight: 51 kg

Bezel, steady rest, lynette -Bezel: max. opening Ø 128 mm -Centre height: 200 mm -technical drawing: in the photos -Total dimensions: 650/80/H420 mm -Weight: 28 kg

Boiler lifting tipper Diosna HK 170 Bj: 2010 in used lifting tipper Diosna HK 170 is currently for sale. This machine is immediately available in our warehouse in Bielefeld. -Mobile on castors -380 volt plug -Tipping height approx. 120cm -Total height approx.: 155cm -External dimensions approx: 162cm deep and 120cm wide

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holder: SK40 holder -Inner diameter 57.5 mm -Dimensions: Ø 76 x 157 mm -Weight: 1.8 kg

Distance between points: 500 mm, Height of points: 100 mm, Ø of the grinding wheel: 300 mm, Normal grinding wheel width: 25 mm, Maximum usable width of the grinding wheel: 50 mm, Grinding wheel hole: 127 mm, Workpiece holder head: 75-110-150-220-275-375-550-750 rpm, Tilt table in degrees: 8º, Hydraulic table speed: 0.10/6 m/min, Automatic fast forward: 20 mm, Advance in depth: 0.10 to 1 mm, Plongee feed rate: 0.10-5 mm/min, Fine-tuning time regulation in seconds: 60s, Workpiece holder head motor: 2 speeds: 0.38/0.55 HP, Motor head for grinding wheels: 3 CV, Hydraulic pump motor: 0.5 HP, Cooling pump motor: 0.10 HP, Internal grinding apparatus: 0.75 HP, Points: Morse 4 and 3, Weight approx.: 1600 Kg

Signal columns, signal lights, signal lamp, control light, signal light column, light signal alarm system -Manufacturer: Deckma, signal light -Signal lights: 8 pcs, see photos -Signal horn: 2 tones -Dimensions: 450/290/H740 mm -Weight: 8.6 kg

weight max.: 250 kg throat: 2.500 mm weight of the machine ca.: t height: 3000 mm Column-mounted slewing jib crane from DEMAG Load capacity 250kg Outreach: 2,500 mm Floor operation Console fixing plate 600 x 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safeline Metal detector checkweigher Stainless, overall belt dimensions 1600mm x 330mm, aperture 450mm L x 225mm W, AIC checkweigher 250g -3500Kgs, mobile, 1Ph

geared motor -Speed: 19.5 rpm -Power: 0.37 kW -Brake: 24 V -Design: B5 -Shaft: Ø 30 x 60 mm -Protection class: IP 65 -Quantity: 4 available -Price: per piece -Dimensions: 665/200/H250 mm

Geared motor, spur geared motor -Power: 0.25 kW -Speed: 43 rpm -Shaft: Ø 20 mm -Design: B14 -Protection rating: IP65 -Quantity: 1 available -Dimensions: 458/133/H215 mm -Weight: 17.7 kg

A used Kessel lifting tipper Diosna HK 224 is currently for sale. This lifting tipper is immediately available in our warehouse in Bielefeld. Boiler lifting tipper Diosna HK 224 - Boiler lifting tipper for Diosna spiral mixer SP 120 and SP 160 boiler - Dumping height approx. 200cm - Total height height approx. 295cm - Lifting tipper is mobile on castors - 380 Volt 50Hz

Tool holder, milling holder, milling tool -Manufacturer: Dornag Swiss, milling chuck SK40 -Inner diameter: Ø 25 mm -Dimensions: Ø 65 x 175 mm -Weight: 2.1 kg

Sealing insert, Seal -Manufacturer: DOYMA, Curaflex sealing insert A unused Ovp -Type: A DPS DN 150, for 86.0 - 94.0 GGV / EPDM -Article No.: 101009015000 -Nominal diameter: DN 150 for 86 - 94 mm -Quantity: 1x insert available -Dimensions: Ø 150 x 44 mm -Weight: 1.3 kg

sheet width: 1550 mm plate length: 2525 mm plate thickness: 6,4 mm Punching capacity: 200 kN speed of positioning X: 50 m/min speed of positioning Y: 50 m/mih no. of strokes: 200 / 400 Hub/min control: MNC 32000 ATC: 22 Pos total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Manufacturer: Smith Detection - Type: Pack430 - Voltage: 230 VAC 1Ph - Amperage: 16 amps - Frequency: 50/60 Hz - Fuse: 20Amp - SCCR: 5000A - Year of construction 05- 2008

Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3.24 m -Weight: 2.5kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water-cooled -Length: 4.0 m -Quantity: 1x hose package available -Weight: 3.2 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 3,2 m -Weight: 2,7 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 5,3 m -Weight: 4,0 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: Dress, saw blade HW -Type: Ø 420x4.0/3.2x30 Z96 TFP -Art. No.: 342031 -Speed: n max. 4500 rpm -Number: 4x saw blade available -Price: per piece -Dimensions box: / 430/430/H10 mm / / 430/430/H10 mm -Weight: 3.6 kg/piece

Controller, programmer, program controller -Manufacturer: SBF, converter dimmer with button connection with base plate -Dimmer: Type PWM -Voltage: In: 24V DC 17-32V -Number: 9x controllers available -Price: per piece -Dimensions: 120/80/H40 mm -Weight: 0.1 kg/pc.

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: SEW Vector, spur gear motor -Speed: 27 rpm -Engine: Type DFV 132M-4 -Power: 7.5 kW -Shaft: Ø 50 x 100 mm -Protection class: IP54 -Dimensions: 800/300/H39 5mm -Weight: 113 kg

MIG/MAG hose package extension, intermediate hose package -Welding cable: extension / connection cable water-cooled -Length: 4.35 m -Version: Dinse plug, gas hose, control cable -Connector: 4-pin -Transport dimensions: 470/460/H100 mm -Weight: 6.0 kg

DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)

COOLANT UNIT for DMU 160P. General Aspects COOLANT TANK CAPACITY (L): 1.300 FILTER CAPACITY (L/MIN): 600 MOTOR: MOTOVARIO SW040 T 100 POWER (KW): 0,12

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/400/H110 mm -Weight: 3.5 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/440/H80 mm -Weight: 3.3 kg

Geared motor, electric motor, electric geared motor -Condition: Geared motor is unused -Speed: 59 rpm -Power: 22.0 kW -Design: B3 -Protection rating: IP55 -Shaft: Ø 70 x 140 mm -Dimensions: 1100/400/H435 mm -Weight: 336 kg

Key data: 600 mm, 525 mm, 200 mm

Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial no.023 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial.no.063 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 710 mm, 520 mm, 520 mm

TECHNICAL DETAILS X-axis travel:710 mm Y-axis travel:520 mm Z-axis travel:520 mm Rapid traverse X-axis:30 m/min Y-axis rapid traverse:30 m/min Rapid traverse Z-axis:30 m/min X-axis feed speed:10 m/min Y-axis feed speed:10 m/min Z-axis feed speed:10 m/min Overall height:3,300 mm Overall length:4,600 mm Overall width:5,500 mm Total weight:6,000 kg Spindle speed (min.):20 rpm Spindle speed (max.):12,000 rpm Spindle motor power:25,000 W Input voltage:400 V Type of input current:three-phase Work table length:700 mm Worktable width:500 mm

x-travel: 1250 mm y-travel: 600 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 210 mm : total power requirement: kW weight of the machine ca.: 0.085 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling head, milling chuck, milling extension, angle milling head -Manufacturer: Deckel, milling head from milling machine FP4L -Mounting: SK40 -Milling head: swiveling -Tool clamp: electric motor -Individual components: see photos -Transport dimensions: 1690/360/H745 mm -Weight: 548 kg

Control panel, operating unit, control board, operating panel, operating unit, keyboard, CNC control -Manufacturer: Deckel, control unit from milling machine Deckel FP4L -Transport dimensions: 1200/800/H220 mm -Weight: 33 kg

Fan, ventilator, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, duct fan -Manufacturer: Sunon, axial fan type DP209WR -Voltage: 220/240 VAC -Number: 1x fan available -Dimensions: 120/120/H40 mm -Weight: 0.5 kg

Thermal system, fan heater, heating elements -Manufacturer: Ziehl-Abegg, axial fan, axial fan, heating fan -Axial fan: type DADL 350/6 -Power: kW -Dimensions: Ø 470 x 245 mm -Weight: 9.1 kg

x-travel: 750 mm y-travel: 650 mm z-travel: 650 mm total power requirement: kW weight of the machine ca.: 12 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.