doimak used for sale

Key data: 600 mm, 200 mm

We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Double-sided planer copper mill DOIN- VUIN 605 year of construction 1975 S/N 3310 Manufacturer Kupfermühle woodworking machines Working width / maximum width 600 mm Working thickness: 200 mm chip removal max 20mm ( upper shaft ) chip removal 12mm ( under shaft ) Shortest piece length 350mm Technical equipment: from above: toothed draw shaft Toothed Pull Shaft 2 PCs 4-blade planner shaft, 605 mm, 15 kW from below: Table top, adjustable Traction shaft, smooth-running, adjustable 4-blade planner shaft, 600 mm, 11 kW 2 adjustable tables/pull roller in the lower table top Electric height adjustment Lift motor a ...

Single sided postforming line, capable of doing L - and U profiles, with or without insert. Workpiece thickness: 16 to 60 mm. Min. workpiece width: 150 mm. Workpiece overhang: 70 mm. Max. laminate overhang: 105 mm. Feed speed 3 - 18 m/min. Fence side at the left Equipment: Squaring and shaping part: 1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate 1 x scoring, motor 1 kW, top position 1 x milling unit for the laminate when doing U profiles 1 x laminate support Postforming part 1 x blow cleaning nozzle 6 x glue nozzle for the glue application 2 x glue roller 9 x IR heating, each 2,2 kW 2 x Hot air blower, each 10 kW 1 x Basic postforming pressure zone for L-profiles, using rollers 1 x Basic postforming pressure zone for U-profiles, using rollers 1 x VF postforming pressure zone for special profiles, using pressur ...

Cut-to length slitting machine SM-1250х8 Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. This cut-to-length slitting machine lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are four types of the sheet metal cut-to-length machines we make: The manual cut-to-length slitting machine (cutting for 2 strips) The electric cut-to-length slitting machine (cutting for 3-4 strips) The electric cut-to-length slitting machine (cutting for 6-10 strips) The electric cut-to-length slitting machine (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special scr ...

Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at th ...

Fixed heavy-duty shelf Do you need help with the creation of your warehouse? We are happy to advise you - in doing so, we draw on our many years of experience. You want a different composition of the shelves, no problem! We have our own large warehouse. We help you from planning to assembly to acceptance Everything from a single source. Scope of delivery 10 x Shelf stand Abm. approx. 480x110x10cm 01 x Shelf stand Abm. about 450x110x10cm 01 x Shelf stand Abm. about 350x110x10cm 32 x Traverse Color: blue 270x14x6cm Images may vary. Matching shelf gratings - new and used - can be found in our shop! International shipping costs on request!

fully automated DC-646 Slitter/Cutter/Creaser is Duplo's mid-range solution. With its ability to slit/cut/crease, perforate, and fold digitally-printed applications in one pass, the DC-646 delivers professionally-finished jobs up to 30 sheets per minute. Cut job costs by doing away with time-consuming set ups and make-ready times. Finish jobs in quick turnarounds. Incredibly efficient and easy to use, the DC-646 produces a wide range of full-bleed applications from 24-up business cards to invitations and tickets on demand. Features Automated job set up and changeovers Lightweight paper crease module to process thinner stock Integrates with Fiery Impose to automate job preparation Perforating and in-line folding options for additional finishing

Special attachment for lathes gt; for reworking crankshafts - this attachment can be fixed on top of the cross-slide - via a pneumatic cylinder the top part of the attachment can tilt op to allow the crankshaft to be installed in the chuck - once the crankshaft has been installed in the chuck of the lathe the top part can be closed and positioned around the area that needs to be reworked - once activated the tool insert of the attachment will start turning around the crankshaft to remove excess material. The chuck does not have to turn the crankshaft! The advantage of this concept is that the tool moves around the crankshaft - by doing this the least amount of stress is put on the crankshaft. This in contrast to the classic setup where the stationary tool is pressed into a workpiece being turned by the chuck of the lathe. Max dia of crankshaft: 330 mm

Here Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide it will have no consequences. This only applies unless otherwise specified in the subsequent processing operations. Controller pursuant to Article 4 No. 7 GDPR and Data Protection Officer: The person responsible for the processing of your data is: VOSS GmbH & Co. KG Ohrstedt-Bhf. North 5 25885 Wester-Ohrstedt Germany Phone: 04847 8068-0  ...

DAMET MP 15 - 18 Pneumatic Hand Staplers / Carton Staplers / Box Staplers are hereby offered for sale. Each item works flawlessly and has been regularly serviced. -Booklet Type: 35/15; 35/18 -Magazine capacity: 100pcs. -Operating pressure: 5 - 7 bar -Power: 2 connections/sec. -Air pressure: 0.067 m3/min -Drive: manual -Weight: 1.59kg - Dimensions (L x W x H): 300 x 100 x 200mm Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to pr ...

DAMET DS-3519-E Compressed Air - Carton Lid Stapler is hereby offered for sale. The items work perfectly and have been regularly maintained. -Tool Type: Pneumatic -Magazine capacity: 100 -Working pressure: 4.9 - 7.1 bar / 71 - 103 PSI -Air consumption: 1.13 liters per shot at 5.6 bar -Compressed Air Connection Thread Type: 1/4 BSP -Dimensions (L x W x H): 345 x 115 x 233mm -Weight: 2.45kg - Diameter: Min. 0.8mm / Max. 2.25mm -Length: Min. 15mm / Max. 19mm -for the following staples: 35 / JK560 / Prebena B / BeA Packfix A / Senco XB Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise st ...

8,10,11 and 12 Fold Gears In perfect condition condition Can be seen in production in working condition For sale as we stopped doing continuous form and Z-fold work

Red transport crates are hereby offered for sale. These are made of plastic and have the following dimensions: ( LxWxH ) 60 x 40 x30cm If necessary, the boxes are also available several times. Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide it will have no consequences. This only applies unless otherwise specified in the subsequent processing operations. Controller pursuant to Article 4 No.  ...

Cold vacuum glass sealing machine, make Coudert Massiservices, type Minic Plus, year 2013, The packaging is transported on a conveyor belt via an infeed screw into a transfer star, transported. By rotating the star counter-clockwise, the, Packaging passed through the closure gripping station, the closure is placed on the packaging, set and both are transported to the sealing station., As the first phase of the bolting process, a bell is placed over the upper part of the packaging, in the second phase one encloses, semi-inflatable membrane the edge of the lid and in the third phase is created by a negative, pressure difference a vacuum in the package, in the fourth stage the lid is tightly screwed,, the membrane detaches, the bell rises and the sealed package is released from the, Sealing machine transported out., The machine works with 4 capping heads, which close one after the other in  ...

Vertical panel saw Brand: Putsch Type: SVP 950 M New machine Description: The SVP 950 M is a vertical saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and it has a working table for the workpieces which consists of aluminium fences with plastic inserts. To prevent a contact with the saw blade while doing horizontal cuts, the frame is equipped with an automatic moving support. The lower workpiece supports consist of aluminium and have lowerable transport rolls. The saw beam and the saw unit can be adjusted and moved manually. Therefore the saw beam can be fixed at 6 vertical sawing positions. The simple shift of the saw head is possible because of an ergocnomical formed handle. Standard equipment: - Electric driven, automatic moving support - Swivable central support for small workpieces (length approx. 4680 mm) - 4 gr ...