dmt used for sale

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Permanent Magnet Main Drive Motor, DC Motor, Asynchronous Main Drive Motor, Spindle Motor -Manufacturer: Indramat, servo motor from cycle lathe DMT CD320 -Type: MACO71C-0-US-2-C/095-A-/S001 -Part No.: 228353 -Speed: 2000 rpm -Shaft: Ø 19 x 37 mm -Dimensions: 390/115/H170 mm -Weight: 11.9 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Permanent Magnet Main Drive Motor, DC Motor, Asynchronous Main Drive Motor, Spindle Motor -Manufacturer: Indramat, servo motor from cycle lathe DMT CD320 -Type: 2AD100D-B05A1-AS03-B2N2 -Power: 7.5 kW -Speed: 1500 / 9000 rpm -Shaft: Ø 43 x 73 mm -Dimensions: 810/210/H260 mm -Weight: 76 kg

Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil in-line pump -Manufacturer: Kopa, OIL central lubrication pump oil inlet pump from lathe DMT CD320 -Type: 010 Single Line Delta -Container contents: l -Flow rate: l/min / bar -Dimensions: 210/135/H275 mm -Weight: 6 kg

CNC control, control panel, machining center -Manufacturer: DMT, control panel/CNC control with limit switch from CD320 cycle lathe -Monitor: Asus -Dimensions: 620/120/H370 mm -Weight: 50 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device, power supply, AC main spindle drive, spindle controller -Indramat: AC main spindle drive from DMT CD320 cycle lathe -Type: TDA1.3-100-3 API -Item: 244599 K41/96 -Dimension: 325/150/H390 mm -Weight: 10.8 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device, power supply -Indramat: AC Servo Power Supply from cycle lathe DMT CD320 -Type: TVD 1.2-15-03 -Item: 246504 K49/96 -Dimension: 325/150/H390 mm -Weight: 15.5 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device -Indramat: AC Servo Line Former from DMT CD320 cycle lathe -Type: NAM 1.2-15 -Item: 246506 K39/96 -Dimension: 325/105/H390 mm -Weight: 21 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from DMT CD320 cycle lathe -Type: MOD13/1X0314-028 -Contr: TD M3..-020-300-WO -Dimension: 330/70/H390 mm -Weight: 6.4 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from DMT CD320 cycle lathe -Type: MOD13/1X0296-029 -Contr: TD M3..-020-300-WO -Dimension: 330/70/H390 mm -Weight: 6.4 kg

CNC control, control panel, machining center -Manufacturer: DMT, control panel/CNC control with limit switch from CD320 cycle lathe -Limit switch: Balluf BNS 519 -Dimensions: 500/500/H210 mm -Weight: 11.4 kg

Power supply, DIN rail -Manufacturer: Schneider, power supply from lathe DMT CD 480 / CD 320 -Type: NGDA 2415-920132T4 -Power: 360W -Input: 3 x 400V -Secondary: DC 24V -Quantity: 2x power supply available -Price per piece -Dimensions: 185/115/H140 mm -Weight: 6.2 kg/pc.

Key data: 250 mm, 1750 mm

CNC Lathe/Cycle Lathe DMT Core CD480 Control Heidenhain Manual plus 620 HSCI Year of construction 2014 Machine no. 3204.14 Circulation diameter over bed 475mm Circulation diameter over face carriage 260mm Center Distance 2000mm Turning length 1750mm Spindle head DIN55026 size A6 Spindle diameter at front bearing 115mm Spindle bore 82mm Spindle speed 1-3000 rpm Tailstock MK5 Quill travel 120mm Quill diameter 70mm Accessories/Equipment: -Conveyor - Rinsing gun - Levelling elements for machine installation - Schunk wedge bar chuck ROTA-G D250mm incl. clamping jaws - Axial stop in the main spindle - Tailstock roller guide - 12x disc turret VDI30 (DIN69880) - Multifix B additionally mounted at the front - Coolant device -Documentation The machine was in use until the very end and is fully functional and in very good condition. Price net p ...

Article: Hand-, Cycle- and CNC-Lathe Manufacturer: DMT Kern Type: CD480 Control: Haidenhain Year of construction: 2000 Machine has processed plastic Lead screw and/or lock case must be overhauled Sale without tool holder! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Description: Circulation diameter over bed 320mm Circulation turning diameter over recess 380mm Circulation turning diameter over cross slide 150 mm centre width 750 millimeters Quill diameter 60mm Internal taper MK4 Control Heidenhain manual plus With additional workshop cabinet contents:  ,steel holder, jaws to chuck weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 2,800 x 1,900 mm

turning diameter:800 mm turning length:3838 mm control:Fagor 8055i max. swing over slide:490 mm bed width:550 mm turning speeds:40-1000 U/min spindle taper:C11 spindle bore:100 mm transmission ratio:4 Stk. tailstock quill diameter:100 mm tailstock quill stroke:240 mm taper of tailstock quill:6 MK :4000 mm x-travel:420 mm z travel:3835 mm chucking diameter:400 mm spindle cone:1:20 rapid traverse x/z:4/8 m/min power requirement:11 (15/30min) kW weight of the machine ca.:6600 kg dimensions of the machine ca.:6310/2000/1800 mm +SPECIAL PRICE+SPECIAL OFFER+ main features: -high speed -high spindle torque -big spindle bore -automatic forced lubrication -hardened and ground guideways -brand-new design eterior -CE certificate of TÜV Rheinland, Germany & ISO 9001 CQC, China All machines' functionalities will be checked and controlled before loading. The machines can be modified according to CE u ...

turning diameter:650 mm turning length:2000 mm face slide travel:445 mm turning diameter over slide:260 mm turning speeds:1-2.000 1/min transmission ratio:2 spindle:33 / 22 kW spindle bore:130 mm quill stroke:200 mm turret head:12 Pos. workpiece weight max.:2.560 kg total power requirement:38 kW weight of the machine ca.:6 t dimensions of the machine ca.:5 x 2,6 x 1,9 m teach in lathe, SAUTER-turret with 12 pos. (6 for live tools), VDI 40, SMW 3-jaw-chuck dia 400mm, tailstock, steady 100-250mm, C-axis, chipconveyor, free contour-programming, memory 256kB, accessories no hour meter, max. 1 shift

turning diameter:1000 / 700 mm turning length:3000 mm face slide travel:600 mm turning diameter over slide:700 mm turning speeds:1-1.800 1/min transmission ratio:2 spindle:46 (60%) kW spindle bore:132 mm quill stroke:280 mm workpiece weight max.:2.560 kg total power requirement:38 kW weight of the machine ca.:6 t dimensions of the machine ca.:5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 power chuck, tailstock, chipconveyor

Push-button detectors, detectors, fire alarms, fire detectors RFT DMT 64 ( DMT64 ) Fabrication number: 952 Umax: 15 V AC/DC Imax: 0.16 A IP54 Plastic housing New ! Dimensions: 130 x 130 x 65 mm

Manufacturer: Scheppach, Type: DMT 8108, Peak width in mm: ca.1000 mm, Peak height in mm: ca.150, FREE TEXT: kw Leistung 0,75/6 Geschwindigkeiten 370/600/1000/1700/2700<CRLF>,

Key data: 650 mm, 3000 mm

Kern CD 650 DMT / Cycle Lathe Year of construction 2008, Control Siemens 840 D, Travel X/Z 450/3,000 mm, Tool carrier Multifix, Turning length 3,000 mm, Spindle bore 103 mm, Three-jaw lining, Tailstock Conveyor coolant system, Connected load 48 KW,

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: AC Servo Power Supply -Type: TVD 1.2-08-03 -Component: from a DMT CD 480 lathe -Dimensions: 320/150/H390 mm -Weight: 15.6 kg

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: AC Servo Line Former NAM 1.2-08 -Component: from a DMT CD 480 lathe -Dimensions: 320/105/H390 mm -Weight: 12.9 kg

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: AC Servo Controller MOD13/1X0021-008 -Contr: TD M3 ..- 020-300-WO -Component: from a DMT CD 480 lathe -Dimensions: 320/70/H390 mm -Weight: 6.5 kg

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: AC Servo Controller MOD13/1X0331-486 -Contr: TD M3 ..- 020-300-WO -Component: from a DMT CD 480 lathe -Dimensions: 320/70/H390 mm -Weight: 6.5 kg

Kellenberger: 1000 U 125 Machine was totally dismantled and rebuilt from the ground up. All sheet metal and aluminum parts are laminated. Work piece headstock newly stored. Completely overhauled hydraulic, All filter replaced.

GABO EPLEXOR® Bench Test Machine Here we offer you a GABO EPLEXOR® bench test machine. GABO EPLEXOR® 500 N Spectroscope 500 N / 1500 N static Dynamic Mechanical Analysis (DMA) EPLEXOR® Measurement of viscoelastic material properties in Dependence of temperature, frequency and mechanical stress EPLEXOR Series Test Systems® enable the mechanical characterization of a wide range of different materials: from elastomers and polymers, to Composites, metals, glasses, ceramic materials, Biomaterials and food, up to adhesives, plastic Masses and liquids. Areas of application are: DMTS/DMTA/DMA Analysis of viscoelastic material properties dynamic material testing dynamic fatigue testing Dynamic component testing Rheology The Method of Dynamic Mechanical Spectroscopy (DMTS/ DMTA or DMA) uses forced, mechanical vibrations for the deformation of the test specimens. The samp ...

Kellenberger Univesalrundschleifmaschine 600 U 125. The machine is in a very good condition, used in addition to several CNC-universal cylindrical grinding machines only for making parts. The term is very low according to the age. Special accessories on request both new as well as offered in the used condition. Machine has a paper band filter. Internal grinding spindles, grinding wheel flanges, clamping device, grinding wheels, etc. on request. If necessary one can be mounted digital display two axes. Display accuracy: o, òó1 and 0.002 mm.

Separating hunters circular saws - machine with workpiece feed device. Machine is fully functional. Saw blade diameter 360 mm Workpiece dimensions 200 x 90 mm flat material Cutting speed 3000 rpm. Voltage: 3 x 380 V 50 Hz Control voltage: 220 V Performance: 11 15 a Machine number: 606 Wiring diagram number: 23.04.052

We give our wheel bearing. Vitrified bonded grinding wheels for metal processing. From 100 mm to 600 mm in diameter. We carry also diamond and CBN wheels for tool grinding machines new and used. Strausak Fleximat 91 we have yet complete disc sets for all common diameters for the machining of solid carbide and HSS milling and drilling tools. Price and info. on request.

We give our wheel bearing. Ceramic grinding wheels of different binding and hardness. Dimensions von75 mm to 600 mm. The discs are new, unused, and undamaged. Retail possible, price on request.

HF FeinfräÃ? &amp; - grinding spindle, manufacturer Fischer Schaffhausen. Designation; MFVS 830, Series number: EL-S-007 The spindle is undamaged, unused and in their original packaging. The spindle can be used with electrodes and-precision Strausak type. 82 CNC. or as RF - internal grinding spindle. Tech. Data.: 220 V 600 HZ 4-pin 2.5 KVA 1.4 KW / 600 HZ for further information: The grinding technology: Tool &amp;-profile grinding coarser has in 2001 of the production &amp; - Strausak license rights wage purchased. The rights include the complete series 57 U/W, 57 U CNC, 57 W CNC 3.-4.u-5-axis, and from this all developed machines.

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

We offer a new Movomatic Tischlängspositionier Setup. The device is new, unused and undamaged. The device is longer years in our camp, we have never used this. It is also can be used with security at other cylindrical grinders manufacturers.

Complete wheel sets for the production and subsequent sharpening of HSS and carbide tools. Single diamond and CBN discs. for the manufacturing and Resharpening. Grinding wheel shots short and long run. Spacer discs for grinding wheel flanges.

Long-Range Distance Sensor SICK DMT10-2-1113 Article number: 1027605 Measuring range: 0.5 - 20 m Supply voltage: 18 - 30 V DC, 6 W IP 65 approx. 3.5 m connection cable used, tested ! Dimensions ( without cable ): 200 x 100 x 100 mm