130,789 used machines on RESALE, but how to find them? Machine Search
Roll wrapping roller Sinmag Model: Piccolo Dough insert approx.: 20 to 80 grams ( depending on TA ) Output max. 2000 pieces/hour Table-top, stainless steel design Long roll width max. 180 mm Connection 230V Dimensions: 280 x 475 x 280 mm, WxDxH New machine 24 months warranty Many more TOP bakery machines in stock!
Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.
Signal pillars, signal lights, signal lamp, control lamp -Manufacturer: Patlite -Type: LU7-02FB -Number: 3x columns available -Price: per piece -Dimensions: 70 x 190 mm -Weight: 0.3 kg
Model: Trak DPM 750 Type: AEVF Serial No.: 513352 Controls: Proto Trak MX3, switchable to MX2 Travel: X, Y, Z 750 x 400 x 610 mm Table size: 1270 x 320 mm Weight: 1900 kg Year of construction: 1995 Country of origin: Taiwan
Series No.: 12661418 Year of construction: 10/1998 rpm: 65 – 2000 Cone: MK3 Country of origin: Taiwan
Motor roller, drum motor belt sander belt sander -Spare part for a grinding machine -Drum: Ø 150 mm -Drum length: 170 mm -Speed: 2900 rpm -Power: 1.75 kW -Shaft mount: Ø mm -Number: 2x motors available -Price: per piece -other sizes also available in stock -Weight: 19.5 kg
Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 1x motors available -Price: per piece -Dimensions: 130/185 mm -Weight: 7 kg/piece
Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from the company GSL (German Standard Lift) -Drive shaft: Ø 20 mm -universally applicable -Number: 20 motors available -Price: per piece -Dimensions: 245/125 mm -Weight: 14 kg/piece
-Dough divider weigher Manufacturer: Werner & Pfleiderer Haton BV -Type: Parta SN -400 volts -Year of construction 2001
Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from the company GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed - universally applicable -Number: 5x motors available -Price: per piece -Dimensions: 240/175 mm -Weight: 14 kg/piece
The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -PVC coated -Length: approx. 50 m -other crane ropes are also available -Weight: 6 kg
used
For sale: Tetra Pak Accumulator Helix : ACHX-070V Left 100m Year: 2016
for sale: elements of Tetra Pak conveyors: We will send a list of items and photos at the customer's request.
Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Type: PEV-1/4-B-M12 -Weight: 0.2 kg
Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Type: PEV-1/4-B-OD -1x magnet included -Price: per piece -Weight: 0.2 kg
6 feeder, type 370, 8 stations chain, type 370, 4 double universal bases, 1 cover feeder, type 1529, stitching unit, type 390, stitching control, 2 stitching heads, type HK 75, three knife trimmer, Type 361
Good day I have a Top Teca Print machine with automatic pad cleaning here! Absolute professional machine. If you have any questions, just send us an email!
Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T
Heating hose, adhesive melter, gluing machine, hot glue machine, industrial hot glue gun -Condition: unused -Type: FE-H/PN2-1.8-13-PT100 -Connection: 230 V 50 Hz 320 W -Heating capacity: 200 °C -Total length: 2000 mm -Weight: 3 kg
Machine type: Spiral conveyor incl. roll embossing machine Manufacturer: Püschel Year of construction: unbek. Condition: used / untested Offer will only be sent if a complete imprint is provided! Price 950 Euro incl. 19% VAT free loaded. Location Warstein , Germany Reference M-PÜS-0124 DESCRIPTION We offer you a used spiral conveyor including roll embossing machine from the manufacturer Püschel. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!
Casing-in machine Make Schmedt Model Präleg HHS1801 Year 1998 Minimum size 80 x 110 x 2 mm Maximum Size 340 x 320 x 80 Speed up to 200 cycles per hour Available direct
Flange bearing 4-hole -Bore: 35mm -Outside: Ø 135 mm -Price: per piece -Quantity: 1x available -Weight: 1.2 kg
SCH 4532M Machine Incl packaging film New from 2021 Machine refurbished by the manufacturer
Vibration warning signal -Type: PA 100 -Quantity: 6 pieces -Price: per piece -Weight: 0.2 kg/piece
PackLab WING REPC FWB60 self-adhesive labelling machine for front & back labelling for cylindrical, oval or rectangular shaped bottles, etc., 2 label applicator type M60 DX 250, label speed 60 m/min., outer diameter of the label reel max. 400 mm, core diameter of the label reel 45-75 mm, label carrier tape with a maximun height of 250 mm, label width from 15 up to 480 mm, maximum label height approx. 245 mm, conveyor width 80 mm, top stabelising belt, press-on belt with a height of approx. 110 mm, electrics 400V/50Hz/3PH, machine floor space approx. 4140 x 3000 mm (LxW), machine height approx. 1900 mm, machine net weight approx. 950 kg
Disc valve, flap valve, ball valve, butterfly valve, shut-off valve -without: drive -Connection: DN50 -Material: Stainless steel -Weight 2 kg
Sell a Spit P370 Spitfire nail gun, bolt fastener. The machine is in good condition, functional and tested.
Work table bakery - confectionery table with granite worktop open at the bottom with intermediate shelf Stainless steel Approx. dimensions: 2000 x 800 x 900 mm, WxDxH Occasion
PROBAT UW 801 MILL IN GOOD WORKING ORDER - SOLD WITH A PAIR OF SPARE CYLINDERS - WITHOUT ELECTRICAL CABINET - THE INSTALLED CYLINDERS ARE IN VERY GOOD CONDITION - CAPACITY: +/- 1000 K / H - PROVIDED FOR WATER COOLING (TO BE RENOVATED). IMMEDIATELY AVAILABLE
Heating fan, mobile heater, gas heater, gas blower -Power: adjustable 30 kW -Consumption: 2.3 kg/h -Connection pressure: 0.35-1.5 bar -Air flow rate: 1000 m³/h -Weight: 21 kg
Terminal / Monitor for CNC Printing Machines F&K , Mint condition because never used
ID2953 Henke Variant year of construction 1992/93 Brick Manufacturing Plant with core and attachment, for the production of paving stones, slabs, kerbstones, U and L stones, hollow blocks Board size 1,350 x 1,150mm (approx. 1935 piece) Min. product height 40 mm Max. product height 500 mm Drawing plate function and cross-punch cleaning Vibration HENKE Vibra-Matik with 4 servomotors SEW Renewal of the machine control in 2011 to Siemens S7-400 incl. Board destacking device wet side incl. Conveyor line wet side (V-belt and intermediate chain transport) incl. Conveyor section on the dry side (latch track and lowering ladder outlet) incl. Board turning cross dry side incl. Board stacking device dry side incl. Board package lift truck with transverse traversing platform (board storage) incl. Packaging HENKE incl. drying chamber The machine is in good working condition and can ...
Piller Blower 63790 KKX 90710 Air blower of 2018, like new, complete with control system, 1 available. 26.5 m3/s, 15 bar, 445 kW Blower Piller 63790 KKX 90710 Manufacturer: Piller Model No.: 63790 KKX 90710 Serial Number: 903736 Type: Air Blower Power [kW]: 445 Flow rate [m3/s]: 26.5 Pressure max [bar]: 15 Year of construction: 2018 Weight [kg]: 8.587
used
PRIMA INDUSTRIE laser cutting system Mod. PLATINUM 1530 - CNC PRIMACH 9000L Year of manufacture 1999 Power 2500W Machine hours 15,000 generator ROFIN-SINAR DC 025 cutting table 1500x3000mm HCF NHT 45 refrigerator equipped with lathe for tube processing automatic pallet changer
- Capacity: 10 – 17 to/h - Height-adjustable feet: 500 – 1050 mm - Very little use of the machine - In very good condition
Converter module -Type: S 909 -Number: 2x module converters available -Price: per piece -Weight: 6.3 kg
ID2850 Pallmann year/Bauahr 2001 70 t Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers
Device for inline measurement of Brix(sugar)o.Diet, CO² and conductivity
Electric motor, three-phase motor, external rotor motor -Manufacturer: Papst, external rotor motor type RO 20.50-2 -Power: 24 W -Speed: 2400 rpm -Voltage: 220 V / 50 Hz Shaft: Ø 6 x 20 mm -Number: 2x motors available -Price per piece -Dimensions: 85/70 / H70 mm -Weight: 0.7 kg/pc.
Max. moulding area: 38 x 50 cm electrics - voltage/frequency: 230 V/Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PolyClip ICA 8700 in working condition as back from customer
Control unit, control panel, operating panel, control unit, foot switch, safety foot switch -Foot switch: Safety foot switch -Metal housing: with protective cover, die-cast aluminum -Connection cable: 10-pin plug -Overall dimensions: 400/300/H115 mm -Weight: 2.9 kg
Crank winch, Dunkraft, diamond jack, steel winch -Manufacturer: Pfaff, steel winch type 0104000 -Load capacity: 1.5 t -Lifting height: 0.35 m -Number: 4x winch available -Price per piece -Dimension: 740/120/140 mm -Weight: 10.3 kg / pc.
Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 162 mm -Inside: O 116 mm -Thickness: 2mm -Number: 107x seal available -Price per piece -Minimum purchase: 10 pieces -Weight: 0.05 kg/pc.
Control unit, control panel, operating panel, control unit, foot switch, safety foot switch -Foot switch: Safety foot switch from Promecam STPC 250 40 121 press brake -Metal housing: with protective cover -Overall dimensions: 380/180/H165 mm -Weight: 6.7 kg
Operating unit, operating panel, operating panel, operating unit, foot switch, safety foot switch -Foot switch: Safety foot switch from press brake Promecam STPC 250 40 121 -Metal housing: with protective hood -Total dimensions: 500/400/H220 mm -Weight: 6.5 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 2 parts -Upper tool: dimensions 835 x 60 x 130 mm each -Dimensions: see the drawing in the photos -Total weight: 47.5 kg
Bending tool, die, upper knife, upper tool -Tool: for press brake, 9 pieces -Dimensions: 95 x 31 mm -Total length: 5005mm -Dimensions: see the drawing in the photos -Lengths: 5 x 835 mm / 1 x 300/260/170/100 mm each -Transport dimension: 835/210/100 mm -Weight: 86 kg
maximum number of results exceeded
please refine your search
