Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!  ...

• more information

Description x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in very good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90 ...

Lid FP 1 in very nice condition x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Digital display Z-502 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and til ...

Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active  ...

• more information

Travel XYZ: 300-150-340mm Spindle holder: Iso 40 S20x2 Spindle speeds: 40-2000 Table size: 260x600mm Floating angle table Digital Heidenhein on 3 axes Some tool holders Engine brake Voltage 3×380 Volt Power 1.1 – 1.3 kW With CE  ...

• more information

x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm table-size: 600x260 mm spindle taper ISO: 40 spindle turning speed range: 40-2000 U/min weight of the machine ca.: 0.7 t Visit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

Lid FP1 Geometrically overhauled New bellows, scrapers, chains. Bevel gear set in the head New 3 axis digital display Engine with brake Emergency Stop Switch X- 300 mm, Y 150 mm, Z- 340 mm  ...

• more information

- Well-maintained collector's item with lots of accessories and tools - Lid bumper head - Swivel angle table -Vice - Workspace lighting - Tool table Specification Travel: - X-axis: 250 mm - Y-axis: 150 mm - Z-axis: 340 mm Table: - Clamping surface: 600 x 260/200 mm - T-slots: 5 - T-slot width: 12 mm - Table rotation range: ± 30° - Table swivel range: ± 30° - Vise wingspan: 105 mm Spindle: - Spindle speed: 20 - 2000 rpm - Vertical speed range: 60 - 1200 rpm - Horizontal speed range: 95 - 1900 rpm - Speed levels: 12 - Feed range: 8.5 - 475 mm/min - Feed stages: 10 - Spindle mount: MK4 - Quill stroke vertical: 65 mm - Milling head swivel range: ± 90° Machin ...

- X: 300 mm - Y: 150 mm - Z: 340 mm - Clamping surface: 600 x 210 mm - Speed range: 40 - 2000 rpm - Spindle mount: SK 40 - Spindle drive: 1.7 kW - Digital display: 3-axis DITRON Digital - Total power: 1.7 kW - Machine weight: 830 kg - Space requirements (W x D x H): 1.2 x 0.9 x 1.7 m - Condition: good Details good condition, ready for immediate use Accessories Counter holder, dividing head

- X: 300 mm - Y: 160 mm - Z: 340 mm - Speed range: 40 - 2000 rpm - Clamping surface: 600 x 210 mm - Spindle mount: SK 40 - Control: TNC 113 digital display - Total power: 1.5 / 1.9 kW - Machine weight: 1050 kg - Space requirements (W x D x H): 1.2 x 1.0 x 1.9 m - Condition: good Details rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head can be moved to spindle block 100 mm Accessories Machine feet, documentation, counter holder, no other accessories