deckel 1 used for sale

Heating, gas and oil burners, burner control, burner flap control, flue gas flap control -Burner control: Flap control burner -Type: unfortunately no type designation -Shaft: Ø 12 x 25 mm -Hole spacing: 50/65 mm M6 -Dimensions: 120/120 / H140 mm -Weight: 1.5 kg

Geared motor Article number: 2KJ3102-1DE22-2AP1-Z FDU1705/2370145 001 Z29-LE80MH4E-L16\10N 50HZ - 60HZ 0.75 KW S1 1440r\min 50HZ n2:99r\min 60HZ n2:120r\min 18Kg NEW and fully functional, from stock, see pictures for more details.

SPECIFICATIONS: Burning capacity Kcal/h: 150,000 Usual yield Kcal/h: 120,000 Air flow m³/h: 8,900 Electrical power of the fans KW: 2.9 Burning wood and legally permissible solid fuels. Weight kg: 615

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Manufacturer: SP, Step clamps, clamping range 100 - 220 mm -T-slot nuts: mm -Quantity: 3 pieces -Price: per piece -Dimensions: 130/70/H245 mm -Weight: 3.3 kg/piece

Geared motor Article number: FDU1703-2358222 2KJ3102-1FN23-2HA1-Z ZZ29-LE9100ZLSA4P-L16NH IP 55 50HZ - 60HZ 7.65\4.4A 4.35A 2.2KW S1 2.55KWS1 1465r\min 50HZ n2:419r\min 60HZ n2:507r\min 35Kg NEW and fully functional, from stock, see pictures for more details.

Key data: 63 mm, 1300

Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of Make: 1994 Machine No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-hard profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Cond ...

Geared motor Article number: 2KJ3102-1DF23-2HL1-Z FDU1703/2358250 002 ZZZ29-LE80ZMQ4P IP 55 50HZ - 60HZ 3.04A 1.68A 0.75 KW S1 0.86A 1450r\min 50HZ n2:143r\min 60HZ n2:173r\min 15Kg NEW and fully functional, from stock, see pictures for more details.

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

Geared motor Article number: FDU1703-2358223 2KJ3102-1FN23-2HA1-Z ZZ29-LE9100ZLSA4P-L16NH IP 55 50HZ - 60HZ 7.65\4.4A 4.35A 2.2KW S1 2.55KWS1 1465r\min 50HZ n2:419r\min 60HZ n2:507r\min 37Kg NEW and fully functional, from stock, see pictures for more details.

Locker changing room 1800 x 1200 x 500 RA2221 Manufacturer: unknown width: 1200 mm Height: 1800 mm depth: 500 mm different versions available 3 x 2, 2 x 2, 3 x 4 and 2 x 4 (horizontal x vertical) lockers benches also available Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Manufacturer: Tyrolit, grinding wheel 100x50x20 mm unused Ovp -Type: 139155 -Usage: dry grinding, hard metal -Dimension box: 110/110 / H70 mm -Weight: 0.4 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 252 x 145 mm, height 148 mm -Wall thickness: 25 mm -Mounting grooves: 45 x 16 mm / 64 x 17 mm -Bore: Ø 33 mm -Dimensions: 252/145/H148 mm -Weight: 9.3 kg

Stop for lathe support, longitudinal stop, lathe, support stop -Clamping tool: stop for lathe support -Bore: Ø 45 mm -Dimensions: see photo techn. drawing -Total dimensions: 134/100/H186 mm -Total weight: 9 kg

Geared motor Article number: FDU1711-2398534 2KJ3102-1EK23-2HF1-Z Z29-LE80MH4E-L16\10N IP55 50HZ - 60HZ 3.11\1.79A 1.72A 1.1KW S1 1.27KWS1 1440r\min 50HZ n2:235r\min 60HZ n2:285r\min 18Kg NEW and fully functional, from stock, see pictures for more details.

Transnorm roller curve combination right and left 45°-1200-900-800 IR800 1551 mm RA2232 Make: Transnorm Running direction: Curve combination clockwise/anticlockwise Roller width (RB): 800 mm conical, plastic coating Nominal/outer width (NB): 900 mm Inner radius (IR): 800 mm Center section length: 1200 mm Offset: 1551 mm Frame height: 80 mm Overall height including motor: 450 mm Drive/transmission: Chain Electrical data: 300-500 V, 0.37 kW Gear motor: SEW, R17DT71D4/TH Conveying speed: please contact us Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Nomina ...

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tool, step claws, low clamps, clamping irons, clamping brackets -Clamping tool: clamp -Shaft: Ø 40 mm -Dimensions: see photos -Total dimensions: 505/100/H145 mm -Total weight: 12.7 kg

Geared motor Article number: FDU1702 2358249 005 2KJ3102-1DE22-2AP1-Z Z29-LE80MH4E-L16\10N IP55 50HZ - 60HZ 3.11\1.79A 1.72A 0.75KW S1 1440r\min 50HZ n2:99.0r\min 60HZ n2:120r\min 18Kg NEW and fully functional, from stock, see pictures for more details.

: 28 t : 2000 mm : 1000 mm machine weight ab.: 11000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor Article number: FDU1703 2359264 008 2KJ3101-1CE11-9FR1-Z ZF19-LA71MH4-L4N IP55 50HZ 1.73\1.0A 0.37KW S1 1370r\min n2:72.4r\min 11Kg NEW and fully functional, from stock, see pictures for more details.

plate thickness: 4 mm blade length: 150 mm cutting angle: 30-120 ° Table dimensions: 1000x650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surface: 1667 x 1300 mm -Wall thickness: 45 mm -T slots: slot width 18 mm -Dimensions: see photos -Dimensions: 1667/1000/H1400 mm -Weight: 1548 kg

Collet holder, tool holder, tool holder, milling holder, milling tool, short-shaft system -Manufacturer: DEPO, milling mount SK50 -Type: 100 5 77 -Milling tool holder: conical, Ø 34/24 mm M16 -Dimension total Ø97x385mm -Weight: 5.9 kg

Tool holder, milling holder, collet holder, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Sandvik Coromant milling holder SK45 -Type: 390.140-45 50 027 -Dimension: O83 x 140 mm -Weight: 1.7 kg

Connected load 380V 6.8kW 12A with sliding table 1100 mm Table size 1100 x 900 mm Height adjustment with hand crank Integral stop jaws Stops individually adjustable via Siko counter Aigner milling cutter protection device Suction 1x120 1x150 mm Speeds: 2900/4400/6000/8000/10000 rpm

material width: max. 700 mm : : max. 1 mm : Cutting capacity structural steel: max. 1 mm Cutting capacity aluminum: max. 1 mm Cutting capacity stainless steel: max. 0,5 mm : : max. 1 mm : max. 1,5 mm weight of the machine ca.: ca. 150 kg dimensions: 1200 x 400 x 1200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck with accessories -Type: NCGFLK 160-AD+B45 -Number: 8x chuck available -Price per piece -Dimensions box: 270/195/H110 mm -Weight: 3.9 kg/pcs.

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck with accessories -Type: NCGFLK 160-AD+B50 -Number: 8x chuck available -Price per piece -Dimensions box: 270/195/H110 mm -Weight: 4.9 kg/pcs.

Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Stöber, Gearbox type C002NO 105MQ10 -Translation: i 10,297 -Drive shaft: Ø 20 x 40 mm -Dimensions: see photo technical drawing -M2 perm: 43 Nm / n1= 3000 rpm -Dimensions: 240/140/H155 mm -Weight: 9.1 kg

Key data: 1350 mm, 3

electronic control - First roller D=250 mm made of grooved steel - Second roller D=320 mm made of rubber - third roller D=? mm made of steel with carpet with button - Pneumatic on/off of the 3 groups - Air purification fan on the 3 bands - Sanding belt 2620 mm - Electronic oscillation of the abrasive belts - Automatic layer positioner - Variable feed speed of the carpet with inverter KW 2.2 - Vacuum conveyor belt - ionization in the outlet

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: MW Markisches Werk, hydraulic unit with container -Type: 1324 -Shaft: 12 x 8 mm, see photo techn. drawing -Individual components: see photos -Dimensions: 280/270/H450 mm -Total weight: 9.8 kg

Machine almost unused Pressure: 60.0 t Square steel: 35.0 mm Technical specifications Pressure: 60.0 t Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in sqmm: Ø28 in 15 / Ø38 in 11 mm Projection: 220 mm Flat steel: 200x20 / 300x15 mm Y0798Jol Knife length: 317 mm Oil capacity: 45.0 ltr. Working height: 940 / 1140 mm Stroke rates per minute: max. 26 Working stroke: 55.0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimensions HxWxD: 1510 x 590 x 1570 mm

- Spindle speed:50 - 7 100 [rpm] - 6 spindle feeds:0.03 - 0.4 [mm/t] - Spindle stroke:210 [mm] - X-axis machining row:850 / 1 000 [mm] - Y axis machining series:465 [mm] - Z axis machining series:750 [mm] - Tension dimension on table:1 570 x 500 [mm] - T Groove:7 - Groove centre distance:50 [mm] - Width of groove:12H8 - Positioning precision:0.01 [mm] - Repetition Precision:0.005 [mm] - maxi part weight:250 [kg] - Drive power:5 [KW] - Steel Bore Capacity: 30 [mm] - Steel Internal Tapping Capacity: M 20 - Cast Iron Internal Tapping Capacity: M 24

Key data: 100 t, 355 mm, 125 mm

Press force 100 t The dimensions of the table top 1000 x 640 mm Stroke adjustment 125 mm Plunger adjustment 90 mm Stroke rate 75-150 rpm Main motor power 6/10 kW Machine dimensions L x W x H 1725 x 2230 x 2970 mm Machine weight 10100 kg

Max capacity 1000 kg Pile height 320 mm - 1300 mm (including pallet) Paper size 450 mm x 320 mm - 1200 mm x 800 mm Speed : 15-20 pallets/hour

Keyboard, control panel, industrial, PLC workstation, programming device, handheld programming device -Manufacturer: Siemens, programming device Coros with accessory cable orig -Type: Coros OP3 6AV3503-1DB10 -Dimensions cardboard: 235/230/H55 mm -Total weight: 0.7 kg

PLC control, CPU, main memory, CPU, central unit -Manufacturer: Siemens, central device Central Controller Simatic -Type: Simatic S5 101U 6ES5 101-8UA13 -Dimensions: 260/115/H165 mm -Weight: 2.9 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module -Manufacturer: Siemens Simatic S5 memory module Memory Submodule -Type: 6ES5 375-1LA15 -Number: 17x modules available -Price per piece -Dimensions: 60/90/H15 mm -Weight: 0.1 kg/pc.

Travel: 1000mm/560mm/1100mm, Tool holder: ISO 50, Quill stroke: 125mm, Speed: 2000rpm, Feed: 3000mm/min, Rapid traverse: 6m/min, Max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, Weight: approx. 7100kg, CNC 432 control, Hours: 7077h. Documentation available.

Single-screw regranulation plant NGR Technical details: • Screw diameter : 85 mm • Production capacity: 500 kg/h • Screw L/D ratio: 21 • Degassing system: Yes • Engine power: 90 kW • Nozzle Type: Spaghetti • Suitable for (material) processing: PET,PE • Recently recycled material: PET • Suitable Material Form: Film Flakes, Trims • Use of the product: Sheet • SCREEN CHANGER: BSC160 Back-flushing screen changer • Screen Changer Type: Automatic Other specifications: Recycling machine for PET (non-food safe) and PE Material Output: PET/PE printed films (12pm PET + 30pm PE) Origin: Post-Industrial, Moisture: Dry (

Universal CNC cycle separation machine of the brand Pinacho suitable for tooling, fixture construction, training and mold making Circumferential diameter 360mm Center width 1000mm Control Fagor 8055 Tailstock MK 3 Tool station Barufaldi 6-fold Speed 1-4000rpm Connection 380V - 5.5 KW

EREMA flush filter with partial flush back. SW 4/134 RTF

Control board, output board, controller, memory module, PLC controller, expansion module, interface module -Manufacturer: Siemens Simatic S5 Memory Submodule -Type: 6ES5 375-1LA21 -Number: 3 modules available -Price: per piece -Dimensions: 60/90/H15 mm -Weight: 0.1 kg/pc.

Control card, output card, controller, memory module, PLC controller, expansion module, interface module -Manufacturer: Siemens Simatic S5 memory module memory submodule -Type: 6ES5 375-1LA41 -Dimensions: 60/90/H15 mm -Weight: 0.1kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module -Manufacturer: Siemens Simatic S5 memory module memory submodule -Type: 6ES5 375-1LA41-Z -Dimensions: 60/90/H15 mm -Weight: 0.1kg

Universal CNC cycle separation machine of the brand Pinacho suitable for tooling, fixture construction, training and mold making Circumferential diameter 360mm Center width 1000mm Control Fagor 8055 Tailstock MK 3 Tool station Barufaldi 6-fold Speed 1-4000rpm Connection 380V - 5.5 KW

Key data: 95 KW, 1500 1/min

DEUTZ BF6M-1013 Engine, 7.2 L Diesel, 95 KW, 1500 rpm engine, 6 cylinder diesel, German Machine, Year 2003 - Engine was built into generator. Since the generator is defective the engine is sold. Engine runs very well, - Video available

• Fully automatic machine for cleaning (blowing out) bottles using compressed air • Running direction from left to right • Connection pressure 6-9 bar, working pressure 0.5-3.0 bar • Output max. 12,000 bottles/h • Bottles are rotated 180° so that the openings point downwards. Blow-out needles plunge into the interior of the bottles • Pressure sensor for checking the correct blow-out pressure • Extraction of blow-out air and residues below the bottles • HMI Siemens Simatic Touch Panel • PLC Siemens S7-300 • With format set for 10 ml vials (diam. 25.3 x 46.2 and diam. 24.0 x 45.0, other format sets on request) • Connection 230/400V/50Hz • Has worked together with bottle unscrambler 02-0746 (see pdf)

BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...

Ref. no.: 16369 Manufacturer: BATTENFELD Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: very l ...

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, Eprom -Manufacturer: Siemens Simatic S5 EPROM memory module ovp -Type: 6ES5376-1AA21 -Cardboard dimensions: 30/120/H70 mm -Weight: 0.1kg