130,783 used machines on RESALE, but how to find them? Machine Search
current capacity: kVA throat: mm contact pressure capacity: kp volume capacity: Punching capacity: kN punching cross-cut in cmm: stroke: mm weight of the machine ca.: 170 kg dimensions: 1200 x 900 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Daikin ERQ200A7W1B Condensing unit Serial: 8008515 2020, condensing unit, Gas R410A, 3Ph
Inv. Num. : 8094 Type:- Producer: Doosan Created: 2023 Parameters: Maximum load capacity: 25 kg Inclination: 2700 mm Working Range: 360
Selling Proposal for a Generator Set Product: Container generator set 20 FT Engine: Detroit Diesel type CW800 Power: 800 kVA Year of creation: 1997 Operating hours: 1650 hours Status: Always serviced, currently operating in a data center Contact 0033689741883 Mail: negomat93orange.fr
Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg
Key data: 2200 t
Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters
Connected load 380V 16A Pneumatic connection 6bar Total length of the machine 4300 mm Total width of the machine 1300 mm Highest press length 2650 mm Press width 1000 mm Press height 1000 mm Press pressure up to 150 bar Electric width adjustment with digital display Foot switch for pressing
Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup
Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN32 PN16 -Quantity: 1x valve available -Dimension: 180/140/H280 mm -Weight: 7.2 kg
Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN20 PN16 -Quantity: 1x valve available -Dimension: 150/130/H260 mm -Weight: 4.4 kg
Year. 12/2016 type DC-Pro 5 125 1/1 H5 V24/6 Load capacity 125 kg Hakenweg 5 m Lifting speed 6/24 m/min Warranty - 6 months
Steam trap, ball float, steam trap ARI Cona, ball float steam waste -Manufacturer: ARI, float steam trap with flanges -Type: CNU R4 -Connection: DN50 PN16 -Dimension: 275/230/H365 mm -Weight: 23.2 kg/pc.
Key data: 750 mm, 600525 mm
Machine Details Stock-No. 1105-04039 Type of machine Machining Center - Universal Make DMG Type DMU 70 EVOLUTION LINEAR Year of manufacture 2008 Type of control CNC Storage location FRANCE Country of origin GERMANY Delivery time IMMEDIATELY Freight basis EX WORKS Technical details X-Travel 750 mm Y-Travel 600 mm Z-Travel 520 mm revolutions per minute 18000 rpm spindle taper ISO SK 40 control HEINDENHAIN ITNC 530 chip conveyor YES kW total power requirement 50 kW weight of the machine approx. 11 t Additional information VERY NICE MACHINE COOLING TRONG THE SPINDEL 40 BAR HP CHIP CONVOYER HSK 63 MAGASIN 120 TOOLS CTXS TROUGHT THE SPINDLE 40 BARS
live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Drehmeister, live center -Type: MK6 -Recording: MK6 -Dimensions: Ø 124 x 350 mm -Weight: 11.8 kg
Motor power 5.5kW 400V 1240 rpm Boiler 2 pieces à 100 liters Maximum volume flow 850 litres Maximum pressure 10 bar Refrigeration Dryer AD54 No. 17M019986 Motor 0.37kW 230V max. 16 bar input Flow rate 900 litres/min Coolant R13a-0,21kg The compressor and dryer are mounted as a single unit on a steel pan, which can also be used as a pallet with Pallet truck functions (to be transported with pallet truck)
1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Relocated: 2021 Raw Material CR, GI, COLOR COATING COILS Strip width: 600 – 1540 mm Thickness: 0.5 - 2.0 mm Coil Weight Max. 15,000 Kg Sheet Length: 500 - 2,800 mm Scope of supply: Coil Car Unco ...
HOMOGENISER Manufacture : APV MANTON GAULIN Model : K3 Capacity : 1200 L/h Bar : 200 bar Stages : 2 Manual Book : Included
Make: Gea model : ONE 15TS Year : 2018 Serial number : 14432 Bar : 200 Stages : 2 Capacity : 2000 L/h Spare parts included Manual Book included Ready to to plug in and run . NEVER USED
Saddle Stitcher With brochure function Counter: 1.9 million Connecting Bridge DSF-DSC Duplo LDR , 2017 2 CollationTower Duplo DSC – 10/60, 2020 Cover Feeder Duplo DSF-CFL, 2016 Counter Duplo DKT-K, 2017 Head and foot trimming Duplo DKT-200, 2017 Front Trimmer Duplo DBMS-T, 2017 Stitcher Duplo DBMS-S, 2017 Folder Duplo DBMS-F2, 2017 In production Available: immediately Located: Germany
Vibration conveyor, vibratory conveyor, vibration feeder, feeding device, spiral conveyor, vibration filler, vibratory spiral conveyor, feeder-bowl -Manufacturer: Deprag, spiral conveyor vibration conveyor -Type: 0522-EP/0.75-1 -Connection: 230 volts -Transport dimensions: 500/420/H960 mm -Weight: 33 kg
Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, Auxiliary contactor Cntactor Relay unused Ovp -Type: DIL ER-22-G -Voltage: 60 VDC -Number: 19x contactors available -Price per piece -Dimensions box: 60/50/H60 mm -Weight: 0.2 kg/piece
Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, Auxiliary contactor Cntactor Relay unused Ovp -Type: DIL ER-31-G -Number: 15x contactors available -Price per piece -Dimensions box: 60/50/H60 mm -Weight: 0.2 kg/piece
HORIZONTAL LATHE DAEWOO PUMA TT1800SY :::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 18iTB - Main Spindle Nose: ASA 6 - Main Spindle Power: 22.4Kw Main spindle bar passage: 65mm - Turning diameter: 230mm - Turning length: 980mm - Main spindle speed: 5000 Number of tool turrets: 2 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 165mm Y-axis travel first turret: +- 50mm Z-axis travel first turret: 700mm Second turret X-axis travel: 190mm Second turret Z-axis travel: 720mm Sub-spindle: yes Spindle nose: ASA 6 Number of counter-spindle speeds: 5000 Counter spindle power: 22Kw Bar loader model and brand: Iemca Master 880 Chip conveyor: belt Machine equipment: device for unloading long pieces Set of fixed and motorized tool holders :::D DIMENSIONS AND WEIG ...
Key data: 635 mm, 510 mm, 460 mm
Machine Details Stock-No. 1105-04041 Type of machine Machining Center - Vertical Make LID MAHO DMG Type DMC 635 V Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight basis EX WORK Price Technical details X-Travel 635 mm Y-Travel 510 mm Z-Travel 460 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min feeds longditudinal/cross/vertical 1 - 30000 mm/min Rapid motion -longitudinal/cross/vertical 30 m/min No. of Tools in Magazine 20 workpiece diameter at full load 80 mm wotkpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg table load 600 kg spindle drive 9 / 11 kW control HEIDENHAIN TNC 530I total power requirement 30 kVA Additional information cnc HEIDENHAIN I TNC 530 MAGSIN POSITIONS 32 SK 40 El ...
Key data: 20000 kN, 135 mm
Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...
Key data: 880 mm, 730 mm, 730 mm
GENERAL Project No.: 905698 Quantity: 1 pcs. Manufacturer: DMG MORI Type: NHX 5000 Control: Siemens 840 D solutionline Year of Make: 2016 Condition: Used machine Approx. (hrs): 26,341 Spindle in approx. (hrs.): 9,666 DESCRIPTION MILL Travel in X 880 mm Travel in Y 730 mm Travel in Z 730 mm Max. rapid traverse speed in X/Y/Z 60/60/60 m/min Max. feed speed in X/Y/Z 6/6/6 m/min Tool holder HSK 63 Max. speed milling spindle 20000 1/min Max. power at ED 10-40/100% 15/11 kW Tool magazine 40 stations Rotating pallet changer (set-up station can be rotated by motor) 2-fold Max. workpiece weight per pallet 500 kg Rotary table NC-controlled Clamping hydraulics OTHER EQUIPMENT IR Workpiece Probes Tool breakage detection by means of a probe Splash protection cladding with fully encapsulated working area Rotating viewing window Lighting in the work area Scrap ...
DMG MORI CMX 1100 V CNC machining center was built in 2019 in Japan by DMG MORI CO.,LTD. The machine, designed for machining workpieces with a maximum weight of 1000 kg, is distinguished by the use of state-of-the-art components and technical solutions which guarantee excellent machining results for many years of continuous operation. The machining process is performed inside a fully illuminated workspace by means of reliable components in the form of cutting tools and a high-speed spindle. The ‘C’ shaped cast iron bed perfectly dampens any vibrations and oscillations generated during machining, while ensuring the highest possible process stability. The CMX 1100 V CNC vertical machining center on offer also has a wide range of optional equipment, consisting of, among others, measuring probes from the renowned RENISHAW brand, a divider and the advanced MAPPS FANUC CNC control. Over ...
CNC control, control, axis control -Control: Item DS0013373-1 -Type: unfortunately no further type and manufacturer designation -Individual components/connectors: see photos -Number: 2x control available -Price per piece -Dimensions: 250/120/H70 mm -Weight: 1.4 kg/pc.
one used offset printing machine Heidelberg GTO 52 2 Year of manufacture 1997 Format 36x52cm DDS dampening system
DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: SEM, DC gear motor -Type: DPM30E4 -Voltage: 36 V -Speed: 70 rpm -technical data: see photo type plate -Shaft: Ø 30 x 50 mm -Dimensions: 430/150/H130mm -Weight: 14.3 kg
Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, crane remote control with cable -Cable length: 5.85 m -Connector: 24-pin -Dimensions: 850/400/H150 mm -Weight: 10.5 kg
DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Speed: 146 -Voltage: 160 V -Power: 300 W / 3000 rpm -technical data: see photo type plate -Shaft: Ø 16 x 27 mm -Dimensions: 320/120/H155mm -Weight: 10 kg
Powerful vacuum cleaner for dust, smoke, chips Suction power 7.58 m³ / min Vacuum 520 mbar Air requirement 3.25 m³ / min Suction nozzle NW 76 mm Suction hose 5.5 m Collection tank 60 litres HEPA Safety Filter Cartridge 2.2m² - Dust Class H Space requirement L - 1,100 x W - 680 x H - 2,200 mm Weight approx. 130 kg
DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Dierking, DC gear motor type SO GP 86-2L -Voltage: 160 V -Power: 300 watts -Speed: 3000/146 rpm / i = 20.5 : 1 -Shaft: Ø 16 x 30 mm -Dimensions: 320/160/H150 mm -Weight: 10.1 kg
There is a used, refurbished Diosna spiral mixer SP 120 D (for max. 120kg dough / 75kg flour) for sale. The spiral mixer is in very good condition and runs quietly. The machine has a stainless steel boiler, a stainless steel spiral, is mobile, has 2 timers and 2 speeds. A video can be sent on request. Price on request.
Contactor, semiconductor contactor, contactor, power contactor, time relay, safety time relay, safety control, motor contactor, auxiliary contactor, multi-function time relay -Manufacturer: Tele, multifunction time relay -Type: D6DM -Quantity: 1 piece Reiais available -Dimensions: 75/25/65 mm -Weight: 0.1 kg
Inv. Num. : 5211 Type: DMU 80 P Producer: Deckel Maho Generated: 2000 Parameters: Control system: Heidenhein TNC 430 Switch-on hours: 87285 h Hours: 34100 h Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Cone: ISO 40 Number of all tools: 30 pieces Equipment: IKZ Workpiece Probe Conveyor Spindle cooling 2020: Replacement of the PILS contactors New E/R module New X/Y Module 2019: Lock Replacement Workpiece Probe Sensor Replacement Replacing the hydraulic hose of the tool clamp 2018: New X/Y axle bolt Replacement of the Y-axis blind Replacement of the B-axis planetary gearbox New motor and B-axis measuring cable 2016: New spindle bearings System Replacement Replacing the UV105 power supply Replacement of the spindle mod ...
Directivity: 100 t Projection: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pushrod speed upwards: 206 mm/s Slide speed downwards: 68 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 3500 x 1650 x 2760 mm Weight: 5500 kg
Boiler lifting tipper Diosna HK 170 Bj: 2010 in used lifting tipper Diosna HK 170 is currently for sale. This machine is immediately available in our warehouse in Bielefeld. -Mobile on castors -380 volt plug -Tipping height approx. 120cm -Total height approx.: 155cm -External dimensions approx: 162cm deep and 120cm wide
Distance between points: 500 mm, Height of points: 100 mm, Ø of the grinding wheel: 300 mm, Normal grinding wheel width: 25 mm, Maximum usable width of the grinding wheel: 50 mm, Grinding wheel hole: 127 mm, Workpiece holder head: 75-110-150-220-275-375-550-750 rpm, Tilt table in degrees: 8º, Hydraulic table speed: 0.10/6 m/min, Automatic fast forward: 20 mm, Advance in depth: 0.10 to 1 mm, Plongee feed rate: 0.10-5 mm/min, Fine-tuning time regulation in seconds: 60s, Workpiece holder head motor: 2 speeds: 0.38/0.55 HP, Motor head for grinding wheels: 3 CV, Hydraulic pump motor: 0.5 HP, Cooling pump motor: 0.10 HP, Internal grinding apparatus: 0.75 HP, Points: Morse 4 and 3, Weight approx.: 1600 Kg
Gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Eberhard Bauer, gear motor -Type: D1A41AHZ/253 -Speed: 137 rpm -Power: 2.2 kW / 1420 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 630/270/H220mm -Weight: 51 kg
weight max.: 250 kg throat: 2.500 mm weight of the machine ca.: t height: 3000 mm Column-mounted slewing jib crane from DEMAG Load capacity 250kg Outreach: 2,500 mm Floor operation Console fixing plate 600 x 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Safeline Metal detector checkweigher Stainless, overall belt dimensions 1600mm x 330mm, aperture 450mm L x 225mm W, AIC checkweigher 250g -3500Kgs, mobile, 1Ph
Bezel, steady rest, lynette -Bezel: max. opening Ø 128 mm -Centre height: 200 mm -technical drawing: in the photos -Total dimensions: 650/80/H420 mm -Weight: 28 kg
A used Kessel lifting tipper Diosna HK 224 is currently for sale. This lifting tipper is immediately available in our warehouse in Bielefeld. Boiler lifting tipper Diosna HK 224 - Boiler lifting tipper for Diosna spiral mixer SP 120 and SP 160 boiler - Dumping height approx. 200cm - Total height height approx. 295cm - Lifting tipper is mobile on castors - 380 Volt 50Hz
Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holder: SK40 holder -Inner diameter 57.5 mm -Dimensions: Ø 76 x 157 mm -Weight: 1.8 kg
Signal columns, signal lights, signal lamp, control light, signal light column, light signal alarm system -Manufacturer: Deckma, signal light -Signal lights: 8 pcs, see photos -Signal horn: 2 tones -Dimensions: 450/290/H740 mm -Weight: 8.6 kg
geared motor -Speed: 19.5 rpm -Power: 0.37 kW -Brake: 24 V -Design: B5 -Shaft: Ø 30 x 60 mm -Protection class: IP 65 -Quantity: 4 available -Price: per piece -Dimensions: 665/200/H250 mm
maximum number of results exceeded
please refine your search
