control station for used for sale

Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20?C / +230?C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

CNC control, control panel, machining center, server cabinet -I/O: Control panel -Dell: Desktop KXGVD -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg

CNC control, control panel, machining center, server cabinet -I/O Control: control panel -Dell: Desktop KXGVD -Dell: Optiplex 390 Tower -Dimensions: 505/640/H1600 mm -Weight: 72 kg

Digital DC Drive Mentor 2 M75 RGB 14 30 KW

Control room inventory, consisting of: 5-piece desk, dimensions: 5800 mm x 1800 mm x 720 mm, 3 desks, dimensions: 1800 mm x 800 mm x 750 mm, 3 cabinets, dimensions: 1250 mm x 450 mm x 1950 mm and 1000 mm x 420 mm x 750 mm, 4 whiteboards, table and 5 chairs. Computers and screens are not included.

Pierce Control Automation RUR 2500 P working range: 2.1 m x 6.1 m control: Burny 10 LCD Completely welded portal construction without screwed connections o linear guide in the transverse axis o AC servomotors (12 000 mm/min.) o Digital synchronization on the laeng axis o CNC control system BURNY 10 LCD Plus with touch screen o membrane keyboard o flyingmounted cutting buttons o Automatic initial adjustment of the plasma torch o voltage monitoring of the plasma torch height o 1 torch parking lot outside the cutting area o circuit breaker at the end of all axes 1 x Plasma Kjellberg 160i with manual gas console cutting up to 25mm qualifying cut Optional autogencan Completely factory-assembled machine assembly and commissioning ready for use

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  ...

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

Pierce control automation RUR 2500 P Work area: 2.1 m x 6.1 m Control: Burny 10 LCD Fully welded Portal construction without bolted connections o LM Guide in the transverse axis o AC servo-motors (12 000 mm / min.) o Digital synchronization on the longitudinal axis o CNC control system BURNY 10 LCD Plus with touch screen o Membrane keyboard o 'Flying' bearing inserts o Automatic initial setting of the plasma torch o Voltage monitoring of plasma torch height o 1 burner parking outside the cutting area o Circuit breaker at the end of all axes 1 x plasma Kjellberg 160i with manual gas console Cut quality cutting up to 25 mm Optional autogen retrofittable Completely Factory reconditioned machine Installation and commissioning on request

; ready to use

; now ready

Module converter -Type: S 909 -Price: per piece -Number: 2x available -Weight: 6.3 kg

Available in stock 3 x Used Capstone Gas Pressure Regulator. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Max Inlet: 250 PSI

BOX weigher LOGISTC&CONTROL | 1.000 c/h Year: 2000 Speed: 1.000 c/h

Foil cutting mill Propulsion : 30 KW Voltage : 400 V / 3 ~ / 50 Hz

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Control Techniques, Brushless AC Servo Drive -Type: MAXAX 100/6000 -Input: 1.5kVA -Output: 1KW -Dimension: 315/230/H60 mm -Weight: 2.9 kg

pressure sensor, pressure transmitter, pressure transmitter, pressure switch, -Manufacturer: Huba control, pressure transmitter type 691.9300071D orig -Input: 0... 10 bar -Pressure: max. 20 bar -Number: 3x transmitter available -Price per piece -Cardboard dimensions: 140/70/H45 mm -Weight: 0.3 kg/pc.

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, angle flange, valve flange, double pressure switch -Manufacturer: Johnsons Controls, double push button, unused in original packaging -Type: P78MCS-9300 -Price: per piece -Number: 7 pieces -Dimensions package: 130/130/H70 mm -Weight: 0.7 kg/piece

hydraulic lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control -Dimensions: 1230/800/H1300 mm -Weight: 450 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel -without: drive -Connection: DN50 -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available -Price: per piece -Weight: 9.69 kg/piece

Frequency converter, frequency converter, drive inverter, controller, variable speed drive, converter, inverter -Manufacturer: Control Techniques, Commander SE frequency converter -Type: SE2D200150 SE 2.5M/TL -Power: 1,5 kW -Input: 200/240V - 50/60Hz -Output: 3 Ph 0-240V 0-1000Hz -Dimension: 145/130/H280 mm -Weight: 3.3 kg

Description Power: 230v diam.scarico: 100 mm height: 630 mm Table size: 400 x 600 mm. AVAILABLE N° 5

Description Mold Control Unit: 1 zone microcontroller: RTC - 550 output voltage: 230 V temperature range: 0-400 ° C

X-travel: 3700mm, y-travel: 2200mm, z-travel: 200mm, table dimensions: 4000x2300mm, connected load: 23kW, length: 5000mm, width: 3300mm, height: 2350mm, weight: 1,2t.

Heat and Control mobile grill, model: RB-40-1, serial number: S198-0778, year of construction: 1999, 380 V, 3 Ph, 50 Hz, s/s mesh belt, belt width: 1000 mm, total dimensions: 3400 mm x 2300 mm x 2000 mm.

Epson C3-A601S 6-Axis Robot Assembly Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started, the robots and servo drives of the Statioin are stopped, the pneumatic actuators are switched off and cannot be operated. This station consists of 3 functional substations: Functional sequence St.6.1: Control of ribbon cables: Lift the drive out of the chassis and tilt the drive code Control of 3 ribbon connectors by means of vision sensors on the robot gripper arm Reseat the drive in chassis St.6. ...

WSM Stationary screwdriving unit Screwdriving station Assembly station Automatic station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. 4.6.2 Functional sequence This station consists of 4 substations: St 4.1 Screw chassis: - optical inspection of the core hole position 6 - Positioning of the screwdriver by means of XY-Z servo axis port - 5x screwing from above St. 4.2 Mounting LW angle: - manual placement of the LW angle on the cycle belt handling - eject and position the LW angle by  ...

Epson G10-854SR Robot Screwdriving Station Dosing Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is designed as a closed aluminium frame with a steel welding frame inserted and has a very compact design. The control cabinets and valve terminals are integrated into the system. All movement processes during the operation of the system can be tracked on all sides through large windows and doors. Operation is via a touch screen. The assembly station is divided into substations 3.1 dosing area, 3.2 assembly area KK+SW and 3.3 mounting area front. (KK=heat sink, SW=bulkhead angle) The work steps according to these assembly areas are described below: St.3.1: Dosing range - a WT with attached chassis and printed circuit boards enters the dosing area via the transfer belt. - this is stopped at the stroke positioning ...

Filling station, bagging station for big bag, octabine with material conveying blower Big Bag filling station with conveyor blower for filling regrind or granules in Big Bag 1.5 m³ The Big Bag filling station is robust and easy to handle. The system is ideal for use where dry granules or regrind are to be filled into octabine or big bag. Compact versions have been developed for smaller containers such as small boxes and sacks. These filling stations are ideal for smaller granulators or insert mills to fill smaller quantities of regrind into small boxes or bags. With a sophisticated design and a wide range of combinable options, the filling station can be filled for various bulk materials. The frame and the entire construction is made of sturdy profiled steel materials. Material handling system | Filling station, emptying station for one or two big bag or octabin or for small ...

propulsion: motor with brake, velocity is adjustable due to the possibility to change the gear wheel description: Type of transport chains: 4 chains, able to handle half pallets; pitch 355mm Remarks: as in an usual crate onveyor a stopper with an air cylinder is used; the pallets go against the stopper and are centered by this into their short side direction, after that the stopper goes back and the pallets continue to move on; able to handle half pallets availability: immediatelly Usable width: 1090 mm Installation dimension: 1500 x 1400 x 600 mm weight (m) [kg]: 200 kg Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does  ...

Year of construction 2008 Pumping and control station Previously used on Heidelberg machines Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Available in stock 2 x NEVER USED Capstone Control Stations. Most commonly used for Microturbines C30 Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

90 ° corner station with motor with speed control and rotating plate diameter 250mm without foot - counter clockwise More then 300 machines new and second hand on our seema .de

Miwe DS control panel for stikken furnaces Control panel for Stikkenofen Miwe static

Control for KOMA Monocell for Freezers used on request more info

CNC control, numeric control, made of MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot M Year of construction approx. 1980 Rack with 20 module slots - 12 built-in modules Built-in modules : 1 piece 0.651.406-19.3 UNI 030655-1017 Universal Interface 1 piece 0.650.847-56.1 O32 output card 2 pieces 0.651.708-57.3 I32 032937-1017 Input card 1 piece 0.652.138-36.1 APC 1 piece 0.651.928-25.3 LAB Position control 1 piece 0.651.400-22.3 1 piece 0.860.204-59.1 B32 1 piece 0.652.128-35.0 RE4 1 piece 0.651.269-26.0 ITY 030645-1017 Serial interface 1 piece 0.651.974-23.2 ABS termination card 1 piece 0.651.298-18.3 CPU 030649-101 7 CPU dimensions W x H x D 480x 260 x 220 mm Weight 7 kg Individual cards on request.; used

CNC control, numeric control, made of GILDEMEISTER GDM 65/2A GILDEMEISTER type Eltropilot EP20 GD-2A Year of construction 1989 Order: 150 299 Ser. SKU: 0.854.183 Mains connection: 220 VAC 50 Hz rack with 20 module slots - 11 built-in modules Dimensions W x H x D 480x 260 x 220 mm Weight approx. 7 kg The control comes from a lathe Gildemeister GDM 42/2A . Further components from Gildemeister can be found under stock number: 60343, 60346, 60347; used

CNC control, numeric control, CPU rack made of OKUMA LB 10 OKUMA type OPUS 5000 CPU /IF RACK 9A SKU: E7191-292-325-1 Year of construction 1985 Ser. Nr.: 003184 Dimension W x H x D 390 x 345 x 240 mm The device is still installed ready for operation in an OKUMA LB 10. Further components from OKUMA can be found under stock number: 60403, 60404, 60405, 60407, 60408, 60409, 60410, 60411; used

CNC control in the control panel / machine operator terminal CNC web control FANUC type A14B - 0048 - 0002 Year of construction: 1990- Machine control panel - electronic handwheel - Flexible silicone PC keyboard Dimensions WxHxD: 600 x 260 x 350 mm Weight: approx. 40 kg From stock, function not tested, ideal as spare parts carrier.; used

Vibration control, control electronics KÖBERLEIN RMA-POWER-BOX 107/24/4Q ( RMA-POWER-BOX107/24/4Q ) Input: 24 V DC Output: 10...24 V DC Ersatzteil für Köberlein S 160 700 Dimensions: 140 x 180 x 70 mm

Machine control with control box ELEKTROSCHALTGERÄTE GmbH AUERBACH APF 73 Type: 772.00-0396.0/0 Connected load: 0.67 kW Operating voltage: 380 V 3AC 50 / 60 Hz Control voltage: 24 V AC 50 / 60 Hz IP54 2x ROSSMANITH ROfre 892 Type: 89 23 01, 0,,75 kW 1 x MOELLER - DIL ET 11-M 1 x MOELLER - DIL ET 70 1 x MOELLER -PKZM 1-10 1 x MOELLER -PKZM 1-4 1 x MOELLER - DIL ER-40 1 x MOELLER - DIL EM-10 with 22 DIL EM Control box: ELEK GmbH Cabinet system: MS-Stahlblech 600 x 200 x 400 mm used, tested ! Dimensions: 650 x 230 x 400 mm

Machine control with control box MACRYL, A. WOLF MASCHINENBAU GmbH MB 100 Connected load: 2.0 kW Operating voltage: 220 V AC 50 Hz 1x LENZE 421 E 4 Type: 308597 ( speed controller ) 1 x SCHIELE - AHS 1,5 - 30 sec ( timer relay ) 3 x SCHIELE - DL4K-10 ( main contactor ) 3 x SCHIELE - HL4K-40E ( auxiliary contactor ) 3 x SCHIELE - HL4K-22E ( auxiliary contactor ) 1 x SONTHEIMER - N3/11Z/Z33 ( main switch ) Control box: RITTAL Type: AE 1380 380 x 200 x 380 mm with documents ! used, checked ! Dimensions: 460 x 430 x 200 mm

Time control with control box SIEMENS Timer: OMRON H3CR-A 0.05 sec. - 300 h Switching capacity: 250 V AC, 5 A / 30 V DC, 5 A Main switch: MOELLER TO-2-1 400 V 6.5 kW Transformer: COMATEC TBD2/012.24/F Input: 230 V 1AC, 50 - 60 Hz Output: 24 V AC 12 VA Control box: RITTAL EB 1550 400 x 200 x 120 mm used, tested ! Dimensions: 400 x 340 x 165 mm

Control box with control switch, pre-wired PAGUS Control switch: ELEKTRA TAILFINGEN Type: V3N-F3-B-SI9 Art. No.: 146585 max.15 kW max. 32 A 220 - 690 V 3AC Switching function: keying, two directions, with zero position Control box: 300 x 200 x 120 mm New ! Dimensions: 335 x 235 x 160 mm