colombo remo used for sale

HOT PRESS Type COLOMBO REMO 6/90 heathed by water useful size plates mm. 3000 x 1300 n.06 cylinders diam.mm. 90 open mm. 450 hydraulic pump motor power Hp 3 Thrust 90 Ton Volt. 380/50

HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500

Working Length: 3300 mm

Working Sizes: 1300 x 3500 mm

Working Sizes: 1300 x 3500 mm

Electronic tenoning machine for door and window frames COLOMBO AT 35 second hand machine CE Standard : Yes machine composed by 2 working units : 1 End-cutting circular saw : Blade diameter mm 400 Motor power Hp 4 Horizontal movement of the blade mm 130 Max. height of cut mm. 125 Tenoning spindle : Automatic tenoning carriage: Stroke mm 1700 Worktable dimensions mm 600 x 1100 Spindle diameter mm 50 Spindle length mm. 620 Vertical stroke mm. 540 Max tool diameter mm 320 Motor power Hp 10 Weight kg 1800 volt. 380/50

turning diameter: 1120 mm turning length: 6000 mm swing diameter over bed slide: 760 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Colombo Type: VUP 2S Year of make: 1978 Distance between centers: 6.000 mm Centre height: 560 mm Swing over bed: 1.120 mm ø Swing over support: 760 mm ø 4-Jaw chuck: 1.000 mm ø Digital read-out: Sony Including: 1 x steady rest 520 mm ø 1 x steady rest 950 mm ø 1 x open steady rest Chisel holder Chisel support automatic feed Rapid traverse chisel support Electrically movable counter center Drilling bar: length 2046 mm x 170 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.

I am selling the Colombo Angelo Figli AM33/AF window angle system. Year of construction 2005. Pin side saw + 620mm spindle fully servomotor. Roll forming side 3 spindle + strip cutting unit fully servomotor. Milling heads VYDONA WOOD EU78-92, wood-aluminum 92 everything programmed into the machine and included / possible to bill if not accepted. Combined power 50KW Weight 6000kg. Compact size, cheap also for small workshops. Available right in stock. Condition very good. Complete system with tools / possible to bill if not accepted. Please contact us for more photos and info.

Milling spindle Colombo RV110.22 ISO30 4,4kW 12/18 tupm 200/300 Hz The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, SK30 ground, new seals pressure cylinders etc. Warranty 6 months Delivery in exchange, exchange price!

Milling spindle Colombo RV110.22 ISO30 6,6kW 12/24 tupm 200/400 Hz The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, SK30 ground, new seals pressure cylinders etc. Warranty 6 months Delivery in exchange, exchange price!

Milling spindle Colombo RS110.2250 HSK63F; 7.4kW; 24000 rpm The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, new seals pressure cylinders, etc. Cooling by electric fan 230V. Warranty 6 months

Knuckle Joint Press COLOMBO AGOSTINO 1000 ton dimension table 1000 x 650 mm dimension slide 1000 x 600 mm Year 1991 In excellent working condition

Code: 0252 Brand: COLOMBO Model: 13/8 Presses (No. 2) suitable to bend different types of materials such as solid wooden strips and veneer - es: curved plywood, shells for chairs, seats, sofas, etc. - Equipped with with high-frequency generator The presses can work with mould and counter-mould or with steel-belt 1° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h 2° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h High frequency generator GIORDANO COLOMBO Overall dimensions mm 1100 x 1100 x 1900 h

Stock Number: 3827 Chuck 4 jaws face plate Manufacturer: Colombo & Lenna, Type: 4J-1500 Year of construction: 1980 Specifications: Feed dia. 1500 mm Attachment Camlock 11 Drill 180 Length: 1500 dia., Height: 500 mm, Width: , Weight: 900 kg

Code: 0660 Brand: COLOMBO R. Model: 23/10 Hydraulic cold press for furniture, doors, chipboard, Mdf, solid wood, veneer, plastic laminates, technological materials, aluminium, etc. Technical data: Platen dimensions mm 2300 x 1000 Opening mm 400 N° 2 pistons diameter mm 100 Thrust ton 50 Hydraulic power unit Overall dimensions mm 3000 x 1500 x 2000 h Weight kg 1800

Code: 0246 Brand: COLOMBO Model: ACS 800 Automatic thickness planer for wood, beams, sawmills, plastics, composites and various materials Working width mm 800 Max thickness to be planed mm 270 Motor Hp 10 Knife shaft rpm 5000 Automatic table lifting N° 2 feed speeds N° 2 rollers on table Overall dimensions mm 1350 x 1150 x 1050 h

length of spindle: 150 mm, total power: 16.5 kW, Approx. Onsite Dimension. (l x w x h): 1,800 x 2,500 x 1,700 mm, weight approx.: 1,700 kg

Remote cable connector 15 m P7000 -P3U remote adapter -Part-No.: 8317998 -Number: 1x remote cable available -Price: per piece -Weight: 2 kg/piece

Remote sensor -Manufacturer: Drager -Type: P3U Remote Sensor -Part-No.: 8317275 -Number: 1x P3U remote sensor -Price: per piece -Weight: 1 kg/piece

Hand roller spreader with wheel drive, capacity approx. 60 ltr., spreading width approx. 70 cm. scattering way: salt about 5-6 km, Sand 1 km. Condition: Super See more winter maintenance technology from A to Z stock - photos!

Length 7m, 6 pull-off chains, New condition!; as good as new

Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock ; Werkstaettengeprueft

Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

White IDEAL 2H/2 Pk track width: 900 mm height of track to run 400 mm fully hydraulic, with KABINE and control panel, auxiliary trolley electric, very good

Rollers loyal for three-point hitch. Splitt-, salt and sand spreaders, content 200 ltr. (with optional essay 280 ltr. possible), spread width 100 cm. Foldable litter floors and shutters made of V2A stainless steel, scattered wave with wear-resistant plastic elements, container cover with hinged bar. Min. for hydraulic drive with flow 12 / MAX 25 ltr. / min. Almost like new condition.

Unused. New.

Spreading attachment Küpper-Weisser STA80 W12H. Attachment device for Unimog, trucks, equipment carriers, etc. with municipal hydraulics. Content 1.2 cbm . Equipment: tarpaulin folding roof, control panel and documentation. Further spreading technology as well as snow clearers in various designs and sizes stock edstocked! Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...

<b>Features:</b> Used pallet roller conveyor Condition: Top condition with slight traces of use Material: steel (galvanized) Color: galvanized Professionally dismantled and packaged 10 pieces in stock Price per meter <b>Technical data</b> Manufacturer: Euroroll Condition: Used Colour: galvanised Total length: 2.520mm Removal length: 1,300mm Roller track length: 1.220mm Frame: steel/galvanized Height: 80mm Width: 40mm Incl. 2 brake rollers Diameter: 80mm Pallet namhe and feed element by forklift <b>Pallet roller conveyor</b> Thanks to the excellent workmanship of the pallet roller web, your material glides gently to its destination, even under high loads. <b>Tailor-made logistics for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors o ...

Spreading attachment PIETSCH STA 1.7 MW series 2000, capacity 1.7 m3, conveyor belt, tarpaulin folding roof, spreader rubber, drive via vehicle hydraulics, with remote control and support supports. Sale as is or in parts possible.

Remote-controlled gate loading system H38 For the block-initiating gate incision at high feeds. The gate guide sits in a stationary operating stand with a good overview of the entire cutting system. The machine is in very good condition and can be delivered with new control on request!

properties: Used pallet removal/task element Condition: used Material: Steel (galvanized) Specialist dismantled and packaged 65 pieces in stock Price per meter Technical Data Condition: Used Colour: galvanized Total length: 2,500mm Removal length: 1,300mm Roller web length: 1,200mm Total width: 800mm Conveyor width: 655mm Roller spacing: 160mm Frame: Steel/ galvanized Height: 75mm Pallet entnamhe and feed element by forklift pallet roller conveyor Due to the excellent workmanship of the pallet roller conveyor, your material glides gently to the destination, even under heavy loads. Tailor-made tickets for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the concep ...

Concrete removal robots for horizontal flat milling Consisting of: Robot base suspension, with modular system up to 8 m, with integrated hydraulic system, with control unit (control bottle) with working device and attached lance console and jet lance 700mm electric motor

Snow slingshot Beilhack HS 231 Z, PTO drive 540 rpm.(in driving left, left), heavy design with mounting plate and hydraulic lifting, 360° hydraulically swivelling ejection fireplace, height-adjustable sliding skids. Clearance width 2.30 m, clearing height approx. 1.20 m, throwing distance up to approx. 12 m. Condition good, hydraulic hoses as good as new. other smaller snow blowers as well as snow clearing shields in stock - see photos.

Scatterattachment Küpper-Weisser STA 95 – E50H, spreader for trucks with usable volume 5 m3, screw conveyor, hydraulic drive, spreading width 1 to 6 m, with tarpaulin folding roof, all-round warning light, GPS antenna, wind shield, control panel. More scattering and clearing technology available, see photos!

Spreading attachment Schmidt SST 20 – OAXN MITOS, wet salt spreader with conveyor screw. For Unimog, trucks with municipal hydraulics. Content 2 m3, Sole 860 ltr.. Equipment with tarpaulin folding roof, storage stand, height-adjustable, remote control, Optional PTO pump and hydraulic oil tank available. More winter service technology available - see example photos!

Tablet dust remover,stainless steel,type EB.

Tablet dust remover,Korsch type Quadromat,with brushes

Tablet dust remover,Korsch type Quadromat,with brushes

Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!

- 6 heads - Formats: Ø 67 mm - Very few operating hours - Very good condition Dimensions: - Length: 2000 mm - Width: 1250 mm - Height: 2750 mm

injection molding machine:2.500-5.000 kN demoulding stroke:650 mm max. manipulateable mass:5.000 g X-axis:650 mm Y-axis:1200 mm :3000 mm C - 90 °, pneumatic S - 15mm 2 x gripper 1 x pneumatic No separate safeguarding equipmant, must be protected by the machine! Adapter: 2 x 450mm high, 140x140mm, 535x815mm (M24) Payment terms: 100% prior to delivery

injection molding machine:800 kN demoulding stroke:120 mm max. manipulateable mass:1.500 g X-axis:120 mm Y-axis:500 mm :Schwenkachse mm Payment terms: 100% prior to delivery