Lathe Metal Lathe Model: Conventional Manufacturer: Colchester Type: Triumph 2500 Year of construction: 1991 Turning diameter: 400mm Turning diameter in gap bed: 630mm Diameter: 54mm Center distance: 1250mm Rotation speed: 15-2500 rpm Motor power: 7.5kW Machine weight: 2000kg Machine dimensions: 2600x1750x1350mm

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1250 mm turning diameter over bed: 400 mm turning diameter over slide rest: 246 mm turning speed range: 15 - 2500 U/min spindle bore: 54,0 mm quill stroke: 140 mm morse taper: 4 MK feed range: 0,036 - 1,2 mm/U bed width: 318 mm work height max.: 1050 mm travel -x axis: Plan 250 mm travel -z axis: Ober 130 mm spindle nose: D1-6 Camlock total power requirement: 7,5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2500 x 1100 x 1300 mm from a training workshop good condition (!) The Colchester Triumph VS is the all-rounder”. From the heavy cutting This precision machine corresponds to the fine precision finish Requirements from modern tool construction,  ...

: 0400 mm : 246 mm : 1250 mm : 195 mm : 54 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

: 0400 mm : 246 mm : 1250 mm : 195 mm : 54 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Counter ...

Conventional lathe Digital Type of digital: NEWAL No gap bed Center distance 1250mm Center height 195mm Bore 55mm Spindle speed min (RPM) 25 Spindle speed max (RPM) 2000 ...

• more information

Heavy lathe, lathe, lathe, lead and pull screw lathe, lead and pull screw lathe -Manufacturer: Colchester, lead and pull spindle lathe type Triumph 2000 -Turning length: 1300 mm -Swivel Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

Gap Bed Machine Distance between centers: 30″ / 762 mm Swing over bed: 15″ / 381 mm Swing over cross-slide: 9″ / 228 mm Spindle speeds: 25 to 2000 (16) Spindle bore: 2″ / 50 mm clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse Tool post with holders New 3 jaw chuck 2 Axis DRO system ( OPTIONAL at an extra cost ) Main motor: 7.5 hp Total horsepower: 7.55 hp Coolant

Capacity Swing over bed 400mm 15.7″ Swing over cross slide 246mm 9.6″ Height of centres 195mm 7.7″ Swing in gap 585mm 23″ Gap width from faceplate 165mm 6.5″ Bed length 1270mm 50″ Distance between centres 1270mm 50″ Spindle Spindle nose D1 – 6 Camlock D1 – 6 Camlock Taper in spindle nose bush No 4 MT No 4 MT Spindle bore 54mm 2.1″ Maximum spindle speed 2500 rpm 2500 rpm Spindle speed ranges Low 14 – 300 rpm 14 – 300 rpm Medium 36 – 830 rpm 36 – 830 rpm High 109 – 2500 rpm 109 – 2500 rpm Maximum spindle motor power 7.5kW 10 HP Number of Imperial Pitches 56 56 Range of Imperial Pitches 2 – 56 TPI 2 – 56 TPI Number of Dia ...