| Description: |
CNC portal milling machine router CNC-STEP T-Rex Servo-0609 CNC Fräse
Equiptment / product data CNC-milling machine type High-Z/TRex series
/ 1224
Drive: 3 brushless brand stepping engines with
4,5 ampere.
Possibility of sliding through long and up
to 120mm high materials, no belt drive at the ende of the X axis!
Linear guide on all axis by HIWIN / THK !
Multiple ball-bearing ball-screw spindle on all axes, proprietary
brand!
Rapid traverse max. ca. 12.000 mm/min
Operating
speed max. ca. 8.000 mm/min
Technical definition X/Y :
0,005mm (1/10 Schritt); Z: 0,0025mm
Backlash maximal ca. +/-
10µm (0,010 mm)
Repeat accuracy: ca. 0,01 mm
Clampin surface of grooven panel / T-slot table 2800 x 1340
mm
Travels: X=2400mm; Y=1200mm; Z= 130 mm
Non-contact reed sensors / reference switches / limit switches on
all axes
Double secured emergency-stop button
Energy
chains for a clean cable routing
Total dimensions
with engines : LxBxH ca. 3070 x 1800 x 1420 mm
Milling-engine holder Euroneck Ø43mm
Milling-engine 1,05
kW / 1050 FME 5.000-25.000 U/min with 8mm collet ( optional 3mm, 6mm,
10mm, metric )
incl. software WIN-PCNC USB (optional WINPC NC
Profi) and
CAD/CAM Software ConstruCAM-3D (full version incl.
post-prozessor for WIN PCNC)Software ConstruCAM-3D (full version incl.
post-prozessor for WIN PCNC)
Weight ca. 500 kg
Complete machine incl. 5 channel control 5 x 3,5 ampere, T-slot
panel, wear plate, remote control, software ConstruCAM-3D, WIN PCNC
USB and Kress milling engine 1050 Watt with 8mm collet !
A introduction, unlimited phone-support as well as our
Livesupport/remote maintenance via Teamviewer for lifetime are always
included in this complete unit.
An approximately
2-hour introduction with installation of the software on your PC
,brought with, as well as an explanation of the most important terms
of ConstruCAM-3D, WIN PCNC, Corel Draw etc. sare also possible and
obviously for free.
Technical data regarding the included digital control, aligned to
CNC-milling machine TRex:
5-channel stepping engine
CNC-control with newest SMD technology
Mains voltage 115 -
240 Volt / 47 - 63 Hz.
Line-to-line current 5 x 3,5
ampere
Micro-step-control definition 1/10-Step /
2000 steps/rotation for high quietness
5 connections for 5
brushless engines / stepping engines
Connection
from parallel port with software WIN PCNC Light, Economy or via USB
mit WIN PCNC USB or Profi. C4444965 (obviously also possible with
MACH3, USBCNC, NC-Easy as well as LINUX EMC and LINUX CNC and much
more.)
"Sleep-Funktion" for current reduction
Oscillation- engine-connection 24 volts, adjustable with PWM (for
example tangential knives) optional 24 volts constant for holding
break via ST-connection
Activation of 2 users up to ca. 1200
Watt via software switchable (from WIN PCNC Light), 230 volts, max.
6,0 A per power socket (for example compressor, cooling system,
suction). Both power sockets secured seperately.
0
- 10 volts for connecting a frequency converter for HF/high-frequency
spindle
12 Status-LEDs for operating condition and all
important funktions (Power, Toggle, Move, X, Y, Z, C; overheating,
emergency-stop, relays: spindle/cooling stystem, short circuit)
Connectivity a total of 4 limit- or reference switches plus a
emergency-stop button
Engine connection and control line via
D-Sub 9-pol. (C-axis 15-pol.)
Emergency-stop
button
overheating protection
short-circuit-proof;
ready for operation
seller offer No. resale 67805449
|