We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,976 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Applications The FCA 3463 automatic double clipper closes all plastic, fibrous, and collagen casings from a caliber of 40 to 120 mm, and is even larger in the case of special applications. This flexibility in the caliber range is achieved by rapid change of the clip sizes from 15 to 18 mm and of the voiding distance from 30 to 36 mm. For the loose filling, free from air, of formed products, an additional overspreading with a total voiding distance of 130 mm is available. Function and operation The FCA 3463 is connected mechanically and electrically to the stuffer. The voiding separator provides portions of precise weight, which are clipped as single sausages or rings. The highest safety standards are guaranteed with the two-handed trigger operation required to start the first clip. The automatic double-clipper is controlled electronically via a PLC and servo-frequency inverter. ...
used
Automatic Double Clipper Poly Clip FCA 3442, diameter up to 75 mm, performance up to 130 cycles/min, suitable for plastic - cellulose - and collagen casings, electronic control.
new
Punch for clipping machine Poly-Clip 59895 36 mm for FCA 3461, 3462, 3463, 3430-18 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Clipping machine Manufacturer: Poly Clip Model: FCA 3461 Dimensions: 135x145x200cm Electric power: 3kW
new
Clip guide plate 36br and deflector for clipping machine FCA 160 Poly Clip Item Number : Clip guide plate - 200623 Deflector - 162262 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
used
Poly-clip PDC 600 Semi Automatic Double Clipper, for fibrous, plastic, natural and collagen casings, calibres up to 90 mm, on a trolley, Suitable for following clip sizes: S 625 / 628 / 632 / 638, upon request with separator, in good condition!
Poly-clip PDC 700 semi-automatic double-clipper, year of construction 2002, for fibrous, plastic, natural and collagen casings, calibres up to 115 mm, sits on a trolley, suitable for following clip sizes: S 735 / 740 / 744, air pressure: 4-6 bar, refurbished. The machine is immediately available and can be tested in Koblenz, Germany.
new
Clip outlet for clipping machine FCA 3430-18 Poly Clip Item number : 157124 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
new
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 157073 - Klipper 15/8 , br 30 mm koddiert , for FCA 3430/18,FCA 80,100,140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
new
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 62391 - Klipper 18/13 / BR 36mm , koddiert, für FCA 80, FCA 3430-18,FCA 3461, 3462, 3463 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
new
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : Die 156684 - clipper 15/11 / br 30 mm coded , for FCA3430/18, FCA 80,100,140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
new
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 157073 - Klipper 15/8 , br 30 mm koddiert , for FCA 3430/18,FCA 80,100,140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
new
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 164005 - Klipper S 07 / br 26 mm , not coded , for FCA 120,160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
new
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 164068 - Klipper M 09 / br 30 mm not coded, for FCA 120, 160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
new
dies for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 23819 - Klipper 15/10 / br 30 mm , not coded, for FCA 3415, 3430 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
new
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 273113 - Clipper M 07 / 30 mm , not coded for FCA 80 , 90, 100, 120, 140, 160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
new
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 273115 - Klipper M 07 / 30 mm c2, koddiert, für FCA 80 , 90, 100, 120, 140, 160 Request a Quote Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
new
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 40526 - 30 mm, not coded, for FCA 3430 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
new
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 62147 - Clipper 18/11-12 / br 36 mm, single-sided coded for FCA 3461, 3462, 3463 , FCA 3430/18 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Poly Clip SCD 7095 pneumatically operated single-clipper for all artificial and natural casings, bags and nets. The machine is immediately available and can be tested in Koblenz, Germany.
used
Poly Clip Single-Clipper, suitable for artificial and natural casings, bags and nets The machine is immediately available and can be tested in Koblenz, Germany.
new
Punch for clipping machine Poly-Clip 274305 A 15-30 br for FCA 100, 140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
new
Punch for clipping machine Poly-Clip 163787 36 mm for FCA 90, 120, 140, 160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
new
Punch 15/4 , br 30 mm for clipping machine Poly-Clip FCA-3430 Article number : 23823 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT i3539431 number: PL547-17-47-669 Phone: 0048/33 812 58 60
new
Cylinder pneum. kpl. for Poly Clip FCA 3430,3430-18 ,3463 ,FCA 120,160 - NEW order no. 150390 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT No.: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36
new
Format adjustment motor for Poly Clip FCA 120-S3160-S3 ,AHL 1200 - NEW 24 V Article number 167554 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Clipping machine Poly Clip Type: FCA 160 Made of stainless steel and titanium Easy to maintain Low noise level Adjustable conveyor belt speed Dimensions: 1680x1220x2000mm (min) 1800x1300x2150mm (max) Electrical power: 4kW Voltage: 200 – 480V, 50/60 Hz Compressed air: 5 – 7 bar / 0.5 – 0.7 MPa Weight: 625 kg
used
POLY CLIP ICA 8700 YEAR 2008 CALIBER UP TO 200 MM
used
Type: Automatic clipping machine DCD 6045 Electro pneumatically controlled Low air consumption Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Automatic looper Automatic string dispenser with bobbin holder Delivery time: 30 working days after payment
new
Matrices for single and double clippers 12974 21691 48158 73526 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
used
Technical data of the profile clamp: Manufacturer: META Type: CLIP The scope of delivery includes: 01x Profile clamp, used Design: for double shelves Material colour: hot-dip galvanized Total height: approx. 82 mm Total width: approx. 46 mm Material thickness: approx. 2 mm Weight | Pcs. approx. 0,150 Kg Note: Since these are second-hand goods, there may be damage, rusting, etc. Currently available in stock: approx. 200 pcs. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
used
Floor cutters, asphalt cutters, concrete cutters -Saw blade: Ø 350 mm -Cutting depth: 120 mm -Motor: Honda GX340 8.1 kW 11 HP -Number: 3x available -Price: per piece -Dimensions: 1250/500/H800 mm
used
Floor cutters, asphalt cutters, concrete cutters -Tank: defective -Saw blade: Ø 350 mm -Cutting depth: 120 mm -Motor: Honda G400 7.4 kW 10 HP -Dimensions: 1250/500/H800 mm
used
Floor saw -Motor: Honda petrol engine -Power: 8.1 kW/11 PS -Saw blade diameter: 400 mm -Number: 3 pieces available -Price: per piece
used
Description: Serial number: 100102/2004 Year of manufacture: probably 2004 Power: 1.8 W Speed range: 4900 rpm In case with instructions as shown in the pictures Approx. Onsite Dimension. (l x w x h): 360 x 345 x 310 mm, weight approx.: 15 kg
used
Magnetic drive centrifugal pump, chemical pump, centrifugal pump, water pump SONDERMANN PUMPEN + FILTER GmbH & Co. KG RMPP24/340/90 Qmax.: 340 l/min Hmax.: 2,,2,4 bar Input: Ø 50 mm ( inside ) Output: Ø 30 mm ( inside ) Material: PP Motor: 1.1 kW 220 / 380 V 3AC, 50 Hz used, tested ! Dimensions: 465 x 210 x 240 mm
used
Magnetic Drive Centrifugal Pump, Chemical Pump, Centrifugal Pump, Water Pump SONDERMANN PUMPEN + FILTER GmbH & Co. KG RMPP24/320/90 Qmax.: 320 l/min Hmax.: 2,4 bar input: Ø 50 mm ( inner ) output: Ø 30 mm ( inner ) Material: PP Motor: AEG Type: E AM 80 FX2 1,1 kW 2835 rpm 220 / 380 V 3AC, 50 Hz used, tested ! Dimensions: 480 x 205 x 240 mm
used
- The classic must press nominal power up to 180 kg/h engine power press 1.1 (1.5) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (Electrical connection 400V 50Hz (Electrical connection 400V 50Hz ( 3 phases) Electrical fuse 16 A Laenge 1000 mm width 900 mm Height 1700 mm Hehe Assumption 1770 mm Weight 216 kg material Polystyrene, basket and Muehle in 1.4301 / AISI 304 Press force 16.1 to Press pressure 320 bar Juice yield up to 65% connection for juice drain 30mm High juice drain 480 mm High marc ejection 580 mm Supplied 1 press bag 60l, 3 inserts 38cm, 3 press inserts made of acacia wood 38cm ; New machine - best condition
used
Rated power up to 300 kg/h engine power press 1.5 (2.0) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50 Hz (3 phases) Electrical fuse 16 A Laenge 1200 mm width 1000 mm He 1880 mm Basket and juice tray in 1.4301 / AISI 304 press force 24.2 to Press pressure 380 bar Juice yield up to 65% Connection for juice drain 30mm High juice drain 525 mm Hoehe Marc ejection 585 mm Supplied 1 press bag 100l, 3 insert huellen 48cm, 3 Press inserts made of acacia wood 48cm ; New machine - best condition
used
- replaceable stainless steel sifties for adjusting the grinding unit - food-grade - self-sufficient use or mounted directly on pre-basket presses nominal power up to 650 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A La 496 mm width 434 mm He 885 mm He he with frame 1360 mm Hehe Assumption 1360 mm Weight 28 kg weight (without / with frame) 28 / 42 kg material 1.4301 / AISI 304 Hoehe mash release 690 mm Supplied cutter 8mm ; New machine - best condition
used
- Adjustment of the grinding unit - for the crushing of various fruit varieties food-grade nominal power up to 1000 kg/h engine power 2.2 (3.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 532 mm width 519 mm 1151 mm Hehe with frame 1532 mm He he Assumption 1532 mm Weight 45 kg weight (without / with frame) 45 / 59 kg material 1.4301 / AISI 304 Hoehe mash release 666 mm Supplied New machine - best condition
used
- for the production of mash - easy operation and easy cleaning nominal power up to 4200 kg/h engine power 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Laenge 7 30 mm width 690 mm Hoe 1410 mm Height assumption 1410 mm Weight 88 kg material 1.4301 / AISI 304 Hoehe mash release 470 mm Supplied New machine - best condition
used
Properties: Used roller conveyor folding element from the manufacturer Interroll Condition: fully functional with traces of use Professionally dismantled and packaged Price per pc. Technical data: Dimensions of the flap Total length: 1,300mm Total width incl. feet approx.: 890mm Conveyor width: 660mm Min. height Top edge roll: 700mm Axis distance: 75mm Roll diameter: 50mm Incl. 24V- Motor In stock: 12 pieces Price per piece Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopic telescopic applications for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network o ...
used
<b>Technical data:</b> Manufacturers; Interroll Condition: Good (Used) Max Payload: 50Kg Belt speed: 1.0 m/s Stroke time: 0.3s Rated voltage: 24V/48V Drive motor and lifting motor Control: Multi Control <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopic telescopic applications for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Togethe ...
used
The generator is for a magnetic conveyor belt
used
Schraegaufzug SA200 with swivelr raetzmuehle RM2,2 - Use with or without raetzmuehle without conversion work possible nominal power up to 1000 kg/h motor power Elevator 0.37 (0.5) Muehle 2.2 (3.0) kW (PS) Electrical connection 400V 50Hz (Electrical connection 400V 50Hz ( 3 phases) Electrical fuse 16 A Laenge 2620 mm width 700 mm Height 2100 mm He he Assumption 800 mm Weight 185 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 internal connection for washing mm Supplied cutting sieve 9 and 16mm ; New machine - best condition
used
Wash waer WA LC40 with Raetzmuehle RM40 for belt press EBP420, EBP500, EBP580 rated power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2000 mm width 700 mm He 220 0 mm Height he acceptance 800 mm Weight 280 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inside connection for washing 2 outside He mash release 1250 mm High fruit delivery 800 mm 9mm and 12mm snow ; New machine - best condition
used
Wash wa lund WA LC40 with raetzmuehle RM40 for packing press 180p2 Nominal power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2000 mm width 700 mm Maximum 2400 mm Hoehe Assumption 800 mm Weight 290 kg material 1.4301 / AISI 304 Connection for cleaning 1/2 internal Connection for washing 2 unless He mash release 1460 mm Maximum fruit release 800 mm Scope 12mm Cutting sieve ; New machine - best condition
used
Rated power 3000 up to 8000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 3570 mm width 980 mm High sof 2570 mm 490 kg material 1.4301 / AISI 304 Connection for cleaning HD M22 x 1.5 or G 1/2 Ag connection for washing room 1/2 outside He he mash release 1460 - 1620 mm Height fruit delivery 1460 - 1620 mm ; New machine - best addition
used
<b>Technical data:</b> Manufacturers; Interroll Condition: Good (Used) Max Payload: 50Kg Belt speed: 1.0 m/s Stroke time: 0.3s Rated voltage: 24V/48V Drive motor and lifting motor Control: Multi Control 6 pieces in stock <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopic telescopic applications for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics ...