clamp former used for sale

Cast iron clamping cube - 5 sides Length 760 mm Height 455 mm Depth 610 mm T-slots numbers 5 T-slots T-slots dimensions 35 x 20 mm With a slight lack at the top side Weight approx 400 kg

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Span width: 19 to 38 mm -Dimensions: 175/80/H440 mm -Weight: 9 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -with chain: 1.3 m -Span width: 44 to 70 mm -Load capacity: 6300 kg -Dimensions: 300/460/H120 mm -Weight: 30 kg

Panel lifting clamp, sheet metal clamp, sheet metal claw, girder clamp, girder claw, sheet metal gripper, material gripper, material gripper -Sheet metal claw -Span width: up to 152 mm -Load capacity: 2500 kg -Number: 1x terminals available -Price: per piece -Weight: 29 kg/piece

Clamping bloc 1100 x 300 x 400 mm

Clamping bloc 1100 x 300 x 400 mm

Clamping bracket 500 x 460 x 1450 mm

Clamping bracket 500 x 460 x 1450 mm

Clamping bracket 1000 x 1200 x 1800 mm

Clamping bracket 1000 x 1200 x 1800 mm

length: 1800 mm width: 640 mm height: 500 mm

length: 1800 mm width: 640 mm height: 500 mm

length: 1000 mm width: 1000 mm height: 2000 mm

length: 1000 mm width: 1000 mm height: 2000 mm

length: 1100 mm width: 710 mm height: 810 mm weight: 1350 kg

length: 2000 mm width: 2000 mm height: 3000 mm weight: 8,2 ton

length: 2000 mm width: 2000 mm height: 3000 mm weight: 8,2 ton

length: 1500 mm width: 1140 mm height: 5000 mm weight: 4350 kg

length: 1500 mm width: 795 mm height: 3500 mm weight: 3350 kg

length: 1600 mm width: 1260 mm height: 900 mm weight: 1350 kg

Clamping bloc 2090 x 1145 x 880 mm

Welding edge former, edge former, edge chamfering machine TRUMPF chamfers of steel plates for weld seam preparation type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10mm Bevel angle: 30 Power: 2000 Watt Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30 bevel angles - regrindable butt steel for high tool utilization - several impact steels - Support plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thicknesses For bevelling straight and curved edges with at least 40 mm radius. For bevelling edges on flat and curved workpieces as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg; used

Clamping plate, clamping cube Clamping lot cast steel with rectangular grooves made of cast steel cast iron Length 2010 mm Width 750 mm Height 1000 mm- Block machined on all sides at an angle and in parallel- Rectangular grooves 102 x 43 mm- Heavily ribbed Weight: 2550 kg Area (1) = 2010 x 750 mm Area (2) = 2010 x 1000 mm Area (3) = 1000 x 750 mm good condition 2 pieces available per clamping cube; used

A vacuum former from the US company The Channel Letter Bender. The machine was bought in 2017 and has operated over the years around 30 hours, so it is practically brand new and is well maintained. All the technical specifications are in the PDF. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch )

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 118 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at th ...

all stainless steel die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1 litre speed up to ± 50 strokes / minute total power 7,67 kW air consumption ± 300 L / min. - 6 bar dimensions (l x w x h) : 2.650 x 800 x 2.100 mm weight 940 kg

wire diameter range: 2,5 - 6,0 mm wire feeding length: unlimited wire feeding speed: up to 36 mtr./min angle of bending: 0 - 340°; ready for operation

Folding former make RAS type 22.15Masch. -No: 35/3 built in 1971Profile height max.: 20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max.: 1.25 mmWorking speed approx: 14 m / minPower requirement: 2.2 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx: 326 kgWith- Rollers for Pitsburghfold 1mm- Sliding fold 0,5 - 1,5 mm width 29 mm- 7 pairs of rollsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal folder former make RAS type 22.15Fabr. -No: 155/6 year 1982Profile height max.: 20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max.: 0.5 - 1.25 mmSheet length: 300 mm - optionalWorking speed approx: 14 - 17 m / minPower requirement: 2.2 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx: 326 kgWith- Snap- Cam standing seamused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Dough pre-portioner 3 rolls dough strip former from Rijkaart with 45cm tape and roll width with large hopper.Machine is mobile on rollers, 400 volt connection.Machine is immediately available in the warehouse. 1x Roller 45cm wide large funnel on large rolls with a set-up completely made of stainless steel

all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control

Wire diameter: 16mm, number of stations: 5, length: 6700mm, width: 3800mm, height: 3050mm, including sound-proof cabin, straightener, chain hoist, sorting trough, dosing machine, oil mist separator and additional accessories.

Hopper capacity: 80l, starting width: 200-230mm, connected load: 1kW, length: 4500mm, width: 1100mm, height: 1733mm, weight: 1.1t.

Universal - folder former make RAS type 22.15Built in 1970Profile height max.:20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max .: 1.5 mmProfiling speed approx. 14 m / minPower requirement: 3 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx. 300 kgWith- Profile rolls for Pittsburg fold and standing seamused, from an operating resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal folder former make RAS type 22.10Masch. -No: 353/4 built in 1982for sheet thickness up to: 1.5 mmProfiling speed: 6.0 and 12 m / min.Number of reel stations: 7Drive power: 2.2 / 3.4 kWWeight approx: 490 kgOutside dimensions approx : 2160 x 710 x 1010 mmWith- 2 set of profiling rolls- Footswitch- larger table with stopsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal folder former make RAS type 22.15Mash. -No: 163/2Profile height max.:20 mmSheet thickness max .: 1.5 mmDrive power: 2.2 kWExternal dimensions: 1140 x 790 x 1210 mmWeight approx. 300 kgWith- Set of rollers for Eckfalz with Falzöffnerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

: gebraucht : 9697 : prompt, Zwischenverkauf v : USA : 2800 € : 1 : 0.8 - 1.25 mm : 2.2 kW : 1500 mm : 620 mm : 1150 mm : 284 kg 1 set of rollers for Pittsburgh fold 1 set of rollers for long fold Mounted on wheels no User manual DOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread diamter M8-M16 number of dies 5 number of stations (incl. cut off) 6 max. width across flats 24 mm output pieces/min 120 cutting length 19 mm press power 180 t

Max. sheet thickness: 1.5 mm steel 2 continuous stations (see video) Weight: approx. 500 kg

Max. sheet thickness: 1.5 mm steel 2 continuous stations (see video) Weight: approx. 500 kg

Universal Folding Former, Folder FASTI Type 81501 Fabr. No. 928151 015 Year of construction 1992 Sheet thickness max. 1.5 mm Sheet thickness min. 0.5 mm Number of roller stadiums 7 pieces Profile height approx. 20 mm Centre distance of the rebate shafts 100 mm Working height 900 mm Working speed 7 and 14 m/min. Motor power 2.3 / 3 kW (pole switchable) Mains connection 400 volts, 50 Hz. - two speeds via pole-switchable drive motor - Standard roller set No. 5 for single and double standing seam- Roller set No. 11 for folding seam- Center rollers for S-fold - Pair of rollers for the production of locking cams in a standing seam - Instruction manual with electrical plan Space requirements L x W x H 1500 x 660 x 1100 mm Weight 450 kg very good condition; used

Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device -Indramat: AC Servo Line Former from DMT CD320 cycle lathe -Type: NAM 1.2-15 -Item: 246506 K39/96 -Dimension: 325/105/H390 mm -Weight: 21 kg

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: AC Servo Line Former NAM 1.2-08 -Component: from a DMT CD 480 lathe -Dimensions: 320/105/H390 mm -Weight: 12.9 kg

Fold former, folding machine, form folding machine, profiling machine, profiling system -Transfer: in the current condition as seen -Machine: has no motor and is therefore sold as a spare parts carrier -Profiling stations: 7 pieces -Sheet thickness max: 1.5 mm -max web height: 20 mm -1x set of rollers: -Work shaft diameter: Ø 28 mm -Center distance of the working shafts: -vertical: mm -horizontal: mm -Dimensions: 1460/740/H1050 mm -Weight: 352 kg

Up to 40 mm material thickness 400 V Please include location and postcode inquire. VAT not deductible.

diameter range 10 mm number of dies 5 number of stations (incl. cut off) 6 max. width acros flats 13mm output pieces/min 150-200 cutting length 17 mm

diameter range 64 mm max. width across flats 56 mm max. outside dia. of round pieces 64 mm bar dia. 18-40 mm cutting length 20-72 mm output - pieces/min 140 number of forming stations 3 press power 230 t