cement used for sale

CEMENT PLANT BATCHING PLANT CONC. BATCH PLANT 210M3/HR-200KW BP210CMPH (Type I Portland Cement shall be used) Make: Hosan Engineering Co.,Ltd.Edit Make Model: HSBP-210MS Cement Plant control panel Silo tank- 2 units compressor water tank - 2 units Cement mixer Crusher plant Crusher 1 conveyor - 3 units crusher w/ wheels control panel Crusher 2 conveyor - 4 units crusher w/ wheels Control panel Concrete Hollow Block Plant Maker: Harex Eng’g Co. Ltd. Model: H212 mixer conveyor - 2 units Hollow block molder/press control panel Capacity: 210 m/ Hr Make: Hosan Engineering Co.,Ltd. Model: HSBP-210MS Capacity: 210 m/ Hr

Machinery and equipment for the production of cement, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own e ...

Production line for the mannufacture of sacks for cement and building material, consisting of one universal tuber 981, Gartemann + Hollmann, and two valve sack bottomers 525, Gartemann + Hollmann

a used cement silo Capacity approx. 85 m3 / approx. 100 tons good condition with filter and optionally with silo control from the Meiningen location / in the current state All prices net, ex location, without guarantee and/or warranty, errors and/or errors reserved, subject to prior sale. Sale is in the current state, as offered - lying and/or standing. The reproduction, publication and/or copy of this offer by third parties who have not been expressly authorized in writing is strictly prohibited!

cement mixer, mixing device, laboratory mixer PLATTENWERK EULA Type: ZMM 5 approx. 32 / 64 rpm ( counted ) Operating voltage: 380 V 3AC Power: 0,0,0,0 4 kW Mixing drum volume: approx. 4.4 litres Drum diameter: Ø 262 / 270 mm ( inside / outside ) Drum height: 86 / 96 mm ( inside / outside ) geared motor: VEM ZG0 KMR 71 G8-4 ( ZG0KMR71G8-4 ) 0.22 / 0.4 kW 63 / 125 rpm 380 V 3AC 50 Hz approx. 2.5 m connection cable used, tested ! Dimensions: 700 x 285 x 215 mm

1 piece used Double chamber cement silo Volume approx. 60 tons (30/30) in good condition completely as shown including base frame Location: near Brandenburg Price on request without guarantee and/or warranty; Sale takes place ex location in the current condition, as it is and/or stands; Errors and/or misrepresentations excepted, subject to prior sale

Description: • Cement silo trailer • Spanish registration number: R 8170 BCY • Frame number NP9GLS3VSHA198006 • 3-axle • WABCO EBS pneumatic dual circuit brake system • Compressor with DEUTZ diesel engine • Maximum total weight 24000 kg • Ownership change costs will be paid by the buyer • MOT certificate costs will be paid by the buyer • The buyer is responsible for passing MOT in order to circulate in Spain • IMPORTANT: • The buyer is responsible for everything related to the loading of this equipment • Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities). Approx. Onsite Dimension. (l x w x h): 10,400 x 2,700 x 3,920 mm, weight approx.: 8,000 kg

Description: Tracked cement shredder, equipped with 14 hp diesel engine, maximum demolition size 300 x300, capacity 10 ton/hour https://www.youtube.com/watch?v=PD1_-wGpdiA Approx. Onsite Dimension. (l x w x h): 2,800 x 760 x 1,500 mm, weight approx.: 1,500 kg

Silo Manufacturer Mahr GmbH - Plants for bulk solids Year of construction 2006 Capacity 140m³ Medium cement 1,3kN/m³ Mixing plant optional

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...

Dismantled CONCRETE PLANT Easy to operate and ready relocation. Horizontal concrete plant type «ROME CZ 5P24B» with a capacity of 65 m3 / h of fresh concrete or 45 m3 integrated vibrated concrete with additional equipment + heating system ACV. The concrete unit consists of units: - storage boxes for gravel 5 units 150m3/unit (galvanized version), - vibration system, mounted on two outlet cones each consisting of a 260 W vibrator mounted on a special plate with all the necessary electrical equipment - scale for gravel, 4 units, maximum load capacity 2400 kg, 12m3 geometric volume each, vibrator 180 W - scale for cement, maximum load capacity 600 kg, 3 units weighing cells, EC certificate, volume of the bunker 480 L, pneumatic hood fi 323 mm, pneumatic vibrator VPC 1 piece - compressor and pneumatic equipment, volume 270 L, air flow 462 l/min, compressor 3 kW - planetary m ...

TECHNICAL SPECIFICATIONS (Cone Mixer) Manufacturer: KNIELE Name: Cone Mixer Type: KKM 2000 / 3000 Version: with bevel gear Year of construction: 2008 Output quantity: 2.0 cbm Capacity: 3,000 l Three-phase motor agitator inside: 45 kW Three-phase motor agitator outside: 37 kW Mixer lining: Ceramic Mixing system for ready-mixed concrete consisting of: - KNIELE Cone Mixer KKM 2000 / 3000 - Elevator system with bucket - Feeder scale - Cement scale - Water dosing system - 1 x 100 t cement silo (double chamber) - 1 x 80 t cement silo (double chamber) - 1 x 60 t cement silo (double chamber) SPECIFIC COMMENT - Aggregate storage for the most part no longer usable - Machines will be dismantled in the near future and ready for loading If you are interested, we can send you a more detailed offer with photo documentation. EuroConsult Dimitrios Piretzidis

TECHNICAL SPECIFICATIONS Manufacturer: LIEBHERR Description: Semi-Mobile Concrete Batching Plant Type: Mobilmix 2.25R DW Year of construction: 1998 Mixer Nominal Size: 2.25 cbm Throughput (at 30 s mixing time): approx. 100 cbm/h Number of cement silos: 3 pcs. Cement silo capacity: 3 x 80 t (1 double chamber) Number of cement augers: 4 pcs. Pocket row silos: 6 bags (4 x 17.5 cbm, 2 x 35 cbm), Capacity of row silo: 140 cbm Concrete discharge height: 4.0 m Weighing belt maximum load: 6,000 kg Cement scale maximum load: 1,200 kg Spirit level: 600 kg Additive dosage: 25 kg Control: LIEBHERR Litronic (in container) Heating system: Heating oil Recycling plant: FMW Operating voltage/frequency: 400 V / 50 Hz

Pipe screw, screw conveyor, cement screw, dosing screw used for cement, fly ash, sand, lime, cereals or similar materials Conveying length (from inlet to outlet): approx. 2.5 m Diameter Ø: approx. 260 mm Slope approx. 120 mm Spiral height approx. 90 mm Spiral plate approx. 8 mm Inlet / outlet: approx. Ø 260 mm Remote storage with stuffing box Drive with gear motor 4 kW 68 rpm Total dimensions: approx. 3700 x 450 x 550 mm Due to the stable construction, the screw is suitable for abrasive substances. Thanks to our own special machine construction, changes can also be made. We have various pipe screws in different lengths, slopes and diameters from a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers... Changes and errors in the technical data, information and prices as well as prior sa ...

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

THERMISCHE REINIGUNG PYROLYSE-OFEN Zykluszeit : 2 - 4 Stunden Beschickung : Wagen, manuelle Beschickung Isolierung : Keramikwolle + Steinwolle Dicke der Isolierung : 175 mm Höchsttemperatur : 1.260˚C Heizungsart : Direkt beheizt Heizquelle: Erdgas, Flüssiggas oder Diesel Brennkammern : 2 Sätze Überhitzungskontrolle : Wassersprühdüsen - 2 Stück Sicherheitskontrolle : Wassersprühdüsen - 2 Stück Backofen-Sicherheitstür : 1 Satz Schaltschrank : PLC-gesteuert, Schaltgeräte der Marke Schneider Electric Steuerungssystem : Bedienfeld mit Touchscreen und Softwaresystem MATERIAL Ofengehäuse : Stahlkonstruktion und Blech, spritzlackiert 1. Brennkammer: Schamottestein und feuerfester Zement, 1.400˚C 2. Brennkammer: Schamottestein und feuerfester Zement, 1.260˚C BETRIEBSTEMPERATUR 1. Brennkammer: 250 - 600˚C 2. Brennkammer: 800 - 1.100˚C Durchmesser  ...

- n.10 iron elements including gratings, gratings and more for scrap; elements for air conditioning system; n.1 low steel cabinet with doors Sliding; n.3 pallets of gypsum tiles 500x750 mm; n.10 ad polystyrene arch for concrete castings; n.10 pallets of various bricks including piñatas for floors, tiles, bricks, poroton type blocks of various measurements, type and Marseille tiles; n.3 pallets of tiles for internal/external mm 150x150; n.3 pallets of curbs, both straight and curved for sidewalks; n.1 igloo pallet for ventilated floor; n.4 pallets of self-locking grey concrete of various shapes and thicknesses; n.2 pallets of grey concrete blocks of various thicknesses; n.1 pallet of Cement roof tiles of various colours double Roman type - DEPOSITED IN OVANENGO (BS) - n.5 pallets of self-locking of various shapes and sizes; n. 3 baskets of Horizontal and vertical r ...

1 piece of used and insulated double chamber silo e.g. for storing cement, microsilica or Stabilmac Capacity 60 to (50m3) double-chamber version, with double partition/insulated! Outlet flange height to lower edge of rotary flap closure 1675 mm Silo diameter 2900 mm Cone inclination, pipe-shaped 60°, (no cone plate) filling pipe diameter 100 mm including - 2 injection pipes up to 1300 mm above the road with B fixed couplings - 2 control openings - Connection flanges for silo fill indicators, exhaust air filters and cement loosening - 2 silo baromats (over- and under-pressure protection) - railing (galvanized) - 2 rotary flap closures on the outlet cone (DN 250) - 2 note boxes. INSULATION of the 60 t silo (roof, cylinder and cone) consisting of: Mineral wool, 80 m and with cover plate For an additional charge: 2 pieces of suitable screw conveyors Location: S ...

Liebherr Betomix 2.0 Z, capacity 90 cbm/h, mixer type Liebherr RIM 2.0 with ceramic tiles and rotor was overhauled in 2022, SPS RIEGER DIDO WIN, Mesomatic displays installed in a container, storage tower 240 t capacity with 6 boxes, 2 x 80 t cement silo, 1 x 100 t cement silo, 1 x 100 t double chamber silo, elevator with feed hopper, Hot air heating and hot water preparation KROLL, etc

An overhauled mobile concrete batching plant Incl. warranty Manufacturer: Stetter Type: M1 TZ Overhauled in: 2023 Power: 56m3 Row silo/bag feeder 4 X 10 m3, total 40m3 Mixers: Plate mixer , Stetter , hardened concrete output 1.00 m3 Dosage: Surcharges with bucket weighing 2500kg Cement scale 500 kg Spirit level 250 kg Additive scale 1 X 12.0 l Control: GEDIS IBS 33 W (Optionally installed in container) Cement silo: Optionally possible Enclosure: Optionally possible Delivery time: according to agreement Delivery free construction site possible Installation and commissioning possible by us Price on request Offers and prices are net ex location. Subject to prior sale, subject to errors and/or misrepresentations, without guarantee and/or warranty, sold in ACTUAL condition - lying and/or standing

TECHNICAL SPECIFICATIONS Manufacturer: WIGGER + CO / KABAG Designation: Concrete batching plant with row dosing unit Version: Stationary Type: CENTROMAT EC 55 - CCSI Year of construction: 1992 Throughput: 55 cbm/h Control system: CCSI for 200 concrete recipes Mixer: HPGM 1500 Planetary Counterflow Drive power mixer: 45 kW Dry filling: 1,500 l Hardened concrete output: 1,000 l Row silo, 4 chambers: 2 x 40 cbm / 2 x 25 cbm Collection belt AA: 19,500 mm Collection belt BB: 650 mm Cement silo 01): 64 cbm / 80 t Cement silo 02): 42 cbm / 50 t

ID2788 Normet Injection & swap body for maintenance Normet undercarriage NT60 (generally revised), with 2 swap bodies (for injections with cement silo body (generally overhauled) & swap body for maintenance in the tunnel (new) (i.e. the swap body "maintenance unit" is necessary for supplying and maintaining the equipment, e.g. in tunnel construction. These are included Oil barrels, a 1000 liter diesel tank, an emergency generator, a workshop compressor and hose fittings, like at the gas station to fill up the devices with diesel or to refill oil). The maintenance unit is brand new and built as a swap body. Standardet undercarriage NT60 (completely overhauled), with 2 swap bodies (for injections with cement silo superstructure (refurbished) & interchangeable body for maintenance in tunnels (new) (i.e. the swap body "maintenance unit" is necessary for the supply and maintenance of the e ...

For Sale is a ACOTEC Production Line Manufacturer: ELEMATIC Output: 160 m2/h (double line) Year: 2019 This offer comprises 2 ELEMATIC production lines with a combined capacity of 160m2/h and also includes a FRUMECAR batching plant. Acotec panels are precast, non-load bearing partition walls. They are room-high and 600-mm wide, with a tongue and groove design along the vertical edge. The panels are 6 times faster to install than traditional brickwork and twice as fast as blockwork. Modules list of the production plant -Concrete Supply -Plate Handler -Plate Feeding Conveyor -Casting Module -Product Module 6/100 -Saw -Conveyor for Saw -Trimmer -Product Conveyor -Recycling -Stacker -Stack Conveyor -Stack Return Conveyor -Crossing Station -Restacker -Product Tilting Receiver Conveyor -Product Tilting Device -B-Quality Conveyor -Pallet Conveyor -Cleaning  ...

Cement different quality and country of manufacture. All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own ...

Used Makrum cone crusher company, type 44.51. Available 2 pieces. In addition, two new cones. Cone crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, diabase, quartz, limestone, sandstone, cement clinker. These materials may not may not have a clay-clay impurities in an amount greater than 5% and a humidity of more than 10%. Crushers are used to prepare the materials for the construction of roads, railway embankments, as well as pre-grinding materials, subject to further processing in other devices, eg. In mills. Hydraulic cone crushers have internal support team cone crushing. Adjusting the exit slot is controlled hydraulically, and read from the console. Hydraulic overload protection automatically disappearance of the inner cone and its return to the original position after the resignation of overload.

Dynamic airflow separator (sifter) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel occupied with 64 blades / turbine blades, outer ring occupied with 36 manually adjustable counter wings, incl. drive. In very good condition.

Used jaw crusher Makrum company, type 40.17 Specifications:   1.Wielko inlet -800x1000 mm.   2. The adjustment range of the gap outlet - 80/18 mm.   3. Max. the size of the input material - 750 mm.   4. Performance - 35-90 m3 / h   5. The power of 75 kW drive motor.   6. The weight of the largest unit 14 T.   7. Weight crusher 38.1 T. Jaw crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, quartz, glass cullet, limestone, sandstone, cement clinker, etc. These materials may not have a clay-loam dirt more than 5%, and humidity more than 10%. Wide range of sizes crushers and their technical parameters allow you to apply them in different nodes crushing - from the initial node crushing until the final product.

High-efficiency dynamic classifier (separator) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel equipped with 64 blades, outer ring equipped with 36 manually adjustable counter-blades, incl. drive. In very good condition.

Sharping machine for endless abrasive belts. The subsequent endless abrasive belts be sloping ground at the various stations. At the last station of the contact cement is then applied.

1 used and professionally dismantled cement conveyor screw type ELBA BZL 80/100 , built 1995, engine and gearbox New 2020, AA approx. 8.50 m, 1 spare piece 3.0 m, disassembled and cleaned Errors and intermediate sale reserved, sale from stock

The fully automatic robotic palletizing system is designed and manufactured by our company. Palletizing systems with robots are able to meet the needs of a very diverse sector. flour factories, Animal feed factories, fertiliser factories, cement factories, Construction chemicals plants, Legume factories, Packaged products, bagged products, Transportable Features & Benefits : • Faster palletizing, • Standard number of pallets, • labour, energy and time saving, • Correct placement by automatic tolls, • With the appropriate design of the loading sequence, high robustness on the pallet, • Arrangable in various configurations; rows of pallets with free programming, • 400-5000 package/hours performance, • From 5 to 50kg standard packages, • Space required for installation is small and flexible, • User-frien ...

Mobile concrete batching plant, SUMAB K-60 Technical details: • 4 total storage tanks with 3.8 м3 each, with the possibility of increasing storages to 5 m3 • Pan mixer 1800/1200 litres, coated with 12 mm layer of special steel. • Automatic control for opening the damper supply for precast concrete. • 5 mixing arms. The special arrangement of the arms in the pan mixer allows all the parts of the mixer to be covered during the batch, which means that a high-quality concrete product is achieved. The K-60 Mobile concrete plant features a comfortable control cabin that allows for the automatic control of the system. The modern Siemens computer system enables you to produce over 100 recipes and types of concrete. You can print the specifications of any mix of finished batches in kilograms and percentages to prevent cement or aggregate theft while making a concrete mix. Adva ...

Includes aggregate weigher, cement weigher, water weigher, additive weigher, special material weigher, Schlossermixer and Biotronik control system, documentation available, on-site inspection is possible.

TECHNICAL SPECIFICATIONS Manufacturer: AMMANN Designation: Twin-shaft compulsory mixer Type: MB 3.0 Year of construction: 1997 Batch size hardened concrete: 3.0 cbm Batch size fresh concrete: 3.6 cbm Drive power: 2 x 75 kW SPECIFIC COMMENT Incl. associated components: - Cement scale - Aggregate scale - Discharge funnel - Discharge hopper small quantities - Water dosing system

1 semi mobile concrete batching plant Producer: Tublorom Type: tublomix M C 1TZ YOC: 2022 capacity: 56 cbm/h working hours: 0,0 Mixer: pan mixer - Stetter 1,0 m3 Storage bins / compartment batcher: 4 aggregate inters per 10cbm (Total 40 cbm) Silos: Optional 2 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional Silo equipment: 2 complete sets for 2 silos (filter, screws, etc) cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 460 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the selling object and of reference tublomix plants  ...

1 semi mobile concrete batching plant Producer: Tublorom Type: tublomix M 2,5 TZ YOC: 2022 capacity: 112 cbm/h Mixer: Stetter twin shaft mixer - Stetter DW 2,5 Mixer cleaning system optional possible Storage bins / compartment batcher: 4 aggregate inters per 17,5 cbm (Total 70 cbm) Silos: Optional 2 – 5 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional Silo equipment: 2 complete sets for 2 silos (filter, screws, etc) cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 550 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the s ...

1 semi mobile concrete batching plant Producer: Tublorom Type: tublomix M3 ILS YOC: 2022 capacity: 135 cbm/h working hours: 0,0 Mixer: Stetter twin shaft mixer – Stetter DW 3,0 Mixer cleaning system optional Storage bins / inline silo: 6 bins = 2 x 30 m³ + 4 x 15 m³ (total 120 m³) Silos: Optional 2-6 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 460 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the selling object and of reference EASYBATCH plants by appointment p ...

Gebr. Mixing plant / tower plant Fabr. Krupp, control company Dorner, 1 x mixer THZ 3000 Teka, 1 x mixer THZ 1000 Teka, with 4 cement silos, hot water supply via biomass heating possible, aggregate storage in the tower, Feeding via elevator/vibrating chute and distribution belts, recycling plant with two separate agitator basins

Henke Variant concrete block production plant, core and attachment Complete with lifting ladder, lowering ladder, vehicle group, drying rack, mixing plant, core and attachment mixer, aggregate silos, cement silos. The facility is very well maintained and ready for immediate use and can be visited at any time in consultation with us. For more information, please do not hesitate to contact us.

2 pieces used MOBILE CEMENT SILO Brand: NORMANN BOCK Type: WS-22,5 YEAR: 1994 Volume: 22m3 Immediate available location: Wittenberg/Germany price on request offer and all price are net and ex stock, without guarantee and/or guarantee, mistakes and/or false representations reserve, subject prior sale selling in current state / how is it – standing or recumbent,

Code: 0239 Brand: SCM Model: D/80 Automatic double end tenoner with 10-groups (5+5) for furniture, doors, window frames, panels, prefabricated panels, tables, cladding, prefabricated houses, fibre cement, plexiglass and various Technical data: Working length mm 3200 Min working length on 1 track mm 75 Min working length on 2 tracks mm 150 Working height mm 180 Adjustable feed speed from 5 to 30 mt/min Heavy cast-iron structure Rubber-coated tracks Track lubrication unit Composition: Automatic scoring unit - Motor Hp 1,5 Hogging unit - Motor Hp 8/12 Automatic Spindle moulder unit - Motor Hp 6,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 5,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 7,5/9 - Rpm 3000/6000 - Shaft diameter mm 40 Overall dimensions for transport: Machine mm 4800 x 2400 x 1700 h + Shoulders (tr ...

oven 850 t max 800 C with air circulation inner dimensions 1x1x2m (possible various size) PLC Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce ber ...

Oven 450 inner dimensions 2x2x6m PLC Uterna / Europe custom made oven Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammeröfen Haubenöfen Drehherdöfen Thermische Nachverbrennungsanlagen forno a camera per trattamento termico alluminio forno a carro per trattamento termico alluminioforno a carro per trattamento termico alluminio forno a carro per trattamento termico alluminio forno continuo per trattamento termico alluminioforno continuo per trattamento termico alluminio forno continuo per trattamento termico alluminio linea batch per trattamento termico alluminiolinea batch per trattamento termico aliuminio forni industriali da  ...

HEF Durferrit Line - carburizing, quenching and tempering Nitrocarburizing in a salt bath and hardening of steel parts. Technology for saturation in a liquid medium of cyanide salts, consisting of: -SWQ 60/80/90 and - Salt bath for quenching and tempering -STC 35/80- Electrode furnace for carburizing, hardening and annealing -LSU 60/70- Salt bath for carburizing, hardening and annealing In this technology, the surface layer of the materials is saturated with small amounts of nitrogen and carbon in a temperature range from 480 ° C to 630 ° C. Bath size - 350 x 800 mm Basket size – Ø 300 mm x H 300 mm Saturation of the surface layer with carbon and nitrogen at a depth of 0.4 ÷ 0.6 mm Hardness HRC 64 ÷ 66 Maximum dimensions of details for cementation: Lmax = 550 mm, Ø 300 mm

Oven 650C inner1.5x1.5x2m t max 650 Celsius could be various inner size and temperature range PLC Top quality Wärmebehandlungs Kammeröfen Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken- und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haub ...

Oven 700 1.3x1.3x1.5m Auto door PLC top quality Giessereianlagen Giessereimaschine Giessereimaschinenbau Giessereitechnik Giessereizubehör Glasschmelzöfen H aubenöfen Herdwagenöfen Hochtemperaturöfen Induktionsanlagen Industrieöfen Industrieofenanlagen Industrieofenbau Kammeröfen Keramikbrennöfen Kippofen Kupolöfen Laboratorien Laboröfen Lötofen Maschinen Muffelöfen Nachverbrennungsanlagen Öfen Ofenanlagen Ofenbau Ofenbauzubehör Prozessanlagen Prozesssteuerungssysteme Pyr lyse Pyrolyseöfen Regelungstechnik Retortenka meröfen Retortenofen Rohrofen Salzbadöfen Schmelzofen Sinteröfen Thermoprozessanlage Thermoprozesstechnik Vakuumglühofen Vakuumkamme fen Veraschungsöfen Versuchsofen Vorwärmofen Wachsausschmelzverfahren Wannenofen Wärmebehandlung Wärmebehandlungsöfen Wärmebehandlungsverfahren Wärmerückgewinnungsanlagen Warmhalteofen Poreba Gurut ...

furnace 1200 Temperature range 10 - 1200C inner chamber dimensions 1x1x2m (possible various size) Auro door PLC Termička obrada metala, cementacija, kaljenje, poboljšanje, žarenje, otpuštanje, normalizacija, ispravljanje ručnom i hidrauličnom presom, plameno kaljenje Jamske peći sa zaštitnom atmosferom Za jamske peći sa zaštitnom atmosferom se koriste elektrootporni grejači i gasni gorionici. Mogu obavljati sledeće termičke obrade: Žarenje kaljenje otpuštanje poboljšanje rekristalizacija normalizacija Upoznavanje sa klasičnim i novim postupcima termičke obrade metalnih materijala kao što su odgrevanje, difuziono žarenje, heterogenizacija, rekristalizaciono žarenje, potpuno žarenje, meko žarenje, izotermalno žarenje, normalizacija, kaljenje sa i bez polimorfnog preobražaja, starenje i otpuštanje, sa posebnim osvrtom na postupke termohemijske obra ...

oven 650 Injection Mould Mold furnace temperature range 10 - 650 Celsius 1x1x1m (various possible) Kammertrockenöfen Kammertrockn er Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Tro ckenöfen Trockn er Trockneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen temperaturi te polaganim hlanenjem. Na ovoj povišenoj temperaturi u materijalu nastaju plastične deformacije te se unutarnja naprezanja izjednačuju. Nitriranje je postupak sličan je cemetiranju, gdje se površina dovodi u kontakt sa strujom dušika koji se veže sa željezom te tvori vrlo tvrde kristale željeznog nitrida (Fe4N). Ovako dobiveni površinski sloj vrlo je tvrd i otporan na trošenje. Nitriranjem se povečava dinamička čvrstoćai otpornost prema  ...

Furnace 1200 temperature range 100 - 1200 Celsius inner dimensions 1x1x2m power 50kW PLC could be various size industrijskih peći INDUSTIJSKIH PECI NIKOTIRANJE CEMENTIRANJE TERMIČKA OBRADA ČELIKA KALJENJE INDUKCIONO PLAMENO ALATNIH I KONSTR. ČELIKA ŽARENJE MEKO NORMALIZACIONO STABILIZACIONO CNC obradni centri za struganje Završno precizno struganje Brušenje nakon termičke obrade, Zatvaranje tolerancija - lanci mjera, Kombinovani postupci struganja i glodanja, Dijelovi za automobilsku industriju i industriju mašina od čelika obojenih metalą CNC 3-osni obradni centri, Konvencionalno glodanje za pripremu i doradu, Kombinovano CNC struganje i glodanje, Zat varanje tolerancija - lanci mjera, PEĆI ZA TERMIČKU OBRADU ZAŠTITNE ATMOSFERE PEĆI ZA TERMIČKU OBRADU SA ZAŠTITBNOM ATMOSFEROM NITRIRANJE,CEMENTACIJA, POBOLJŠANJA, ŽARENJA, CARBONITRIRANJE NITROKARBURIRANJ ...

For extruders 500 to 1500 kg/h Supporting structure made in sturdy steel with sides made in special alloy. Group of dandy rolls to guide the streams Lower roll in cemented steel Upper, pressing roll made in nitrated steel, pneumatically lfted Asynchrone drive with inverter Cutting unit with dual cutting edge Made in anti-wear steel Electrical control panel with general switch,service switch and amperometer Adjustable speed Rotor diam. 240 mm. N.28 teeth on rotor Counter-blade length 350 mm. 2 cutting edges, 11 kw drive Include n.1 extractor, User’s manual, CE compliance