cavit edm used for sale

Manufacturer: PCM Moineau Model: 13IVA10 Year: 2019 Type: Progressive cavity pump Transfer of viscous, heterogeneous and pasty products. Motor power : 4 KW Nominal flow rate : 2 m3/h Max pressure : 10 bars Nominal pressure : 5 bars Speed : 240 rpm Suction hopper Feeding screw

Manufacturer: PCM Moineau Model: MR6H12 Year: - Type : Progressive cavity pump Motor power : 0,75 KW Nominal flow rate : 1.2 m3/h Pressure : 8 bars

Manufacturer: PCM Moineau Model: MR2.6L10 Year: - Type : Progressive cavity pump Motor power : 0,55 KW Nominal flow rate : 0,75 m3/h Pressure : 5 bars

Used eccentric screw pump Type: NM090SY02S12B Machine number: 355339 Built: 2004 Flow rate: 18/36 m3/h Pressure: 10 Bar Speed: 125/150 rpm pol switchable in 2 stages

Used eccentric screw pump Netzsch Type: NM090SY02S12B Machine number: 355338 Built: 2004 Flow rate: 18/36 m3/h Pressure: 10 Bar Speed: 125/150 rpm pol switchable in 2 stages

Used eccentric screw pump Allweiler TYPE: AEB2EN100-IE/011G0X Machine number: 7207538/1 Built: 2000 Q (Quantity): 8.3 / 100 l/min N (speed): 73 /457 rpm

Used eccentric screw pump Allweiler TYPE: AEB 2 EN 100 - IE/011G Built: 2001 Q (Quantity): 8.3 / 100 l/min N (speed): 73/457 rpm Machine number:7209145/2

Used eccentric screw pump Bornemann E2H 1024 Built: 1993 Power: 4 kW Voltage: 400/690 V Flow rate: 10 m3/h Speed: 370 rpm Viscosity: 10000CST Conveyor pressure: 2 bar Suction flange: DN80, top Pressure flange: DN65, axial Manual: yes Machine number: 329495

Used eccentric screw pump Nemo pump unit 4NE15A Built: 1997 Design: IMB3 Power: 0.75 KW Voltage: 230/400 V Speed: 624 rpm Machine No.: 284285 Direction of rotation: to the left, seen on drive shaft

Used eccentric screw pump SMI - Ruhr pumps Series: SMI Size: 150 Year of construction: 2003 Capacity: 150 m m³/h maximum

Attachment: eccentric screw pump used Manufacturer: Allweiler Series: AED 1E 4250 Year of construction: 2000 Working temp.: approx. 20 ° C Viscosity at tA: approx. 500 mpa.s Density at tA: approx. 1.0 kg / m³ Pressure in the pressure connection: 2-6 bar Speed: 62-310 1/min Flow rate: 30-180 m, m³/h Engine capacity: 45.0 kW

Blowing moulding machine SIPA 4 cavities • Year: 1998. • Speed: 4.000 bph. • Model: SF 8/4. • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections.

Excenter cavity pump Manufacturer : Car Model : KL 30S-60.0 with electric motor Manufacturer: SEW Type: RF77 DV132M4 The device is NEW and fully functional, for more information see pictures.

With cryogenic cooling system, was maintained regularly, including spare parts and extensive documentation.

There are nine pumps available (1) Seepex BN17-12L, power: 5.5kW, year of construction: 2004 (2) 2x Seepex BN17-6L, power: 5.5kW, year of construction: 2006 (3) Netzsch NE60, power: 3.6kW, year of construction: 1978 (4) Flux F550 SF-54/26-TR with motor (5) 2x Flux F550 SF-54/26-TR, with and without motor (7) RUVAC WA501 2008 (8) RUVAC WA 2001, with kneader and cartridge separator.

progressing cavity pump with motor FIRE EXTINGUISHING EQUIPMENT PLANT JÖHSTADT AM9-32/40/4.2Cr V: 0.96 m3/h h: 40 m engine: 0.55 kW 220 / 380 V New ! Dimensions: 790 x 2000 x 250 mm

Allweiler GmbH cavity pump, type: AEB 1E 380, number: 17004647, year of construction: 2017, dimensions: 1370 mm x 230 mm x 300 mm.

Generator: MGF max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero

Generator: MGF2 max.travel range : X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode / parts changer: Erowa UPC 5 position, ITS 72 - 90 position, ITS 148 - 15 position cooling device for dial

Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode / parts changer: Erowa UPC 5 position, ITS 72 - 90 position, ITS 148 - 15 position cooling device for diale

Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er

Generator: MGF2 Max. Travel range: X 450mm, Y350mm, Z 350mm, C yes Clamping of tool: Erowa System ITS Clamping of parts: Erowa Sysem UPC Electrode / parts changer: Erowa UPC 10 position, ITS 72-90 position Cooling device, fire extuiguishing

Generator: MGF max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts: Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Erowa ITS / UPC Er

Wire EDM AGIE CHARMILLES CUT 30P Used machine in excellent condition Year 2010 dimension table 950 x 630 mm working tank 1260 x 945 x 675 mm max size piece 1050 x 850 x 350 mm max size weight 1000 Kg. Axis X 600 mm Y 400 mm Z 350 mm U 100 mm V 100 mm Operating System Windows XP Overall dimension 3100 x 2800 x 2325 mm

Year of manufacture 2001 generator multi pulse - 70 amp + 100 amp booster Control Mitsubishi 32 bit - CNC travel (X, Y, Z) 900 x 1,780 x 550 mm Bowl (W x D x H) 1300 x 2200 x 730 mm workpiece clamping table (B x T) 1150 x 2050 mm accessories 13-fach pick-up linear changer, CO2 fire extinguishing status completely overhauled

Year of manufacture 2000 generator 70 amps - multi pulse control Mitsubishi - 64 bit CNC travel (X, Y, Z) 700 x 1350 x 500 mm Bowl (W x D x H) 1000 x 1600 x 550 mm work table (B x T) 900 x 1500 mm capacity 3000 kg accessories 10-speed pick-up linear changer CO2-Fe uerlöschanlage, cartridge filter system, programming station software MultiProg obsolete status, available from February 2018

Year of manufacture 2002 Generator 70 amps, multi pulse control Mitsubishi - 64 bit CNC travel (X, Y, Z)) 525 x 400 x 450 mm Bowl (W x D x H) 750 x 650 x 420 mm workpiece clamping table (B x T) 730 x 630 mm electrode changer 20-fold pick-up plate changer accessories CO2-Feuerloeschanlag e, integr. Cartridge filter system status complete overhaul.

Jig

EDM machine - X: 500 mm - Y: 295 mm - Z: 385 mm - C-axis: 360° - Clamping area: 780 x 500 mm - Spacing table - Pinole: 285 - 660 mm - Workpiece weight: 1200 kg - max travel speed X,Y,Z: 600 mm/min - Clamping system: EROWA - C-axis measurement resolution: 0.001° - Electrode changer: 16 -fold - Electrode changer: pick-up - Electrode weight: C-axis 20 kg - max. single electrode weight: 5 kg - Electrode changer total load: 40 kg - Dielectric cooler - Dielectric filter candles: 3 pieces - Dielectric filling height: 345 mm - Dielectric capacity: 450 l - Dielectric aggregate: separate - Generator: 30 A A - Control: EROCOM 200 - Fire extinguishing system - Total power: 8 kW - Machine weight: 4400 kg - Space requirement (W x D x H): 2.2 x 3.3 x 2.4 m - Condition: very good Details tested by Maho technicians, ready for demonstration under electricity, instru ...

Precision Die Sinking Machine Fabr. MD PRONTO Dieburg Type 50.35Fabr. -No: 0-1.9.7, built in 12/1990Work table length x width: 650 x 350 mmMax. Workpiece dimensions Length x width x height: 900 x 550 x 400 mmTravel across X: 350 mmTravel length Y: 300 mmVertical travel Z: 180 + 200 mmMax. Travels of work table and machining head: 450 mmMachine weight approx. 1300 kgrequired footprint: 2700 x 1550 x 2450 mmExternal dimensions of the machine: 1280 x 1300 x 2100 mmTank size: 1100 x 550 x 400 mmTank volume: 240 l:With- Digital display- Depth shutdown- CO2 fire extinguishing system Gloria- Clamping system Hirschmann- separate power supplyas new, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available ...

CNC EDM machine make INGERSOLL type IC 112Fabr. -No: 571085 Year 1985Table surface: 700 x 440 mmLoad capacity: 1000 kgTravel X: 450 mmTravel Y: 350 mmTravel distance Z: 350 mmWorking head: 205 x 205 mmHead load: 600 kgErosion load limit: 400 kgPinole diameter: 120 mmclear width head - table: 300 - 650 mmDrive: servo-hydraulic.Work container size: 960 x 650 x 400 mmCapacity: 230 lFeed rate in 3 axes: 600 mm / minHydraulic capacity: 40 lOperating current: 35 ASupply voltage: 380 V, 50 HzConnected load: 5 kVADimensions L x W x H: 2885 x 2000 x 1950 mmWeight approx. 2200 kgVolume of flushing pump: 25 l / minDelivery volume of filling pump: 130 l / minTotal amount of dielectric: 400 lFilter area: 4 m / 2With- Control type M 60 D Rotron 3 T Heidenhain ME 102used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.T ...

CNC EDM machine Fabr. AGIE type Agietron 200 CSeries 03, device 04, list of devices 356804.5 built in 1987Travel X: 500 mmTravel Y: 350 mmTravel distance Z: 500 mmSupport surface: 800 x 630 mmMax. Workpiece dimensions: 1000 x 700 x 320 mmInner container dimensions: 1070 x 740 x 420 mmWorkpiece weight approx. 1200 kgMax. Weight of the electrode: 400 kgDistance table - quill: 180/680 mmPosition deviation (PA): 0.005 mmaverage position spread (PS): 0.003 mmmean inverse span (u): 0.002 mmResolution: 0.001 mmNumber of flushing connections: 10manual flushing: 1/20 l / minautomatic dosing spray: 8 / 3-800 ml / minControl mode: Multi-taskingSimultaneously controllable axis: 4Simultaneously controllable rotative and linear axes: C with X, Y, ZStorage Capacity: 3.5 , MS-DOS, 720KBScreen: color 14 Interface: RS 232 / CV 24Rated current: 60 ARemoval rate: 450/590 mm3 / minNumber of channels: 1Agiepu ...

Die sinking machine make AGIETRON type EMS 3.30Year of construction 1979Table size: 630 x 500 mmgr. workpiece height: 340 mmAdjustment = X: 420 mmAdjustment = Y: 320 mmgr. workpiece weight: 8000 NReading option: 0.01 mmgr. distance of table quill: 700 mmWork container: 945 x 650 x 465 mmFeed travel = Z: 400 mmRapid traverse and servo speed: 600 mm / minOutreach: 500 mmAgiepuls generator: Type 60 L / DDLRated current: 60 APulse voltage: 100/150/270 V.Dielectric aggregate: Type DA 220Capacity: 450 mmWeight: 1540 kgvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Die sinking machine Fabr. AEG-Elotherm type Elbomat 222 WMash. -No: 224.4009with generator EP 60 C 2145172 and filter F 11 VYear of construction 1980Adjustment X: 300 mmAdjustment Y: 200 mmReading accuracy: 0.01 mmTable load max .: 400 kgTable dimensions: 580 x 310 mmTank / processing room: 700 x 450 x 265 mmMax. Fluid level above workpiece carrier: 250 mmTank volume: 70 lWorking head angle: 200 mmHead support: 200 kpMax. Distance between working head and table: 480 mmDepth gauge: 50 mmDepth-of-cut accuracy: + - 0.02 mmExternal dimensions of the machine: 1250 x 1225 x 2150 mmWeight approx.: 1.3 tWith- mot. Coarse adjustment of the working head / W axis- Eloplus Generaotr type EP 60 C- Heidenhain positioning controller TNC 1213 R Orbicut midi tromes- Adapter slot- H 400 system- Filter F 11Vused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.P ...

Makino U 86 Wire ereroding machine, Built in 2001, Multipulse control, Travel X/Y/Z 800/600/500 mm, max table load 3,000 kg, Bath size X/Y/Z 1220/910/500 mm, Clamping surface table 1220 x 910mm,

CNC EDM machine make INGERSOLL type IC 263Machine -No: 571304 built in 1988Table surface: 1000 x 525 mmMax. Workpiece nominal load: 2500 kgTravel X: 700 mmTravel Y: 400 mmQuill stroke Z: 400 mmmin / max. Distance table - quill: 350/750 mmTool carrier dimensions: 350 x 310 mmMeasurement resolution: 0.001 mmPlanetary radius mx.:5 mmPinole diameter: 220 mmMax. Head load: 1500 kgRecommended erosion load limit: 1000 kgFeed rate max .: 600 mm / minDimensions of the working container: 1300 x 750 x 550 mmCapacity: 535 lTotal Dilektrium: 750 lVolume of flushing pump: 25 l / minDelivery volume of filling pump: 200 l / minConnected load: 9.5 kVAConnection voltage: 380 V / 3 Ph / 50 HzOutside dimensions of the generator: 1950 x 2260 x 2900 mmWith- Generator M 60 DC 5 kVA- electrical meter f.d. Eroding the quill- Dialog DC-CNC planetary control PLT TVxa0xa0xa0(Dialog Color Graphic)- sep. Supply unit  ...

CNC spark erosion machine make AGIE type AGIETRON 100Device list 357914.1, series 015, device 005Technical specifications:Table size: 580 x 450 mmwith 3 T-slots 10 mmX axis: 350 mmY axis: 250 mmWeight of the erosion machine: 2275 kgWith- Agiematic T control, device list 813834.9, series 008, device 008, 290 kg 1.25 kVA- FSK, device list 813864.6, series 008, device 009, 65 kg- ATK 35, device list 144170.8, series 016, device 009, 220 kg- Generator Agiepuls 60M, device list 814104.6, series 008, device 008, 305 kg 3.4 kVA- Dielectric unit DA 100, device list 369964.2, series 020, device 009, 460 kg, 4.2 kVA + PD + GEN- tool changer- Cooling unit make HIROSS ICE 005, 230/1/50 serial no. 3293540001, 110 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We  ...

Control: Mitsubishi - 64 bit CNC Generator power: 70 amperes, multipulse Travel (X, Y, Z): 525 x 400 x 450 mm Working container (W x D x H): 750 x 650 x 420 mm (stroke tank) Work table (W x D): 730 x 630 mm Capacity: 1,000 kg Electrode changer: 30-fold pick-up plate magazine Accessories: - CO2 fire extinguishing system, - HSJ technology (High Speed Jump), - integr. Cartridge filter system, - MultiProg programming room software Status: outdated Warranty: - Price: On request

Die sinking EDM machine Make Charmilles type Roboform 51 built in 1999 X600 Y400 Z450 table 750 x 500 mm Max workpiece weight 1000 kg very well-kept condition machine plugged in, can be checked

Mitsubishi FA20S EDM Wire Cutting Machine Automatic wire threading

For sale wire EDM fanuc tape cut - w2 Year 1989 Kept and running well available immediately for viewing

Machine in perfect condition, currently in operation. Machine price with Erowa charger and magnetic plates

Sodick VL400Q EDM Wire Cutting Machine Machine is in excellent condition X : 400 mm Y : 300 mm Z : 220 mm

table length: 500 mm table width: 250 mm ampere: 50 A x-axis: 290 mm y-axis: 200 mm z-axis: 300 mm total power requirement: 6 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: m CNC-Controlled Die Sinker The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 350 mm y-travel: 250 mm z-travel: 256 mm max. size of workpiece: 750 x 550 x 250 mm U-axis: +/- 70 mm V-axis: +/- 70 mm rapid traverse X/Y/Z axis: 1,5 / 1,5 / 0,6 m/min rapid traverse U/V-axis: 0,6 m/min max. concentricity: 30° / 100 mm control: AGIEVISION wire dia.: 0,1 - 0,33 mm speed of wire: 60 - 300 mm/sec wire retraction: halbautomatisch total power requirement: 9,1 kVA weight of the machine ca.: 3,6 t dimensions: 2,21 x 2,21 x 2,22 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NEW MACHINE  - AFFORDABLE and QUALITY SOLUTION Tool changer and C axis are in option. PRODUCT SPECIFICATION A. MACHINE UNITS 1. Work Tank Dimensions 940 x 550 x 350 mm 2. Work Table Dimensions 630 x 360 mm 3. X, Y, Z, Axis Travel 400 x 300 x 300 mm 4. Distance between main axis to table 410 mm 5. Built-in rotational C-Axis Travel 360° ( System 3R or EROWA) Option 6. Max. workpiece weight 500 kgs 7. Max electrode weight 50 kgs 8. Capacity of Dielectric 300 liters 9. Max. Machining speed 420 mm3/min 10. Min. Wear rate < 0.1% 11. The best surface finish VDI No. 0 / Ra 0.08 um 12. Max. Output Current 45A 13. Input Power 3.3 KVA 220/380/440 Volt, 3 Phase, 50 Hz 14. Machine L x W x H 155 x 140 x 225 cm 15. Total weight of machine unit 1450 kgs Packing Dimension CNC-C50E2 &  ...

Wire cutting edm machine Manufacturer Accutex Model AU-3iA Year 2008

X : 320 mm Y : 220 mm Z : 220 mm Machine is in good working condition

Sodick AQ750L EDM Wire Cutting Machine X : 750 mm Y : 500 mm Z : 400 mm Machine is in very good condition

It is an innovated Roboform 30 plunger machine for PENTA CNC 60, including Penta CNC control system, C-box and motors on X and Y axes, new pump. Clamping Erow. Linear magazine for 4 electrodes.