cable recycling used for sale

For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.

Description: Automatic machine for the separation of copper from plastic, production around 50 kg per hour, moor 3. 4 kW fully automatic. never used, never used, packed in its original packaging Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm, weight approx.: 200 kg

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

Cable peeling machine recoem HKS-90 Knife block adjustable in depth and height, so that the pressure on cable heights or decrease. Year of construction: New Cable diameter: Min. 1mm 90 mm Power : 4 kW Weight : 550 kg Dimensions : L x W x H 1440 x 720 x 1200

THOFEHRN 3 to Crane Hoist / Wire Rope Hoist Cable winch, incl. control, gearbox + motor, German Crane

Corning 048E88-611-31-29 MIC Unitized Tight-Buffered Cable, Plenum, 48fibres,OS2. The roll weighs just under 300kg. Specifications General Specifications Environment Indoor Application General Purpose Horizontal, Vertical Riser, Plenum Cable type Tight-Buffered Product type Distribution Flame rating Plenum (OFNP) Fibre Category single-mode (OS2) Temperature Range Storage -40°C to 70°C (-40°F to 158°F) Installation and assembly 0 °C to 60 °C (32 °F to 140 °F) Operation 0°C to 70°C (32°F to 158°F) Cable Design Central Element Jacketed GRP Fibre Count 48 Number of Active Tubes 8 Subunit Colour yellow Subunit Diameter 4.40 mm (0.17 in) Tight buffer colour subunit Blue, orange, green, brown, grey, white Tensile Strength Elements and/or Armouring - Layer 1 Dielectric strength members Number of ripcords 9 Outer jacket material Flame-retardant Ou ...

Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 20 kg

The Rollenspalter is suitable for the columns and crushing of wrapped paper, cardboard or plastic rollers on core, or bail. Power 7, 5kW Control Siemens PLC supported with two-hand safety control -Cutting force 2x20to -Cutting speed 22, 3 mm / sec -Cutting channel length 2000 mm -Cutting channel height 1200 mm -Machine weight approx. 3500 kg colour of machine body RAL 7016 (anthracite grey) Guard RAL 1028 (melon yellow) Photos and more info on request Delivery time: approx. 12-14 weeks

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 550 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...

Technische Daten: - Hauptmotor: 7,5 kW - Vorschubgeschwindigkeit stufenlos: 0-20 m/min.  über Getriebemotor 0,75 kW - elektrische Höhenverstellung des Sägeaggregats  über Getriebemotor 1,5 kW - Transportbandbreite: 1400 mm - Transportbandlänge: 3000 mm - Rad Durchmesser: 600 mm - Sägeband: Bi-Metal 6150 mm für Stahl - Hydraulische Bandspannung - Sägebandstabilisator - Abmessungen: L=3000, B=3000, H=1800 mm - Gewicht: 1000 kg

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 650 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...

BTS-Bottle Crusher The BTS-Glass Crusher is ideal for crushing glass bottles in the beverage, glass industry and gastronomy. The volume of up to 100 beer bottles, wine and champagne bottles also other one way glass bottles can be crushed user-friendly up to 90% per minute. The glass bottle crusher impresses with its easy operation, throughput and large filling volume. - Volume reduction up to 80% - Reduces frequency of waste collection - Useable for beer, wine, champagne bottles and other one way glass bottles - Small foot print - Safe and easy to operate - Clean and safe work environment - CE-certified - Quality product Made in Europe Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x D): 1850 x 965 x 832 mm Transportation height: 1850 mm Machine weight: 315 kg Volume reduction up to: 80 % Suitable for bins up to: 240 Ltr

Treatment plant (quarry, construction waste)MFL Machine Factory Liezen Radmobile plant Impact crusher MFL RCI 100.130; Hewitt-Robins Vibration Vibrator; Spitzer Silo substructure type SK248; control and all attachments, conveyor belts motor, etc. plant is running. Contact via email: info@germantp.com

CANDY RECYCLING AD 2000 made in 2015 for recycling of Rework from hard candy production suitable also for jelly, toffee, lollies, fondant even wrapped products result after recycling: completely transparent and neutral sugar-glucose syrup-water solution consisting of: dissolving machine intermediate/buffer tank, volume 2000 L with platform horizontal rotary drum vacuum filter unit year 2015 very good condition

Grease separator sether boiler, Type: Easy Clean Standard NS 4B completely cleaned and rinsed, grease-free and odourless. leakage test. A spout pump is included in the scope of delivery. New price was 8000,00â?¬ net. Deutschaland-wide shipping in German-speaking countries possible at an additional cost. Delivery: - Boiler grease separator Easy Clean Standard NS 4B - Sampling device DN100/150 horizontal - Spühl pump for grease separators

RMH G 60 New Manufacturer: RMH Roller cutting width: 2000mm Roller cutting height: 1200mm Dimensions ( L x W x H ): 3100 x 1300 x 2500 mm Drive: 11 KW Manual and automatic working procedure Two-handed operating system Cutting force: 2 x 30 cylinders (60 tons cutting force) Total weight: 4200kg

Glass recycling plant, recyling plant used Consisting of the following machines: Task bunker for wheel loaders with 2 shaft shredders Dispenser Vibrorinne Becherwerk Crossband with band magnet Vibrorinne Gate valve Hammer mill MUD 89 45 kW Screw conveyor Becherwerk Windssichter 2 filters 2 silos Becherwerk 2 pre-containers 2 dosing sera 2 rotor ball mills RM150 each 75 kW 2 filters Projected capacity: approx. 4700 kg/h used glass, bottles, vases, etc. End product: Glass powder in grain size 0 -5 mm as well as discarded iron waste, plastic waste and paper waste The plant can also be sold in parts. Originally, foam glass choter was produced in the complete plant. We also have the remaining components such as EIRICH mixer 8 belt furnaces max 1100° C as well as other silos, filters and suctions, conveyor screws, cup plants...

Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission.  ...

Waste Recovery Machine (Opener and Fine Cleaner) OFC machine Year 2018 Model REA 120 Made in EU The function and process: The machine may be used for processing of: -virgin cotton, -cotton wastes, -Jute wastes, -hemp, -linen and other long or short staple fibers. -production capacity is to process 300kg of material per hour The long fibers are cottonized at the entry to the machine, it means the fibers are cut to the short staple length. With the REA – 120 OFC machines can recover up to 85% of LINT may be returned to the process as regenerated fibers. Please note: Rags cannot be opened on this machine. The machine's max. capacity is to process 300kg of material per hour. If we make a basic conservative calculation, we may calculate 250 kg of material per hour and we will obtain approx. 210 kg of good fibers out of that quantity. Calculating one turn of  ...

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

Manufacturer: BERGMANN Type: PS 8100-L Machine Height: 2200 mm Machine width: 1,200 mm Machine depth: 1,625 mm Loading height 1900 mm Machine weight: 800 kg Rated motor current at 400 V 3.0 the nominal current transformer 230 volts you have Engine power: 0.38 2 2 kW Required fuse: 10 A, slow-speed Theory. 13 rev/min Protection class: IP 54 (D), (E) Fire Hydraulic oil: HLP 32 Bale weight: 150-400 kg Capacity: 1 m3

Pyrolyx Pyrolysator Thermal Double Screw Reactor Model 1-FD07 Reactor for the depolymerization and pyrolysis of rubber granules Capacity rubber granules (typical): 1100 kg/h media Compressed air: max. 7 bar Instrument air: max. 7 bar CO2 low pressure: max. 1.3 bar CO2 medium pressure: max. 3.5 bar specifications Dimensions of the system: 14600 x 1540 x 1500 mm Screw diameter: 790 mm Weight: about 20 tons. (metric) Product Contact parts: 1.0473 Pressure tested at 200 mbar Design -100/+200 In operation -80 Temperature maximum: Up to 550°C Operating temperature: 350°C-550°C Power requirement Start-up: 180 kW Energy demand Operation: 140 kW Seal: Gland seal(r) with graphite seal Max sound pressure level: 80 dBA Bearing flushing: with CO2 at 300 mbar engine: Voltage: 400V, AC Frequency: 50 Hz Power: 2.2 kW Protection class: IP54 Frequency transmiss ...

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

1. feeding conveyor belt 10000/ 800 5.5 KW 2.shredder technofer CC940 SO 55 kw 3. extracting conveyor belt 12000/ 800 2,2 kw 4. heavy contaminants settling tank technofer vads 2,2 kw 5. washing centrifuge technofer LO 25 37 kw 6.conveyor belt 4000/ 800 2,2 kw 7. conveyor belt 6000/800 2,2 kw 8.wet grinder 800/800 55 kw 9. extracting auger 300/ 6000 2,2 kw 10.washing centrifuge jiangsu fungsheng fs 1000 55kw 11.extracting auger 400/7000 2,2 kw 12. screw press 75 kw 13. dry grinder 55kw 14. blower 11 kw 15. serpentine dryer with hot air generator 30 kw 16. stocking silo with mixer 3,6 kw 17.double stage cascade extruder granulator FDJ 130/150 - cutter compactor motor 75 kw - first extruder d130 motor 132 kw - second extruder d 150 motor 55kw - t ...

MO.DI.TEC_GTwin Plus ABS SN: 95000004589 Machine in great condition, most of time not in use. The MO-DI-TEC Goliath range of low-speed granulators are specially adapted for beside press recycling of sprues, parts. They produces large quantities of regrind high quality without affecting the materials’ molecular structure. Granulate may be fed directly back into processes, saving time and material. The Goliath TWIN Plus assures an optimal regrind of a much more important output thanks to a wider cutting chamber and 2 gearmotors (2x1,8 kW or 2x2,2 kW optional). Models feature a unique tooth design facilitates both trapezoidal and helical cutting, and a resistant steel coating protects the teeth against wear from abrasive materials. Ergonomic grinder Reversible combs Both helical and trapezoidal granulometry Soundproof steel hopper Easy cleaning and maintenance IMD dete ...

Fully automatic recycling system for edge trim Compactly designed, no operating personnel needed most of the time, top quality end products. INTAREMA® K transforms edge trim efficiently and carefully into high quality, clean pellets. Up to 100% of pellets returned to the production process.

Recycling of PET bottles and PET films: Film washing and drying system for processing small-cut polyester films. • Capacity 800 kg/h polyester • Little used, almost as good as new. • The machine is still in operation. • Incl. big bag bagging station. A shredder must be procured separately. This means that an almost fully equipped production plant can be purchased. Also Folien + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Recycling of PET bottles and PET films: Film washing and drying system for processing small-cut polyester films. • Capacity 700 - 800 kg/h polyester • Little used, almost as good as new. • The machine is still in operation. • Incl. big bag bagging station. A shredder must be procured separately. This means that an almost fully equipped production plant can be purchased. Also Folien + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

TECHNICAL SPECIFICATIONS Manufacturer: STETTER (Germany) Designation: Concrete recycling plant Type: RA 20 Year of construction: 1994 Normal concrete washout capacity: 20 cbm/h Required rinsing water volume: max. 15 cbm/h grain size: 63 mm Separating cut: 0.20 mm Drive power washing drum: 2 x 4 kW Rinsing water pump washing drum: 2.36 kW SPECIFIC COMMENT - incl. washout pump - Operational and fully functional - Excl. agitators and dirty water pump

This device is calibrated for rapid detection of metals in scrap and recycling. Within a second, you can see V2A, V4A, chrome steel, bronze, gunmetal, aluminum alloys and much more. The device is not suitable for precious metals or catalysts. The device has only been in use at the customer for about 3 years and is in good condition. The device includes two batteries for about 8 hours of operation each, a charger with charging cradle and the transport protective case. In contrast to newer devices, the internal camera is also unlocked here, so that you can save images of the measuring range in the device. The device has received all available software updates and can be used in conjunction with the smartphone app, via cloud computing or even as a single device.

1 used residual concrete recycling plant BIBKO ConTec, year of construction 1992, without control, spare parts available, rep. needy, sale ex location Upper Franconia

1 used BIBKO RAM 16, built in 1996. without control and in need of rep., from stock, immediately available, free loading

Description Plastic Regranulation Line Extruder diameter 106 L/D 35 Vent Feeding Silo Screen changer Machine stoped for upgrading to a new version. Worked till arrive of the new one.

Description Regranulation Line complete of granulator Extruder Diameter 60 L/D 35 Silos for forced feeding of film Granulator 35/45 Vent Screen changer Centrifuge

Description Regranulation line for polyolefins Screw diameter 85 Nr.1 Vent Spaghetti granulation head Hydraulic screen changer Cooling tank Pelettizer

Brand new compost turner For tractor with rear driving device From 200 hp For flexible composting with optimisation of space logistics! Promptly available Subject to prior sale!

Plastic recycling machine YEI Model: VDN-V100 Screw diameter : 100 mm LD ratio: 30 Screw rpm: 0-150 Main motor: 125 HP , 90 kW Cutter compactor motor: 75 HP, 55 kW Degassing : Two zones with water based vacuum pump Screen changer: Hydraulic, with 2 cylinders, non-stop machine running design Pelletizer: Die-face type by water Cenrifuge: Vertical type Feeding conveyor with metal detector Max. output: LDPE 380 kg/h, HDPE 360 kg/h, PP 330 kg/h

Complete recycling plant for washing machines, refrigerators and other household appliances The plant was only in operation for 6 years. The new price was approximately €3 million net. Request pictures!

AGICOM Recycling Machines: Used recycling plant for cables, composites, small electrical appliances. Plant components recycling plant CR300U used: Single Shaft Shredder MR1740 Granulator CMG4050 Zig Zag Separator Turbine Mill Ghibli 352 Separator SA200 Filter tower 16 sleeves Capacity approx. 300 kg/h/modular design

We sell a used system of recycling machines with the following components (built in 2004): - Chip crusher type RS 300 E with coarse part outlet (Steimel) - Scraper belt conveyor with torque cut-off (DGS) - Chip centrifuge AZ - 250 (ARP) - Vacuum valve VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve -Switchboard The facility is fully functional and can be picked up.

Eddy current separator from Bakker Magnetics 104 E The latest eccentric eddy current "104" X Ecentric Magnetics has been specially developed and designed for the separation of fine particles from, for example, bottom ash, electronic scrap or small metal fractions. The high-speed magnetic rotor in this machine has the highest number of poles on the market, namely 104 (!) and operates at a speed of 3,600 rpm. The 104 rotor produces an astonishing field frequency of 1.56 kHz Production width 2 meters wide

ID3099 Liebherr LRS year/Year of construction 2008 Concrete recycling plant with control system, rinsing gallows, water trough and wash-out screw. Without pumps Concrete recycling plant with control system, flushing gallows, water trough and washout auger. Without pumps

TBL SREC 12 - residual concrete recycling plant - COMPLETE - with STETTER RA 12 Washing drum factory new 0.0 operating hours with guarantee including control unit including feeding table Includes 3 submersible pumps (1 piece submersible pump, for truck mixer washing pipe 2.2 kW, 1 submersible pump for returning the recycling water to the washing drum 2.2 kW, 1 submersible pump for draining the recycling water to the water dosing hopper of the concrete mixing plant 3 kW) Washing capacity for normal concrete 12 m3/h Washing capacity for normal mortar 5 m3/h max. particle size 63 mm Separation cut 0.2mm Rinse water volume (adjustable) 7-12 m3/h Rinse water connection for washing drum DN 50 Drain pipe DN 200 Water content of the drum (fill level) 2 m3 Washing drum follow-up time (adjustable) 20 min If required, including delivery, assembly and commissioning Pri ...

Description Tecnova regranulation line Single Screw extruder 105 L/D 36 nr.1 vent with vaccum pump Silos for foil feeding Granulator Meccanoplastca MZ 44/55 year 2006 Conveyor for granulator feeding with metal detector CEIA

Recycling machine trade AGICOM-Pedergnana OG: The T150 cable recycling plant is suitable for the recovery of copper and aluminium from electrical cables. The T150 is equipped with an integrated turbine mill and also with a zig-zag separator - a novelty in this size! Due to these integral components, the T150 system is also ideally suited for the processing of mixed and stranded cables, as well as data conductor or EDP cables. Specifications Feed material: Mixing cable iron-free Throughput: up to approx. 150 kg / h

Recycling machine trade AGICOM- Pedergnana OG: Cable recycling plant used consisting of single-shaft shredder MR1740; Granulator CGM4050; Zig Zag Separator; Turbine mill Ghibli 352; separator, filter tower; Throughput approx. 300 kg/h. Details on request!

Cable recycling plant with many innovations in all plant components for up to 600 kg/hour (depending on material) The basis of this recycling plant is modularly constructed from strong and innovative individual components. In the standard version, the following structure is obtained. - Preshredder MR 4080 or MR 40-100 - Conveyor belt with magnetic separator - controlled by PLC - Granulator C 600 with axle length 600 mm, 5 rotor blades and 37 kW drive, cooling of the housing by unit against adhesions - Z-separator for the separation of heavy copper or 1 granulate - Dosing drum for the optimally uniform feeding of the following turbine mill - Ghibli 545 turbine mill (new model), optionally with coolable housing and inverter control - SA 600 separation table, new version with PLC inverter control of the air volume + eccentric drive with inverter control of the oscillation + adju ...

Used cable recycling plant Tecnoecology T 250 Turbo Year of construction: 2008 The plant consists of the following parts: - Pre-shredder: Bano MAC 630, approx. 250 - 400 kg/hour, depending on material - Conveyor belt to the dosing accumulator, approx. 4.0 m - Dosing accumulator with discharge conveyor, approx. 1.5 m³ - Controlled conveyor belt with belt magnet for feeding the granulator, approx. 4.0 m - Granulator GA 400/30, approx. 250 - 400 kg/hour, depending on material - Turbine mill, T 25-2, built in 2019 - Separator TV 300, inverter controlled, separation table 80 μm - Dust extraction and filter system The entire system currently achieves between 200 and 300 kg/hour in operation, depending on the cable composition. On request, additional components, such as a big bag loading for the plastic or the re-screening of the granules, can be supplied. The plant is curre ...

The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...