burner used for sale

Description: diameter 160 mm door opening 45 mm Approx. Onsite Dimension. (l x w x h): 160 x 160 x 240 mm, weight approx.: 12 kg

Elco Klockner burner in insulated cabinet, burner type: EK 7.450 G, fabrication number: 9870012 EA, year of construction: 1998, 790-3495 kW, maximum gas pressure: 300 mbar, dimensions: 1340 mm x 1180 mm x 1380 mm.

Elco Klockner burner in insulated cabinet, burner type: EK 7.450 G, year of construction: 1998, 790-3495 kW, maximum gas pressure: 300 mbar, dimensions: 1340 mm x 1180 mm x 1380 mm.

dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner � ...

Item Combined duo burners, gas and oil operated Fabr.: Steinmüller, type 1: G-18-K 1120/800, type 2: DAG-18-K 1120/800, y.o.m.: 1996, Burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1,500 Pa, exhaust temperature 424 degrees, (8 units), Burner data Duo oil burner: calorific value 42MJ/kg, heating oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner working area 1:5, max. Oil pressure on the takeover 18 bar, temperature before burner 240 degrees, (8 pieces), Remark: Burners must be dismantled by the customer. The burners can also be purchased individually.

Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...

High-frequency ignition device, heating, gas and oil burner, automatic gas burner, gas relay, Control box, burner control -Manufacturer: Siemens, automatic gas burner -Type: LFL1.333 -Dimensions: 120/105/H105 mm -Weight: 1.2 kg

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, Control box, burner control -Manufacturer: Landis & Staefa, automatic burner control unit -Type: LMG22.130A27 -Dimensions: 90/60/H60 mm -Weight: 0.2 kg

Fives Pillard Gas Burner GRC-G3 Burner from 2015. 19.75 MW x 21,000 m3/h. Manufacturer: Fives Pillard Model No.: GRC-G3 Type: Gas Burner Serial Number: 205991C3 / 205991C3 Heat output [MW]: 2.82 – 19.75 Air flow rate [m3/h]: 3,600 – 21,000 Year of construction: 2015 Hours:– Weight [kg]: 610

Deck baking oven MIWE, type: ideal 1500/4 DS-ZK - 2 thermal circuits - 2 piece gas burner - replacement steam pipes available - maintenance burner 2 x a year - maintenance oven 1 x annually by MIWE - State: good, ready lighting system: gas Baking surface: 18 m² Oven width: 1.80 m Oven depth: 2.00 m External dimensions: 2.55 B x H 2.35 m El. Supply: 400 V, 3N, 50 Hz, 6.5 kW Nominal thermal power: 121 kW Working pressure: 8-50 mbar Sales by closure. Inspection and testing according to arrangement. Costs of disassembly and transport on request. Like to disassemble and reassembly we the oven for you.

Heating burner, bitumen burner, flame device -complete with hose and regulator

Heating, burner, gas burner -Gas type: natural gas liquid -Gas connection: 20 mbar to 1000 mbar -Nominal heat output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 973 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 972 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece

Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Dräger, burner set set in a metal box -Burner size: 0.2 to 30 mm -Accessories: see pictures / parts list -Dimensions of the case: 470/220/H95 mm -Weight: 9 kg

Burner

Oil burner pump, feed pump with motor SUNTEC, ELECTRIC MOTOR PLANT BRIENZ pump: AE77C 7270 21 Pressure: 10 - 28 bar Flow rate: 80 - 115 l/h max. speed: 3600 rpm Engine: RP63M2 0,0,18 kW ( 0,25 PS ) 2800 rpm 220 / 380 V 3AC used, tested ! Dimensions: 345 x 165 x 125 mm

Safety device, flashback arrester, non-return valve, for burner gas WITT 85-30 DIN EN ISO 5175-1 EN730-1 Acetylene: ( A ) 1,,5 bar methane, natural gas: ( M ) 5.0 bar propane, liquefied petroleum gases: ( P ) 3.5 bar hydrogen: ( H ) 4.0 bar input: 1 LH MG Output: 1 LH AGS Material: Brass New ! Dimensions: 190 x 84 x 84 mm

Safety device, flashback arrester, non-return valve, for burner gas WITT 85-30 DIN EN ISO 5175-1 EN730-1 acetylene: ( A ) 1,5 bar city, long-distance and natural gas: ( CM ) 5.0 bar propane, liquefied petroleum gases: ( P ) 3.5 bar hydrogen: ( H ) 4.0 bar input: 3/4 LH MG Output: 3/4 LH AGS Material: Brass used, tested ! Dimensions: 180 x 84 x 84 mm

Grip MWW, MECHANICAL WORKSHOPS WURZEN Burner 90 W Gas connection: G 3/8 L Oxygen connection: G 1/4 R with union nut and hose connections New ! Dimensions: 250 x 50 x 55 mm

Steam boiler Loos with Weißhaupt gas burner Type: U-ND 500 capacity: 500 kg steam/h Max. operating overpressure: 1 bar Test overpressure: 2 bar Water capacity full approx.: 770 l year of construction: 2003/2004 CE-marking: 0036 incl. hot water tank with condensate pump

Flame cutting system, torch, oxy-fuel cutting system, cutting torch, welding torch, hand cutting torch, welding set -Zinser: burner set set in sheet metal box -Accessories: see pictures -Dimensions case: 480/230/H90 mm -Weight: 6 kg

Permissible operating overpressure: 6.0 bar Permissible flow temperature: 120 C Permissible boiler power: 400 kW Heating output: 444 kW Content: 380 liter Burner: Weishaupt RGL 3/1 - E Year: 1994 Fuel: Heating oil EL and natural gas Subject to prior sale - errors possible Internal Reference Number: D-1176

Further information on request

Switchgear, control, UV light -Type: Honeywell EC7830 A 1066 -Dimensions: 130/130/H115 mm -Weight: 900 g

Abicor Binzel torch neck for robot 962.0300 Robo-WH-241 straight M6 New Stock Net amount plus 19% VAT

There are two identical burners available, power: 350-2800kW, connection pressure: 15-500mbar, connected load: 9.23kW.

Fuel: natural gas, power: 300-2000kW, connection pressure: 15-500mbar, electric power: 4.32kW, operational hours counter: 38,723h, with documentation, without control cabinet.

Power: 300-2000kW, with gas pressure regulator FRS 520 Dungs and solenoid valve Dungs.

Power: 300-2000kW, with gas pressure regulator FRS 520 Dungs and solenoid valve Dungs.

Nozzle cleaning machine, torch cleaning station Gas nozzle cleaning device for MIG MAG robot welding systems BINZEL type BRS Ident. No.: 8310260 Device No.: 4212 Year of construction: 1998 Welding nozzles Dirt cutter for robots with arc welding machine Operating voltage: 24 volts DC/DC Cutter diameter inside: 8 mm Cutter diameter outside: 12 mm Stroke movement: 50 mm Pneumatics Compressed air connection: 6 to 8 bar - Milling drive via air motor ( Desoutter) - pneumatic cutter infeed movement (lifting movement) - replaceable cleaning cutter - gas nozzle fixation via pneumatic prism clamp Space requirements: L x W x H 240 x 230 x 380 mm Net weight: 8 kg good condition The milling machine for single-wire welding torches comes from a robot welding cell and worked without any problems until dismantling.; used

Fuel: Natural gas Manafacture: Remko Type: VRS170 Heating power: 198 kW Air mass flow: 12,000 m³/h Mains gas pressure: 2.6 bar

Fuel: Natural gas Manafacture: Remko Type: VRS170 Heating power: 198 kW Air mass flow: 12,000 m³/h Mains gas pressure: 2.6 bar

Brennerhals BINZEL, ABICOR WH241 ROBO WH241 M6 45 DEG. BENT 962.0302 New ! Dimensions: 270 x 70 x 50 mm

High-frequency ignition device, heater, gas and oil burners -Landis & Gyr Type: LGK16.322A27 -Voltage: 220-240 V -Frequency: 50-60 Hz -Dimensions: 100/100/H125 mm -Weight: 1.2 kg

High-frequency ignition device, heater, gas and oil burners -Landis & Gyr Type: LFL1.622 -Voltage: 220-240V -Frequency: 50-60 Hz -Price: per piece -Number: 2 pieces -Dimensions: 100/100/H125 mm -Weight: 1.2 kg

High-frequency ignition device, heater, gas and oil burners -Landis & Gyr Type: LGK16.335A27 -Voltage: 220-240 V -Frequency: 50-60 Hz -Dimensions: 100/100/H125 mm -Weight: 1.1 kg

Description: Batch consisting of 2 burners Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 600 mm, weight approx.: 50 kg

for filtration of air

1 pc flame pretreatment system with electronic control 1 pc EF 600-1 Burner control consisting of Electrical control with ignition and monitoring device for 1 pc burner, control electronics, control panel with plain text display, Emergency stop setup and interface for external control Mechanical control with Safety valves, gas/air mixers, thermoanemometrial mass flow meters for air and gas, Engine valves, pressure monitors for overpressure and vacuum monitoring and supply air blowers. 1 pcs C24-2300 Film burner, 2200 mm working width, adjustable up to min. 1000 mm with connections for water cooling and water-cooled double T-beam 1 pc spare parts consisting of 2 earth replacement electrodes and 1 replacement fabric Power supply : 400/230 V 50 Hz, 2.5 kVA Gas supply : Natural gas 75 – 100 mbar Heat output : max. 400 kW Gas consumpt ...

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

The IQM MICROSTEP SPLR 6001.25 Pr BEM 12 CNC plasma cutter was manufactured in 2008 by the Slovak company IQM s.r.o. Thanks to the rotary head tilted by ± 50 degrees, it is possible to cut sheets of various thicknesses - 25 mm with a burner tilt of 50 degrees, 35 mm with a burner inclination up to 25 degrees and 50 mm with a zero burner inclination. The working table has a bridge structure with pneumatically opened sections, and its dimensions are (L x W) 6000 mm x 2500 mm. The burner is equipped with, among others in: MSNC 500 CNC control, AsperWin software with AsperBevel module or Hypertherm HPR 130 plasma unit. The total weight of the R-SPLR 6001.25 PrBEM12I (G) plasma cutter is 5000 kg. Technical data of the IQM MICROSTEP R-SPLR 6001.25 PrBEM12I (G) CNC plasma cutter - dimensions of the working table (length x width): 6000 x 2500 mm - type of working table: bridge with pneum ...

The gas flare was intended for a research project that could not be carried out. It is brand new and in its original packaging. The torch is supplied as a complete "package unit" with an on-site control cabinet made of CrNi steel. The torch can be installed both indoors and outdoors, but the torch should be visible to the operator of the control cabinet. 1.1 Pilot burner / biogas support burner with fittings The equipment of the pilot biogas burner unit consists of the following components: - Shut-off ball valve DN25, approved for biogas - Biogas filter DN25 - Pressure regulator DN25 - Pressure gauge with "push-button shutdown", 0-100 mbar, approved for biogas - Gas solenoid valve DN 25, make: Kromschröder, type VAS 125R/LW - Flame arrester DN25, make: Protego, FA-G1" IIA1-P2,2 - Biogas burner nozzle (4 pcs.) 1.2 Process gas burners with fittings The equipment of the p ...

Apple pomace drying as a precursor for pectin production at albi Berghülen Capacity: up to 1.5 tons of pomace per hour, built in 1977 and 1992 Manufacturer: Kunz AG, Dintikon CH Function The apple coming from the winery became damp pomace with a transport screw into a pomace transport system open at the top transported diagonally upwards, and then via a further transport screw, D= 600 mm in the all-round running round drying chamber, D = 360 mm, L = 11,400 mm. With an internally welded bucket in the drying chamber, the still damp pomace moves intensively with the hot air. At the same time, a gas burner flame and the furnace blow the hot gases into the drying chamber. Length burner and oven together: 6,500 mm The pomace waste, which is dried and crushed at the same time, is processed by an ejection chamber located directly at the end of the drying chamber with a t ...

Steam generation plant consisting of Double flame tube boiler with economiser, 2 x SAACKE burner Teminox for natural gas H, calorific value HS 11.4 kJ/Nm³, 14MW (2 x 7 MW), 17 to. Saturated steam at 20 bar ü (25 bar hp). Boiler: Manufacturer LOOS Deutschland GmbH Type ZFR 2300 Type of large-capacity water boiler with two flame tubes (three-speed) and a flue gas water preheater (Economizer) Permissible operating pressure (PS): 24-25 bar Permissible operating temperature: 224°C Permissible steam output: 23 to. Saturated steam Burner: 2 x SAACKE Type Teminox GS 75-22 Fuel: Natural gas There is a soundproofing hood for each burner Fireplace: 37 meters above ground Outlet area: 0.507 m² Stainless steel double fireplace Water treatment plant Manufacturer CHRIST consisting of softening system and downstream reverse osmosis system Complete installation from y ...

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

Aluminum Casthouse for sale:, Tilting rotary drum oven MASTERmax-: 3TB9, Capacity: 9 to 19 tons., Burner power: 3 MW, Electrical connection load: 88 kW, Typical power consumption: 400 - 450 kWh/t. for mixed scrap, Throughput: up to 70 t. Scrap/day/3 shifts, Complete with 2.0t linear charging machine. load, automatic natural gas/oxygen burner, weighing system and SIEMENS SIMATIC S7 PLC control., 2 pieces – spout distribution channel from the rotary drum oven to the holding ovens, Striko Westofen holding oven HR-T 10,000 500, Capacity: 10 tons, Burner: 3 gas/air burners with a total of 1.3 MW Melting capacity: 500 kg/h, Electrical connection load: 23 KW, Complete casting furnace for alloying and casting with ramp for charging ingots and alloying elements, automatic bath temperature control, flushing blocks with nitrogen/argon flow control, hydraulic manual tilt and SIEMENS SIMATIC S7 PLC ...

Thermal Oil Tunnel Furnace Power max.: 465 kW permissible operating pressure: 2 bar Test pressure: 5 bar Volume / per plate: 2800 / 45 dm³ permissible max. temperature: 300 °C Heat transfer fluid: DEA / DEACAL HT 22 Burner: Weishaupt Burner Type: G3/1-E Burner version: ZMD Burner power: 90 - 630 kW Gas Type: N Burner connection pressure min/max.: 15 / 200 mbar Condition: in working order Availability: as of now

Make : Wolf Built: 1995 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 7 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH), 2 pieces right and left Roller door: 6.0 x 2.5 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x13 pcs. 790x495 mm Transverse travel unit: 8 pcs trolleys Heating unit: 267 kW Burner : Gas burner Dry temperature: 80 degrees C Supply air unit: 22,800 m3/h; 7.5 kW; 960 rpm, V-belt Exhaust unit: 22,500 m3/h; 7.5 kW; 960 rpm, V-belt Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin: Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. recessed lamp with 4 x 58 W each Entrance side: 2-le ...