Center height: 285 mm Center width: 1500 mm Circumferential Ø: above bed 580 mm Spindle bore: 72 mm Spindle mount: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 20 - 2000 rpm Feeds: longitudinal/flat 0.05-16.32/0.025-8.16 mm/rev Thread pitches: 0.5 - 120 mm Electrical connection: 400 V, approx. 10 kW Dimensions: 3000 x 1250 x 1550 mm Weight: 2860 kg

Saw Type ON 254  ...

• more information

diameter: 80 mm width: 25 mm thickness: 1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

Semi-automatic hacksaw make BULMAK type OH 253Fabr. -No: 1286 built in 1986Cutting area round: 280 mmxa0xa0xa0 flat: 250 x 250 mmxa0xa0xa0 45 °: 180 mm6 medium speeds: 10 - 32 m / minSaw blade length: 450 mmDimensions L x W x H: 1400 x 700 x 1000 mmWeight approx: 570 kgWith- Cooling device- miter viceused, from an operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scali ...

turning diameter: 440 mm turning length: 1500 mm swing diameter over bed slide: 210 mm Swingdiameter in the bed bridge: 620 mm centre height: 210 mm reus: 21 (20 - 2000) U/min tail stock: MK5 quill stroke: 180 mm diameter of quill: 70 mm spindle taper: DIN 55027 Nr. 8 spindle bore: 62 mm feed: längs 0,04 - 12 m/min feed: quer 0,02 - 6 m/min total power requirement: 7,5 kW weight of the machine ca.: 2430 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjus ...

turning diameter: 440 mm turning length: 1000 mm swing diameter over bed slide: 210 mm Swingdiameter in the bed bridge: 620 mm centre height: 210 mm reus: 21 (20 - 2000) U/min tail stock: MK5 quill stroke: 180 mm diameter of quill: 70 mm spindle taper: DIN 55027 Nr. 8 spindle bore: 62 mm feed: längs 0,04 - 12 m/min feed: quer 0,02 - 6 m/min total power requirement: 7,5 kW weight of the machine ca.: 2250 kg dimensions of the machine ca.: 2450 x 980 x 1330 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change  ...

turning diameter: 760 mm turning length: 3000 mm swing diameter over bed slide: 520 mm centre height: 380 mm reus: 17 (7,5 - 1015) U/min tail stock: MK6 quill stroke: 225 mm diameter of quill: 105 mm spindle bore: 132 mm feed: längs 0,039 - 18 mm/min feed: quer 0,02 - 9 mm/min total power requirement: 15 kW weight of the machine ca.: 4700 kg dimensions of the machine ca.: 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display  ...

turning diameter: 660 mm turning length: 1500 mm swing diameter over bed slide: 420 mm Swingdiameter in the bed bridge: 850 mm centre height: 330 mm reus: 15 (9 - 1320) U/min tail stock: MK6 quill stroke: 225 mm diameter of quill: 105 mm spindle bore: 103 mm feed: längs 0,039 - 18 m/min feed: quer 0,02 - 9 m/min total power requirement: 11 kW weight of the machine ca.: 4170 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 too ...

For sale a Dresser and Wayne CNG natural gas tap in good condition.  ...

• more information