bruderer leinhaas used for sale

Bruderer BSTA 18 600 spm High-performance speed from 100-600 spm Force Max 180 KN Adjustable stroke New Silicon control Pneumatic and hydraulic all new Strip width max 190 mm Feed Bruderer BBV With digital stroke counter with programmable auto stop and digital speed counter Overhauled, very good condition, ready to work.

High speed press Original Manufacturer by: BRUDERER Type: BSTA 30 Technical data: Stroke power 300 KN (30 tons) Adjustable speed 100 - 600 strokes per minute up to 10 strokes in one second Equipped with synchronized BBV feeder Feed pitch up to max. 60 mm adjustable, highly accurate With PLC control Three working mode: single punch, complete stroke and full automatic Emergency stop Pneumatic clutch and brake Weight approx 2.5t Automatic in feed, fully synchronized with punching moment Tool and coiler not included (price on request) Technical Air 8 bar Operators instruction manual Machine with new CE certificate Overhauled - Rebuilt by Silicon plus

Pressing plate of BRUDERER BSTA 41 type W x D x H = 660 x 550 x 95 mm Hole = 500 x 100 mm

Bruderer press. Year of production: 1985 Condition: perfect The press has a soundproofing cabin and a roll feeder.

sheet width: 0 mm plate thickness: 0 mm plate length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 34925 Technical data Pressure: 60 to Stroke: (stepless) from: 70 s/min up to: 800 s/min Execution: 4 supports Table surface: Length: 770 mm Width: 620 mm Thickness: 120 mm Table relieving: Length: 580 mm Width: 100 mm With pressing power: downside up Slide adjustment: 80 mm Stroke adjustment: from: 20 mm up to: 76 mm Slide clamping surface: Length: 700 mm Width: 456 mm Passage between the supports: longitudinal: 650 mm Lateral: 260 mm Air connect: 6 - 10 bar Voltage 50 Hz 3x: 400 Volt Total power required: 41 kVA Machine´s weight about: 7600 kg Overall dimensions machine: Length: 2600 mm Width: 2100 mm Height: 2200 mm Various accessories: Belt feeding: SOPREM Workpiece conveyor Sound insulation cabin Chip conveyor

Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.

Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.

very well preserved automatic machine with/without motor reel

pressure: 20 t stroke: 8-38 mm no. of strokes: 100-1800 Hub/min table surface area: 400x400 mm table pass: 380x80 mm table height: 1000 mm weight of the machine ca.: 4 t dimensions of the machine ca.: BxTxH 1600x1600x3100mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press capacity: 30 ton Ram stroke adjustable: 16 - 40 mm Slide adjustment: 40 mm Shut height (stroke down, adjustment up): 230 +/- 20 mm Free lateral opening F-B: 170 mm Table surface area : 480 x 450 mm Slide area: 250 mm Number of strokes: 100 - 600 s.p.m. Required power: 5,5 kW Dimensions L x W x H: 2.150 x 1.200 x 1.160 mm Weight of machine approx.: 2,5 ton

Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton

Max. stroke speed: 600-2000/min, feed: 10-80mm, with oil cooler.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

pressure: 125 t plate thickness: 2 mm no. of strokes: 100-1000 Hub/min Control: Bruderer total power requirement: 50 kW weight of the machine ca.: 23 t dimensions of the machine ca.: ca. B 3 x L 6 x H2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Feed BBV 101/75 on the right-hand side. Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Mbawvyqg Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Key data: 30 t, 100 1/min

Specifications Pressing force 30 t Stroke rate 100 – 600 mm Plunger stroke adjustable up to 40 mm Installation height 300 mm with built-in clamping plate

pressure: 20 t total power requirement: 20 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

pressure:030 t stroke:8 - 40 mm no. of strokes:100 - 600 /min distance between columns:325 mm distance table/ram, max. stroke up, adjustment up:250 mm table surface area:540 x 300 / 325 x 395 mm hole in the table:315 x 110 mm table height over floor:1000 mm column travel -side:290 mm ram surface:250 mm material width of feeder:120 mm material thickness of feeder:3,0 mm feed length:60 mm power requirement:5,5 kW weight:2,6 t Dimensions (WxDxH):1,5 x 1,2 x 2,2 m clutch:pneumatic roll feed:mechanical, Bruderer BBV 120/60

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 30 to PRESS TABLE   table surface (left-right): 480 mm   table surface (front-back): 428 mm SLIDE (MECHAN. PRESS)   slide adjustment: 40 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 40 mm   variable speed: yes   stroke rate (min.): 100 /min   stroke rate (max.): 600 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 220 mm STRIP-FEEDER   feeder type: roll feeder   feeding step min.: 20 mm   feeding step max.: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 4.5 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/ri ...

CONTROLS   conventional PRESS FORCES   total force (nominal): 20 to SLIDE (MECHAN. PRESS)   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 38 mm   variable speed: yes   stroke rate (min.): 100 /min   stroke rate (max.): 1800 /min STRIP-FEEDER   feeder type: roll feeder ELECTRICAL SPECIFICATIONS   total power consumption: 20 kW DIMENSIONS / WEIGHTS   total weight approx.: 3600 kg Coil Reel&Straightener KOHLER (option)

Max. pressing force: 250kN, stroke: 13-38mm, stroke speed: 875-1500/min, connected load: 20kW.

Pressing force: 40t, stroke adjustment: 13-57mm, ram adjustment: 60mm, stroke speed: 60-1200/min, connected load: 15kW, weight: 6t, with documentation, an inspection is possible.

Press capacity: 25 ton Ram stroke adjustable: 13 - 38 mm Slide adjustment: 51 mm Shut height (stroke down, adjustment up): 230 - 281 mm Max. die size: 430 x 360 mm Number of strokes: 100 - 1.500 s.p.m. Table surface area : 530 x 530 mm Required power: 18 kW Dimensions L x W x H: 2.075 x 1.355 x 2.620 mm Weight of machine approx.: 4,5 ton feeding speed: sheet width: 200 mm

Bihler B-4/2 Welding Control System. Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Year of manufacture: 1988/04. Made in Germany. More Bihler and Bruderer machines on stock.

Bihler B-4/2 Welding Control System. Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Year of manufacture: 1988/04. Made in Germany. More Bihler and Bruderer machines on stock.

Rubber Air Spring, Vibratory mounts, Machine Feet, Machine Legs, Antivibratory feet, Leveling Feet, Heavy Duty Feet Load (Kg/pc): 1200 - 3400 Max. Pressure Bar: 6 Dimensions: S: 370mm D: 360mm H App: 111mm d: 200mm h: 8mm Bolt: M20 Four pieces on stock. Similar models that we can produce: TL1: Load (Kg/pc): 25 - 60 Max. Pressure Bar: 3 TL2: 80 - 300 Load (Kg/pc): Max. Pressure Bar: TL3: Load (Kg/pc): 270 - 800 Max. Pressure Bar: 5 TL4: Load (Kg/pc): 650 - 1500 Max. Pressure Bar: 6 TL6: Load (Kg/pc): 3000 - 6500 Max. Pressure Bar: 6 It can fit to Bruderer, Mabu, Schaal, Schuler, Haulich and other machines. For any questions please contact us.

Schaal SEP 40 Automatic Punching Press. Year of manufacture: 1993. Completely revised in 2023 with new Siemens PLC control. Nominal capacity: 400 [kN] (40 [t]). Min./Max. number of strokes: 100 – 500. Ram adjustment: 70 [mm]. Variable stroke: 8 – 70 [mm]. Ram surface area: 340 – 300 [mm]. Stroke range: 8, 10, 15, 20, 25, 31, 36, 41, 46, 50, 54, 58, 61, 64, 66, 68, 69, 70 [mm]. Table dimensions: 550 x 580 [mm]. Fitted with gripper feeding device SZV 2. Width of strip: 8 - 120 [mm]. Feed length: 2 – 80 [mm]. Feeding thickness: 0.1 – 2 [mm]. Feeding: 180 [°]. Feed accuracy: ±0.01 [mm]. Drive power: 7,5 [kW]. Dimensions (H x W x L): 2300 x 1600 x 1400 [mm]. Weight: 3800 [kg]. Including operating instructions in German and English and schematics included. Also on stock high speed presses: Mabu, Schaal, Bihler and other Bruderer models. Also Ideal BAS welders

BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Type: APE 250. Band saw blade pneumatic strip shears. Strip width up to: 250 [mm]. For straight rectangular and burr-free cutting off the bandsaw blades. Pneumatically operated for double cutting (two shear knives). Year of manufacture: 2016. On stock more Ideal BAS flash butt welding machines and automatic punching presses Bruderer, Mabu, Schaal, Bihler and more.

Type: LBS043 / 80 / 1.5 Coil joining machine. Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 [mm]. Used machine in working condition. Strip length: 15 – 80 [mm]. Strip width: 0.5 – 1.5 [mm]. Cvolfxlg Power: 400 [V] / 50 [Hz]. Equpied with pneumatic shears APE080 and smoothing device with roller. Cutting length: 80 [mm]. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Producer: Baust Werkzeugtechnik Complete production line for rotary punching of sheet metal or plastic. Rotary die cutting machine / Rotary punching machine Including de-coiler and un-coiler. Year of production: 1999. Coilers equiped with Lenze 5.5 [kW] motors. Sheet processor drive power 4.6 [kW]. Material thickness range: 0.4 - 1.5 [mm]. Material Yield strenght: 350 [N/pmm]. Equiped with Lenze motors and drives and Siemens SPS S7 control. Power: 3 x 400 [V] 5%. Frequency: 50 [Hz]. Control voltage: 24 [V]. max. Fuse: 63 [A]. Working modes manual or automatic. Including complete original operating instructions in German and schematics. On stock ready for delivery, including packing and loading. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]) Speed range: 80-400 [spm]. Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available ...

Description: Serial number: P5076870 Pressing force: 15 to For further technical data see type plate With press protection grid Manufacturer: LEINHAAS weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm

Machine Type: Eccentric Press Manufacturer: BERNINGHAUS Model No.: UPS V25/250 Condition: ready for use Offer Type: Used Machine Specifications: Compressive force: 25 t Projection: 250 mm Table: 550 x 425 mm Installation height: 330 mm Propulsion: 1.25 kW Remark: with Leinhaas press guard (protective screen), height-adjustable table, Foot release Weight: 1500 kg The machine is in a ready-to-use condition and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

pressure:100 t distance between columns:1180 mm stroke:1 - 120 mm no. of strokes:90 /min distance table/ram, stroke up:470 mm table surface area:1100 x 700 mm table height over floor:800 mm side window:400 mm ram surface:740 x 350 mm ram adjustment:100 mm power requirement:37,0 kW weight:11,0 t dimensions (WxDxH):2,3 x 2,0 x 3,5 m knuckle-joint press:hydraulisch angetrieben T-slots in table and ram acc. to specification:auf Anfrage foundation pit:nicht erforderlich