live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: Röhm / Bruckner, revolving center points 5 pieces -Type: Röhm 110H MK5 / Bruckner without type designation -Intake: MK5 -Price/delivery: complete -Transport dimension: 470/300/150 mm -Weight: 33.6 kg

revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center center -Manufacturer: Bruckner, rotating center point -Type: unfortunately without type designation -Recording: MK6 -Dimensions: Ø 120 x 350 mm -Weight: 12 kg ...

• more information

revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center point, centering taper -Manufacturer: Bruckner, rotating center point centering cone -Type: unfortunately without type designation -Recording: MK5 -Centering point: Ø 50 mm -Dimensions: Ø 120 x 315 mm -Weight: 9.6 kg

revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center point, centering taper -Manufacturer: Bruckner, rotating center point centering cone -Type: unfortunately without type designation -Recording: MK4 -Centering tip: Ø mm -Dimensions: Ø 58 x 203 mm -Weight: 1.6 kg

Steam capacity at 102 ºc of nutritious water --- 10000 kg / h Heat efficiency --- 6.5mW Permissible excess pressure --- 13 Bar Working pressure --- 12 Bar Water content --- 19 m³ Total water content --- 22.6 m³ Transport weight ---- 21,3 t Working weight --- 40.6 t Fuel --- Gas and diesel Manufacturer of water --- Weishaupt Type of water --- Weishaupt G 70 / 2A Water adjustment --- Modulated The heat is the voltage of the current volume --with full fire chamber --- 1.02 mW - without full fire chamber --- 1.21 mW Boiler efficiency - at 100% productivity --- 90% - at 50% productivity --- 90.5% Boilers are still running and video is available on request

UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888  ...

General SKUR1226 LocationBarneveld MakeAlpine Augsburg (D) Type710-CW No.15972 Year of construction1974 Main Features Motor55 KW Inlet diameter710 mm Specified Features - Pin Mill Pin disc millcheck 2 Driven rotorscheck Rotor size710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm With hoppercheck Inlet120x400mm Feeding with rotating valvecheck Motor(2x) size unknown ca. 55 kW each Pin Mills MaterialMild steel Information Floor space2,2x3,5 m Weight5000 Kg Floorspace2,3x2,2 M Total height2,3 MPin MillsAlpineMills > Pin MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price co ...

General SKUR1227 LocationBarneveld MakeAlpine Augsburg (D) Type710-CW Year of constructionunknown, manufacturer plate is missing Main Features Inlet diameter710 mm Specified Features - Pin Mill MaterialMild steel Pin Mills Pin disc millcheck 2 Driven rotorscheck Rotor sizedia 710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm Inlet120x400mm Feeding with rotating valvecheck Information Floorspace2,3x2,2 M Total height2,3 M Weight3500 KgPin MillsAlpineMills > Pin MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

Manufacturer: Wemhöner , Year: 1997, Type: Vario pin Presse, Control: Siemens S 5, Number of tables: 2, Automatisches Rüsten: yes, Pin-Sytem: yes, Heating system: Elekto, Nutzfläche : 1290 X 2500, min.Folienbreite: 1450, Min.-max. workpiece height in mm: 10-40, Press length mm: 2500, Pressing width mm: 1290, Work piece thickness max mm: 40, Membrane: yes, Foil magazin spaces: 4, Kammerdruck: 6 bar pneumatisch/360bar Hydraulschi, Through running machine: yes, Membrane: yes, Landing opening mm: ca.80, Längsdurchlauf: yes, Automatische Entleerung: yes, Through running machine: yes, FREE TEXT: Automatischer Folienozug mit Schneidanlage und Abnahmestation mit Wender/, Year :1997