Manufacturer: Brandt, Type: KTD 72, Year: 2002, Control: yes, Glue application: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Edgeband thickness max mm: 3, Thickness of coiled edgeband max mm: 3, Feeding speed max m/min: hand, Thickness of coiled edgeband max mm: 3, Inner circle min mm: yes, Total power kW: 8, Feeding speed max m/min: hand, Compressed air bar: 6, Wight approx. kg: 300, Required space L x W x H mm: 1500 x 1500 x1200, Year :2002

Static contour trimming machine for rounding off edges to softformed or postformed panels. The machine has a tracing roller and a trimming motor and carries out both symmetric and asymmetric copying work (by means of plc controlls). For the finishing a polishing brush has been built up additionally. Max. workpiece thickness: 55 mm. Max. workpiece width: 80 mm. Max. profile depth 80 mm. Max. edges thickness: 3 mm. Motor: 0,5 kW.

Description: machine number: 0-261-20-8279 workpiece thickness: 8 - 50 mm edge material thickness: 0,4 - 3 mm feed speed: 11 m/min extraction diameter: 3x80/1x100 mm pneumatics: 6 bar  , please also have a look at the PDF document of this machine serial number: 0-261-20-8279, edge thickness: 3 mm, workpiece thickness: 8 - 50 mm, feed: 11 m/min, Approx. Onsite Dimension. (l x w x h): 4,153 x 1,525 x 2,182 mm, weight approx.: 1,300 kg

Description: machine number 0-261-20-6375 edgeband thickness max 3 mm thickness of coiled edgeband max , ,  ,3 mm feedrate max 10 m/min corner rounding unit 1 motor scraper unit , ,  ,Profile scraper control , ,  ,BRANDT EASYCONTROL EC 10+ edgeband height max , ,  ,54 mm workpiece length min , ,  ,70 mm preheating zone , ,  , glue system granulate glue pot below feeding chain quick-change glue pot , ,  , trimming saw 2 motors flush/radius/chamfer milling units , ,  ,1 buffing unit , ,  , magazine for single strips , ,  , type right-side machine supply 400 ...

Description: Workpiece and edge parameters Workpiece width min: For workpiece thickness 8-22 mm | 70 mm For workpiece thickness 23-40mm | 120 mm For workpiece thickness 41-60mm , 150 mm depending on the workpiece length Workpiece protrusion | 38 mm Workpiece thickness | 8 - 60 mm Max. edge height = workpiece height, + 6 mm Edge material roll / 0.4 - 3 mm Edge cross-section max. For PVC | 135 mm For veneer | 100 mm Max. roll diameter , 830 mm Edge material strip , 0.4 - 15 mm (or 12 mm) (When using the VKNR 4845 exchange trimming unit, the max. edge thickness is 12 mm!) Max. edge cross-section For strips ' 600 mm If no radius is specified, R=2 mm is retracted and deliv ...

Description: Type of edging Thin edge Thick edge Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 11 m/min Maximum panel thickness 50 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 11 m/min Top pressure yes Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 5 NO. ED ...

Description: Max. panel height 55 mm Min. edge thickness 0.4 mm Max. edge thickness 12 mm Max. forward feed speed 13 m/min Pressure with idle wheels NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit automatic timed intervention motor power : 2.2 KW Edge coil magazine glue pot for EVA hot melt glue premelter for EVA hot melt glue Roller set to press the edge no. pressure roller 4 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 automatic timed intervention motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.55 KW r.p.m. : 11300 RPM NO. EDGE PROCESSING UNITS 3 Proce ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 14 m/min Maximum panel thickness 60 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 70 mm Min. edge thickness 0.3 mm Max. edge thickness 3 mm Max. forward feed speed 14 m/min Top pressure yes Pressure with idle wheels Panel support guides yes with positioning by NC yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Lamps to preheat the side of the panel yes Edge coil magazine yes no. positions 1 Gluing syste ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Max feed speed 9 m/min Maximum panel thickness 50 mm Operating Units 4 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 9 m/min Top pressure yes Pressure with idle wheels Panel support guides yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 3 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine  ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Corner Rounding Unit yes Max feed speed 11 m/min Maximum panel thickness 55 mm Operating Units 7 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 8 mm Max. forward feed speed 11 m/min Top pressure yes Pressure with idle wheels Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes No. Edge Processing Units 5 NO. EDGE PR ...