bowe p used for sale

--> Tilting kneader with double jacket Material : wetted areas in stainless steel Volume : 260 ltr. Usable volume: 200 ltr. Dimensions: L 2.60 m x W 1.20 m x H 1.35 m.

--> tilting kneader, with double jacket; Material : wetted areas in stainless steel Volume : 210 ltr. Usable volume: 160 ltr. Dimensions : L 2.40 m x W 1.15 m x H 1.35 m;

Drive : 200 KW Volume : 90 ltr. Usable volume: 63 ltr. Bucket speeds : 45.5 / 41.2 rpm Drive : 200 KW Engine speed : 1500 rpm Weight: ca. 11,5 to Weight gearbox: approx. 2950 kg.

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 50 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer wi ...

Drive gear to mains belt furnace NBO Winkler from spare parts warehouse unused

Electric motor, three-phase motor, pump motor -Manufacturer: Linn Pumps, pump motor without pump -Type: TP 80E -Power: 0.75 kW -Speed: 2900 rpm -Shaft: Ø 16 x 20 / 18 x 40 mm -Design: B3/B14 -Protection rating: IP54 -Dimensions: 328/157/H190 mm -Weight: 11.3kg

Level limit switch, level measuring device, sensor, switch, level transmitter -Pepperl+Fuchs Part No.: 103375 -Dimensions: 130/120/H30 mm -Weight: 0.2 kg

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 20 kV/100 V 120/1 A 4.156-0-4.156 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg

Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 30 kV/100 V 50 Hz 150/1 A 500-0-7500 kW -Price: per piece -Number: 2 pieces -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece

Philips Diagnost TH with the following system components Generator Optimus 50 Tube RO 1750 0.6/1.2 (ceiling hanging) Vertical tripod Diagnost VE/VT • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and equipped with Stretch film wrapped and can be picked up immediately • You buy the system in "as-is" condition ex warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation, commissioning and configuration of the plant or parts of the plant must be carried out by the manufacturer or by a by the manufacturer authorized specialist or technician!

Continuous/normal drilling capacity 18/20 mm Threading capacity M12 (depending on pitch) Lockers MK II Drilling depth 100 mm Projection 240 mm Column diameter 82 mm Usable work surface W x L 340 x 280 mm T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed indicator: Digital Drilling depth indicator: Digital Drilling depth stop: quickly adjustable stop ring Manual drill feed Table height adjustment with rack Motor three-phase current – frequency-controlled, 230 V, 0.75 kW Spindle speeds infinitely variable 30 – 3000 1/min Table work surface: 155 - 415 mm Footwork: 155 – 550 mm Machine dimensions: 355 x 705 x 1065 mm Weight: 170 kg Optional accessories: Drill package 3: with [felix] 2.0 100 Machine vice Flott [felix] 100, Quick-change drill chuck 3-16 mm (accuracy 0.17 mm), Kegeldorn MK 2 B18 and reducing sleeve MK 2 to Mk 1 � ...

Depalletizer is used for unloading new bottles, delivered on pallets. After clamping one whole row from bottles layer by gripping head, the device delivers them to the unloading table, and the bottles are transported to the washing machine or filling machine. - Capacity up to 6 000 bottles / hr. - Operation - 1 person - Dimensions of bottles: - diameter 20 to 120 mm - height from 50 to 350 mm - Lifting height to 4m, - lifting capacity – to 40 kg - Lifting speed - 7m / min - Speed - 7 m / min - Enviroment temperature - 5 to 45 degrees C - Total power requirement - 0,8 kW - Air Pressure - 0.5 - 0.6 MPa / stable /

Brotschneidemaschine verwendet. Sehr guter Zustand.

Connection line, connection cable, cable line, socket cable, socket line -Manufacturer: Festo, socket cable unused Ovp -Type: KMYZ-9-24-2,5-LED-PUR-B -Mat no.: 193786 -Number: 4x available -Price: per package -Dimension package: 200/180/H10 mm -Weight: 0.1 kg/piece

Technical data for the shelf connector: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 250 mm Cross-section: U 50x25 mm Material color: sendz. galvanized Weight: 0,29 kg | Pcs.

Emergency generator set 200 kVA Volvo / WA-V 200 S Machine Execution: Unit type: Stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine type: TAD 733 GE Engine No.: 5312956418 Motor power: 201 KW Cooling: Water-cooled Power: Electric 12 V DC Speed: 1,500 rpm Fuel: heating oil or diesel B7 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 044 M M 6S/4 Gen.Nr.: 39786300005 Generator capacity: 200 kVA Voltage: 400 / 231 volts Power factor: cos. - phi 0.8 Speed: 1,500 rpm Switchgear: Version: Automatic start Tank: Design: Base frame tank with drip tray Dimensions of the unit: Width approx. mm: 1.200 Height approx. mm: 2.200 Length approx. mm: 3.600 Weight approx. KG: 3.550 Use: Condition: Demonstration machine Year of construction: 2023 Delivery time: immediatel ...

Laminator Peak PP-450 HR; good condition; cleaned and tested; Working width 450mm; .max. Strength 350mic.; temperature range 100-160 C'; Speed 650mm/min.; Table unit. Laminating machine Peak PP-450 HR; good condition; cleaned and checked; working width 450mm; max.thikness 350mic.; temperature 100-160C'; Speed 650mm/min.; table top machine.

Emergency generator set 100 kVA Volvo Penta / WA-V 100 S Machine Execution: Unit type: Stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine type: TAD 531 GE Engine No.: in production Motor power: 102 KW Cooling: Water-cooled Power: Electric 12 V DC Speed: 1,500 rpm Fuel: heating oil or diesel B7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: UCI 274 C1 Gen.Nr.: N22B053121 Generator capacity: 100 kVA Voltage: 400 / 231 volts Power factor: cos. - phi 0.8 Speed: 1,500 rpm Switchgear: Version: Automatic start Tank: Design: Base frame tank with drip tray Dimensions of the unit: Width approx. mm: 1.150 Height approx. mm: 1.950 Length approx. mm: 3.000 Weight approx. KG: 1.920 Use: Condition: Demonstration machine Year of construction: 2023 Delivery time: immed ...

Frequency converters, frequency converters, drive converters, controllers, inverters -Manufacturer: Siemens, Sinamics Power Module 240 -Input: 3 AC 380-480 V 31.5 A 50/60 Hz -Motor: IEC 7.5/11 kW -Dimensions: 340/190/H290 mm -Weight: 12.7 kg

Technical data for the shelf connector: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 300 mm Cross-section: U 50x25 mm Material color: sendz. galvanized Weight: 0,33 kg | Pcs.

swing diameter: 430 mm centre height: 450 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 690/400 V 50 Hz 150/1 A 0-150 kW -Number: 4x devices available -Price: per piece -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece

Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 575/332 V 50 Hz 3000/1 A 500-0-3000 kW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg

Technical data for the shelf connector: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 900 mm Cross-section: U 50x25 mm Material color: sendz. galvanized Weight: 1,01 kg | Pcs.

swing diameter: 430 mm centre height: 450 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 88 teeth -Weight: 9,5 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 176 teeth -Number: 20x saw blades available -Price: per piece -Weight: 10 kg/piece

Peri Trio length compensation 270 x 36 and 120 x 36. For closing residual dimensions without wall thickness compensation or passwood from 6cm - 36cm Length compensation 270 x 36 a. 50,00€/ piece + VAT Length compensation 120 x 36 a. 30,00€/ piece + VAT purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

Tool holder, milling holder, milling tool, test mandrel -Test pin: Ø 50 mm, with tip -Adjustment: SK50 -Dimensions: Ø 97 x 350 mm -Weight: 5.3 kg

Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Phoenix Contact, Fiber optic cable -Type: I-VH11Y 2K200/230 10A17 8B20 HCS Rugged -Length: 83 m -Price: complete -Dimensions roll: Ø 500 x 410 mm -Weight: 10 kg

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Manufacturer: Phoenix Contact, fiber optic cable -Type: AT-VQHB2Y -Application area: outdoor use -Length: 72 m -Price: complete -Dimensions roll: Ø 500 x 370 mm -Weight: 14 kg

Specifications: Manufacturer: BITO Pro Version: right 24311 The scope of delivery includes: 01x Holder for push-through protection, used Material color: sendzimir galvanized Total width: approx. 93 mm Total depth: approx. 93 mm Opening dimension for profiles: approx. 51 x 46 mm (HxW) Material thickness: approx. 3.00 mm Number of hooks: 2 hooks Grid spacing: approx. 50 mm Weight/ pcs.: 0,192 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available -Price: per piece -Weight: 6 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 18 mm -Number of teeth: 120 teeth -Weight: 6 kg

Specifications: Manufacturer: BITO Pro Version: left 24310 The scope of delivery includes: 01x Holder for push-through protection, used Material color: sendzimir galvanized Total width: approx. 93 mm Total depth: approx. 93 mm Opening dimension for profiles: approx. 51 x 46 mm (HxW) Material thickness: approx. 3.00 mm Number of hooks: 2 hooks Grid spacing: approx. 50 mm Weight/ pcs.: 0,189 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm - Bolt circle: Ø 100 x 17 mm -Number of teeth: 80 teeth -Number: 4x available -Price per piece -Weight: 5.7kg/pcs

-Year 1990, Jogger with air press roller -Max paper size 1450x1130 mms. -Blowing plane -Folding squares on both sides -Height of introduction 16.5 cm -Max operating pressure 6-7 bar -380 V power supply

The scope of delivery includes: 01x Shelf connector, used Manufacturer: Dexion Type: P90 for shelf spacing: approx. 300 mm Total length: approx. 380 mm Cross-section: U 51 x 25 mm Material color: sendzimir galvanized Weight: 0,47 kg | Pcs.

Bosch PKS vacuum packing machine for coffee Packed in 250 g and 500 g packages Year 1994 / renovated in 2017 Good working condition

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Pacoma, single-acting hydraulic cylinder, 133 mm stroke -Type designation: 3483441M91 43 L 01 -Cylinder: outer Ø 75 mm -Piston rod: Ø 60 mm -Dimensions: 325/75/H120 mm -Weight: 8.6 kg

Specifications: Manufacturer: Dexion Type: P90 The scope of delivery includes: 01x Console for push-through protection, used Material color: sendzimir galvanized consisting of: 01x bracket, used 02x internal parts, used 02x hex bolts M10x25 02x nuts 02x washers Ø 10,5

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Manufacturer: Stork-Packo, conveyor belt with high load capacity -Type: SAL-HE 10 -Metal belts: belt width 2 x 150 mm -Conveying length: approx. 2200 mm -Drive: without drive motor -Dimensions: 2350/460 / H210 mm -Weight: 127 kg

Cutting length: 4300 mm Cutting height: 2150 mm automatic: , ELCON precision panel saw type D 215 ----------------------------------------------------- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----------------------------------------------------- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length ...

150 Litre kettle. Gas energy / Propan-butan

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Parker, hydraulic cylinder stroke 600 mm -Type: C-3LRLS29MC -Piston rod: Ø 88 mm -Admission: shaft Ø 25/10 mm -Piston: Ø 127 mm -Pmax: 100 bar -Dimensions: 1070/210 / H140 mm -Weight: 66 kg

Technical data for the compensating plate: Manufacturer: Polypal The scope of delivery includes: 01x compensating plate, used Total width: approx. 130 mm Total depth: approx. 85 mm Material thickness: approx. 1.50 mm Borehole Ø: approx. 15 mm Number of boreholes: 2 pcs. Weight: approx. 0.12 kg | Pcs.

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston diameter: 20 mm -Piston rod: Ø 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27/188 mm -Weight: 0.3 kg/piece

Refurbished Plate format: 470 x 470 mm Dimensions: approx. 2700 x 1100 x 1800 mm Chamber depth: 25 mm Content:190 litres Operating pressure: 10 / 12 bar Cloud entrance: flange 11/2", central Number of plates: 44 plates Material sheets:Polypropylene Material cloths: PP 5322 (black) with felt edge Design: open filtration Closing pressure: max. 310 bar via double-acting cylinder Painting: primed and lacquered in RAL 5010, filtrate channel + drip tray in plastic, 950 mm for container height on operator side Engine hydraulics Warranty - 12 months, excluding wear parts

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN50 -Width: 230 mm -Nominal pressure: PN16 -Dimensions: 230/165/H300 mm -Weight: 10.2 kg