british flag
Resale Logo

bonding semi automatic used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information dealer of used printing presses  IMPRIMERIE UNAL  http://www.imprimerie-unal.com 
banner logo
start page > keywords bonding semi automatic > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121686987 205

SCM ACCORD 40 for sale
Numerically Controlled Machining Centres


Working centre SCM model ACCORD 40: General details: - useful working area 4250 x 2280mm - panel passage 330mm - automatic centralized lubrication - optimized and centralized dust extraction system - control with P ...
used machine
 
Working centre SCM model ACCORD 40:
General details:
- useful working area 4250 x 2280mm
- panel passage 330mm
- automatic centralized lubrication
- optimized and centralized dust extraction system
- control with PC OFFICE, with program XILOG PLUS
- CE norms , with frontal carpets and side protection nets
Working plane:
- multi-functional aluminium plane
- 2 vacuum pumps 250 mc/h (5,5 kw each)
- 3 side reference strokes
- possibility of "alternate/pendulum working"
- laser projector on the plane
Operating groups:
- working unit PRISMA at 5 axis, HP 15 at liquid cooling, attack HSK63 ,
served by tools changer at 12 positions on the machine (RAPID 12)
- boring unit F18 with:
12 vertical and 6 horizontal chucks
integrated blade unit
2010
Price  
  IT   request
121686801 109  

ATLAS COPCO GA 708 PE for sale
Screw air compressor Atlas Copco GA 708 PE


Screw air compressor Atlas Copco GA 708 PE Fully automatic, internally fully piped and wired compressor plant in very low noise compact structure; single-stage oil injected compressing, lufgefkühlt. Usable volume fl ...

 
Screw air compressor Atlas Copco GA 708 PE

Fully automatic, internally fully piped and wired compressor plant in very low noise compact structure; single-stage oil injected compressing, lufgefkühlt.
Usable volume flow rate, in accordance with DIN in 1945 at the outlet from the compact system measured and related to Ansugbedingungen pe at maximum operating pressure: 8 bar 122 1/s; 7.32 m ³/min

The compression system is designed for operating pressures of 4 to 8 bar

Main features:
-integrierten after cooler with water separator and autom. Condensate drain. An oil separator ensures low oil pressure air
-vollautomatische full load idle intermittent control with manual selector switch for Druchlaufbetrieb for economic compressor operation

Technical data:
Speed of the Haupläuffers: 4.020 min
-Leistungsbedraf including fans, based on the compressor shaft at working pressure pe: 8 bar 53.1 kW
7 bar 49.7 kW
6bar 46.3 kW
at idle, 16.5 kW
Noise level measured according to CAGI Pneurop at 1 meter distance: 74 dB(A)
Cooling air volume 108 m³/min
Compressed air outlet temperature 32 ° C
-Umgebungstempereatur max 40 ° C
Oil fill quantity 38 L
Residual oil content of compressed air 5 mg / m ³
Dimensions (Lxwxh) 2770 x 1136 x 1600 mm
Weight 1020 kg

Technical data of electric equipment, make Siemens:
Three-phase motor with squirrel-cage rotor
Rating 55 kW
Nominal speed 3000 rpm
Voltage / frequency 380 V 50 Hz
Protection class IP 23 F
Design B-5

 
Price  
    request
121686796 102

DEAWOO Puma 300 LMB for sale
CNC Turning Machines


Year 2002 CNC Fanuc 18i-T Max rotating diameter on the bed 670 mm Max rotating diameter on the carriage 450 mm Max working diameter on the bed 355 mm Max working length 583 mm Max working bar diameter 76 mm Spindl ...
used machine
 
Year 2002
CNC Fanuc 18i-T
Max rotating diameter on the bed 670 mm
Max rotating diameter on the carriage 450 mm
Max working diameter on the bed 355 mm
Max working length 583 mm
Max working bar diameter 76 mm
Spindle ASA A2-8
Spindle speed 35-3000 rpm
Chuck diam 254 mm
Spindle power 18,5/22 kW
Spindle hole 86 mm
X axis 250 mm
Z axis 680 mm
C axis +- 360°
Rapid X/Z axis 20/24 m/min
Turret BMT-65 12 (driven) positions
Driven tool speed 40-4000 rpm
Driven tool power 1,5/5,5 kW
2 axial driven tools
2 radial driven tools
Tailstock
Presetting
High pressure coolant system 6 bar
Chip conveyor
Automatic sliding doors
Steady rest predisposition
2002
Price  
  PL   request
121686792 832

HEIDELBERG Stahlfolder TH 56/644 automati for sale
Folding machines


width 56 cm age 2008 rotary feeder RFH 1. station: 6 folding pockets 56 cm automatic pocket setting automatic roller setting following knife shaft noise absorbing hood 2. station: 4 folding pockets 56 cm automat ...
used machine
 
width 56 cm
age 2008
rotary feeder RFH
1. station: 6 folding pockets 56 cm
automatic pocket setting
automatic roller setting
following knife shaft
noise absorbing hood
2. station: 4 folding pockets 56 cm
automatic pocket setting
automatic roller setting
following knife shaft
noise absorbing hood
3. station: 4 folding pockets 56 cm
automatic pocket setting
automatic roller setting
following knife shaft
stacking delivery SBP 46
noise absorbing hood
3.station age 2013
Delivery time: 1 - 2 months
Ref: HE170588A

Please ask for price.

We ship and install worldwide!
2008
Price  
    request
121686758 708

BITZER 6H-35.2 for sale
Chillers


Compressor Selection: Semi-hermetic Reciprocating Compressors Compressor model: (6H-35.2) Mode: Refrigeration and Air conditioning Reference temperature: Dew point temp Liq. subc. (in condenser): 0 K Suction gas tem ...
used machine
 
Compressor Selection: Semi-hermetic Reciprocating Compressors
Compressor model: (6H-35.2)
Mode: Refrigeration and Air conditioning
Reference temperature: Dew point temp
Liq. subc. (in condenser): 0 K
Suction gas temperature: 20,00 °C
Operating mode: Auto
Power supply: 400V-3-50Hz
Capacity Control: 100%
Useful superheat: 100%
--------------------------
Technical Data

Displacement (1450 RPM 50Hz): 110,5 m³/h
Displacement (1750 RPM 60Hz): 133,4 m³/h
No. of cylinder x bore x stroke: 6 x 70 mm x 55 mm
Weight: 235 kg
Max. pressure (LP/HP): 19 / 28 bar
Connection suction line: 54 mm - 2 1/8''
Connection discharge line: 35 mm - 1 3/8''
Connection cooling water: R 3/4''
Oil type R134a/R407C/R404A/R507A/R407A/R407F: tc<55°C: BSE32 / tc>55°C: BSE55 (Option)
Oil type R22 (R12/R502): B5.2 (Standard)
Oil type R290/R1270: SHC226E (Standard)
 
Price  
  DE   request
121686748 102

EMCO E 65 TCM - BigBore 95 for sale
CNC Turning Automatics


EMCO cnc lathe mod E 65 TCM - big bore 95 / BJ. 2009 / 2 axes + C axis / cnc Siemens Sinumerik 810 D including ShopTurn and revolver 12 x / 12 powered tools / bars Max Ã? 95 / 24 kW / MK 4 / 60-3200 min1 / tailsto ...
used machine
 
EMCO cnc lathe mod E 65 TCM - big bore 95 / BJ. 2009 / 2 axes + C axis / cnc Siemens Sinumerik 810 D including ShopTurn and revolver 12 x / 12 powered tools / bars Max Ã? 95 / 24 kW / MK 4 / 60-3200 min1 / tailstock / 3D simulation / chip promotion / feed PZI 100 / S Tang loader EMCO - 1200 LM / good condition
Fe.gi.Maschinen.SBG.at

EMCO cnc lathe mod E 65 TCM - big bore 95 / year 2009 / 2 axles + C axis / cnc Siemens Sinumerik 810 D including ShopTurn / revolver 12 speed / 12 driven tools / bars Max Ã? 95 / 24 kW / MK 4 / 60-3200 min1 / tailstock / 3D simulation / chip conveyance / chuck PZI 100 / bar loader EMCO - LM 1200 / good condition
Fe.gi.Maschinen.SBG.at
1995
Price  
    request
121686737 101

WOLF T 11 for sale
Column drilling machine Wolf T 11


Column drilling machine Manufacturer: Wolf Type: T 11 Machine number: 30616 Column diameter: 150 mm Spindle mount MT 3 / 46 mm with quick-action Chuck Automatic feed Speeds 8 x 1550,1050,750, 500, 320, 21 ...

 
Column drilling machine

Manufacturer: Wolf
Type: T 11
Machine number: 30616

Column diameter: 150 mm
Spindle mount MT 3 / 46 mm with quick-action Chuck
Automatic feed
Speeds 8 x 1550,1050,750, 500, 320, 215, 150, 95 RPM.
140 mm stroke
Table size diameter 400 mm with T-slots
Height 550 mm
Throat depth 360 mm

Voltage 380 Volt
KW 1.5
 
Price  
    request
121686709 502

PRESONA PRESONA LP 40 EH 1 for sale
Baling presses


automatic baler Manufacturer: PRESONA Type: LP 40 EH 1 technical data: Pressing force: 40 t specific pressing force: 5.05 kg / cm² Power: 15 kW Capacity: 160 m³/h Filler: 1,250 x 1,100 mm Channel form ...
used machine
 
automatic baler

Manufacturer: PRESONA

Type: LP 40 EH 1


technical data:
Pressing force: 40 t
specific pressing force: 5.05 kg / cm²
Power: 15 kW
Capacity: 160 m³/h
Filler: 1,250 x 1,100 mm
Channel format: 720 x 1,100 mm (H x W)
Bale weights: up to approx. 525 kg
Setting: 5 x vertical
Oil: approx. 600 ltr. capacity
Machine weight: 15 tons

Optional with:
-Infeed conveyor
Conveyor width: 1,000 mm
Length: approx. 8,600 mm
-large wire scrolling devices
1995
Price  
  KW   request
121685793 836

KOLBUS GD Casemaker Kolbus GD for sale
Book cover manufacturing machines


We have for sale Kolbus GD 1978 year Cover size max. 560x405 mm Cover size min. 110x155 mm Cardboard thickness up to 3 mm / pp. 300 grm² Mechanical speed 10 to 16 cases/min. automatic feeding covering material, ...
used machine
 
We have for sale Kolbus GD
1978 year
Cover size max. 560x405 mm
Cover size min. 110x155 mm
Cardboard thickness up to 3 mm / pp. 300 grm²
Mechanical speed 10 to 16 cases/min.
automatic feeding covering material,
automatic feeding hard spine insert and side boards,
automatic soft spine insert feeding from roll,
Good condition
Available immediately
1978
Price  
  PL   request
121669746 101

MAG SPECHT 500 DUO for sale
Numerically Controlled Machining Centres - Universal


Main spindles – motor spindles power requirement at 100% ED kW 2 x 31 torque at 100% ED Nm 2 x 50 spindle rotation speed rpm 1 – 16.000 speed ranges no. stepless spindle diameter in front bearing mm 2 x 80 bea ...
used machine
 
Main spindles – motor spindles
power requirement at 100% ED kW 2 x 31
torque at 100% ED Nm 2 x 50
spindle rotation speed rpm 1 – 16.000
speed ranges no. stepless
spindle diameter in front bearing mm 2 x 80
bearing lubrication 2 x greased for lifetime
Tool holder system DIN 69893-1 HSK-A 2 x 63
insertion force Nm 2 x 20 kN
Working area A-axis
distance between spindles 720
travel – X-axis mm 2 x 630
travel – Y-axis mm 2 x 630
travel – Z-axis mm 2 x 880
indexing – A-axis degree 360.000 x 0.001°
workpiece and fixture interference circle diameter mm 900
fixture width mm 2 x 700
loading capacity kgs 2 x 600
Axes speed
X- / Y- / Z-axis m/min 60
Axes acceleration
X- / Y- / Z-axis m/s² 6
Tool magazine
magazine stations no. 32
tool length max. mm 550
tool diameter with loaded adjacent stations mm 80
tool diameter with empty adjacent stations mm 250
tool weight max. kgs 12
total loading capacity of the magazine kgs 200
Electrics
electrics – voltage / frequency V/Hz 380/50
Machine dimension and weight
basic machine – space requirement approx.. mm 8.450 x 3.450
height of the machine incl. machine cover mm 4.340
machine weight approx.. kgs 23.000

Accessories and further Information:

- the workpiece is loaded by a 6-axis robot make KUKA, type KR150-2 with 400 mm
arm extension
- CNC-Control System SIEMENS 840D sl
- remote maintenance
- tool breakage control with mechanical scanning
- automatic tool changer
- spindle version with internal coolant
- coolant attachment with belt filter device and
- cooling lubricant with increasing pressure – 37 l/min, 50 bar, 50µm
- return pump station with chip separation
- 2 unit spiral chip conveyor
- automatic loading and unloading in front
- interface for loading automation

The machine was only used for a short time in production due to a product
changeover.

2011
Price  
    request
121669362 109

KARL KLINK RISH 10.1250.500.A for sale
Broaching Machines - Vertical


working area traction force max. KN 100 broaching stroke max. mm 1.250 table plate with mm 500 tool-feeder stroke max. mm 630 broaching speeds m/min 1 – 10 reversing speeds m/min 1 – 23 total cycle time sec  ...
used machine
 
working area
traction force max. KN 100
broaching stroke max. mm 1.250
table plate with mm 500
tool-feeder stroke max. mm 630
broaching speeds m/min 1 – 10
reversing speeds m/min 1 – 23
total cycle time sec 24
Electrics and connected load
electrics – voltage / frequency V/Hz 400/50
total connected load kW 45
Machine dimension and weight
space requirement incl. auxiliary units mm 5.000 x 4.490
machine height mm 4.500
Machine weight approx. kgs 9.000
hydraulic unit and electric cabinet kgs 2.500

Accessories and further Information:

double column table-up broaching machine
installation at floor level with no pit or operator platform
control SPS SIEMENS S7
automatic part feed
1 unit hydraulic unit
1 unit electric cabinet
coolant attachment
magnetic chip conveyor
complete covered
oil mist extraction

With the machine, the internal toothing of wheel hubs was produced.

2005
Price  
    request
121669360 206

KALLESOE A/S K 20 / E for sale
Carcass clamps


Automatic corpus press KALLESOE A / S type K20 / E year 1998 Engine No. No. 33938 / 98 This special designed body press K20E is made for the production of cabinets. The special body press spans together a whole ward ...
used machine
 
Automatic corpus press KALLESOE A / S type K20 / E year 1998
Engine No. No. 33938 / 98

This special designed body press K20E is made for the production of cabinets.
The special body press spans together a whole wardrobe in a single operation, including shelves, sides and rear paneling.
The parts of the Cabinet are held by fixtures and vacuum heads before the Cabinet is compressed.
The range is set 4 ball screws which compress even the Cabinet.
A servo motor ensures that each clamping clamping pressure is equal.
The machine is controlled via a touch panel: the corpus press is set automatically on the basis of entered dimensions and values on the correct measure and the correct clamping pressure.
The here shown special body press is ready for shipment
the finished cabinets equipped with an underlying belt railway with roles.

Technical data
Clamping width min./max.: 190/1200 mm
Clamping height Min/Max: 200/1200 mm
Clamping depth min./max.: 200/400 mm
Working height: 500/1000 mm

Specifications subject to

Automatic case press KALLESOE A / S type K20 / E year of manufacture 1998
Machine no. No. 33938 / 98

This specialized case press K20E is designed for the production of cabinets.
The special corpus press clamps on entire cabinet together in a single operation, including shelves, sides and rear panelling.
The parts of the cabinet are held in place by holding devices and vacuum heads, before the cabinet is compressed.
The edge width is adjusted via 4 ball screws, that so compress the cabinet.
A servo motor ensures that the edge pressure is the same for every clamping operation.
The machine is controlled via a touch panel: the body press is automatically switched on and off by means of a touch panel.
of the entered dimension and values are set to the correct dimension and clamping pressure.
The case press special shown here is designed for further transport.
of the finished cabinets are equipped with a belt conveyor with rollers behind it.

Technical specifications
Clamping width min. / max.: 190/1200 mm
Clamping height min. / max.: 200/1200 mm
Clamping depth min. / max.: 200/400 mm
Working height: 500/1000 mm

Technical data subject to change
1998
Price  
    request
121669344 802

RYOBI 522 HX for sale


-Two colours max paper size 37x52 cms. straight machine -Year 1997, Only 15 mil. impressions -Ryobimatic dampening, Quick clamps -AAC Automatic Aqua Control with cooling unit, Automatic registers -Plate punch, all ac ...
used machine
 
-Two colours max paper size 37x52 cms. straight machine
-Year 1997, Only 15 mil. impressions
-Ryobimatic dampening, Quick clamps
-AAC Automatic Aqua Control with cooling unit, Automatic registers
-Plate punch, all accessories, in production now
1997
12,000 €  
  IT   request
121653301 805

KBA Rapida 72-5 for sale


-Five colours straight machine max size 52x72 cms. -Year 1996, 48 mil. impressions -KBA Colortronic table control with ink and plate registers -Alcool dampening with chiller -Automatic Plate loading -High pile deliv ...
used machine
 
-Five colours straight machine max size 52x72 cms.
-Year 1996, 48 mil. impressions
-KBA Colortronic table control with ink and plate registers
-Alcool dampening with chiller
-Automatic Plate loading
-High pile delivery
-IR dryer, Manual preset of the paper, Oxydry powder spray
-Automatic blanket washers
-Rebuilt few months ago, in production, complete with all accessories
1996
76,000 €  
  IT   request
121636956 202

HOFMANN TFS 1200, stufenlose Drehzahl for sale
Swivel spindle cutter, rotary cutter


Sturdy swivel milling machine TFS1200 by Hoffmann from vocational school with stepless speed adjustment Drive motor 5 / 6, 2kW with automatic motor brake R/L barrel Swivel angle from - 5 to 45 degrees electrically a ...
used machine
 
Sturdy swivel milling machine TFS1200 by Hoffmann from vocational school with stepless speed adjustment

Drive motor 5 / 6, 2kW with automatic motor brake
R/L barrel
Swivel angle from - 5 to 45 degrees electrically adjustable with digital display
Height adjustment electrically adjustable with digital display and in Krems Valley display
Speeds in 100 steps adjustable from 1000 to 10000 RPM
Spindle diameter 30 mm
Control Panel up, swivel
Comfort fence with fine adjustment by Handwheel and display of the total stop (as in incremental Valley counter null-adjustable), additional display of the single jaw
Stop rotating and elevating device away swiveling (for arc milling etc.)
pull-out workpiece support
2 AB table extensions with inset wood
Aigner integral stop 500 mm on both sides
3-roll feed Holzher 1117 with 8 speeds, R/L barrel, almost as good as new
New roles
Feed socket
Dust nozzle 2 x 120 mm
Emergency stop switch
Original condition, school machine

Dimensions approx. 1450 x 1300 x 1700 mm (Lxwxh). Weight approx. 1300kg.

Please the PDF file with our terms and conditions and order form.
The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider".
1994
9,400 €  
    request
121632752 805  

KBA RA 162-5 for sale


Maximum Size: 1200 x 1620 mm Full automatic plate change system FAPC VARIDAMP dampening Ink, Dampening and register control COLORTRONIC All automatic washers INTERCOM Refrigeration BALDWIN Powder spr ...
used machine
 
Maximum Size: 1200 x 1620 mm

Full automatic plate change system FAPC

VARIDAMP dampening

Ink, Dampening and register control COLORTRONIC

All automatic washers

INTERCOM

Refrigeration BALDWIN

Powder spray WEKO

Impression count: 149 millions
2003
Price  
  PT   request
121632737 203

WEINIG HYDROMAT H23C for sale
Four-sided planing machines


-machine in stock -After reviewing the technical -very good condition -year of manufacture 2001 TECHNICAL PARAMETERS: PLANER: -planing width 230 mm -planing height 180 mm -spindle diameter 50 mm -the maxim ...

 
-machine in stock
-After reviewing the technical
-very good condition
-year of manufacture 2001

TECHNICAL PARAMETERS:

PLANER:
-planing width 230 mm
-planing height 180 mm
-spindle diameter 50 mm

-the maximum diameter 220 mm

-the feed rate to 80 m/min
-adjustable feed on the inverter

1) head the lower 15 kW
2) head right 11 kW
3) head left 11 kW
4) upper head 11 kW
5) upper head 18 kW
4) lower head 22 kW

-electrically height-adjustable
-electrically adjustable upper heads
-pneumatic clamps

-cardan shafts feed
-five top steel roller
-the two upper rollers, rubber
-four rolls in the worktop extending

-auxiliary pressure on the left of the head
-the last two heads on podtrzymkach
-nozzle diameter 140 mm

SYSTEM ADMINISTRATION:
-packet length 6100 mm
-width: 1200 mm
-height 1300 mm
-the possibility of stacking two packages at the same time
-for
-the brackets to the narrow items
-chain feeder 2500 mm
-initial material segregation
-Cross-feeder Planer 1500 mm
-hydraulic Accelerator

SYSTEM:
-conveyor 7000 mm
-the receiving table transverse conveyor 2100 mm
-receiving rollers-powered 6000 mm
-receiving roller and adjustable flame launchers, 7100 mm
-gravity rollers receivers

Automatic line strugaj?ca Weinig is a system for improving productivity, while increasing its efficiency. Solutions of this type are directed to the companies that make the process of automation of production facilities. Planing process elements is operated by two persons who are responsible for the initial choice of material and the reception. The principle of operation of the line shall be as follows, the material is delivered with a forklift on the chain conveyor, which thanks to its long sleeps two packages at the same time. This affects directly the effectiveness as it unfolded one of the operator can immediately place again at the right place, without downtime caused by not delivering material by fork-lift truck. Rozsztalowania system tilts the entire package and raises it at the same time, releasing the single guides layers that directly hit the chain feeder. The individual elements at this stage pass prequalification for those suitable for planing and waste. Material not suitable for further processing is separated by an operator who has a position at this stage, who, through the button adjusts the rollers stop line continuity by what material falls under the tray and does not goes to the Planer. Material that has passed segregation and is suitable for further stage goes through gravity rollers for another chain feeder. At the end of the feeder is equipped with a system of rollers and hydraulic Accelerator, which is responsible for moving items from the tray to the Planer Weinig Hydromat H23C. Planing process then takes place elements that has the possibility of processing them at speeds up to 80 m/min. Integrated system of elements after the planing them tape feeder table transverse equipped with automatic system dump the material. At this stage, ready to cross conveyors transporting it over the core. Material when you hit the Skate moved
is them to ejectors which expel material on gravity rollers where they are received by the employee. The line is the ideal solution for companies who appreciate the quality and the efficiency of the elements. Planer is able to meet even the most demanding expectations, while the system input and output only to increase its performance.
 
Price  
  PL   request
121632735 104

KEHREN L 25 S - 8 cnc for sale
Surface Grinding Machines


GO vertical grinding machine - mod. L 25 S - 8 cnc / 1992 / loop length 2500 mm / grinding width 830 mm / workpiece height 400 mm / magnetic table 2500 x 800 mm / grinding motor 110-550 kW - rpm / segment head diameter  ...
used machine
 
GO vertical grinding machine - mod. L 25 S - 8 cnc / 1992 / loop length 2500 mm / grinding width 830 mm / workpiece height 400 mm / magnetic table 2500 x 800 mm / grinding motor 110-550 kW - rpm / segment head diameter 900 mm / segments 210 x 120 x 40 mm / cnc Siemens Sinumerik 3 G / grinding motor feed: 0,5 to 35 m / min -infinitely variable / coolant flow: 1000 l / min / coolant tank: 8000 lt / dresser with adjustable axle only for segment head / new SchleifmaÃ?e can be entered in the Sinumerik, which is then also the grinding head automatically to the required height adjust / good condition
Fe.gi.Maschinen.SBG.at

RETURN 25 S - 8 cnc surface grinding machine - vertical mod L / year 1992 / grinding length 2500 mm / grinding width 830 mm workpiece height 400 mm / magnetic table 2500 x 800 mm grinding motor 110-550 kW / segment head diameter 900 mm / step 210 x 120 x 40 mm / cnc Siemens S inumerik 3 G / grinding motor feed: 0.5 to 35 m / min - infinitely variable / coolant flow rate: 1000 l / min / coolant tank: 8000 lt / dresser with adjustment axis only for segment head / new grinding dimensions can be entered into Sinumerik, in which case the grinding head automatically adju STS to the appropriate height / good condition
Fe.gi.Maschinen.SBG.at
1992
Price  
    request
121632726 301

ARBURG 270V 500-150 for sale
Injection molding machines


OVERVIEW: Brand: Arburg Model: 270V 500-150 Application type: Injection moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1997 Production hours: 106863 Location: Germa ...
used machine
 
OVERVIEW:
Brand: Arburg
Model: 270V 500-150
Application type: Injection moulding
Machine type: Injection Moulding Machine
Availability: Immediately
Construction year: 1997
Production hours: 106863
Location: Germany
Origin country: Germany

GENERAL DATA:
Measurements width: 3615 mm
Measurements depth: 2085 mm
Measurements height: 1990 mm
Machine weight: 2250 kg
Automatic cycles: 13520148
Type of drive: Hydraulic
Closure: Hydraulic

CONTROL UNIT:
Brand: Arburg

INJECTION UNIT:
Heating capacity: 4 x 1.2 kW
Adjustable heating zones: 4
Nozzle pressure: 60 kN

CLAMPING UNIT:
Clamping force: 500 kN
Opening stroke: 350 mm
Max. open daylight: 550 mm
Distance between bars (h x v): 320 mm
Size of mold platens: 405 mm
Ejector stroke: 125 mm
Ejector force for / back: 30 kN

MEDIA:
Main electronic connection: 400 V / 50 Hz / 3 P
Power consumption: 24.7 kVA
Oil tank: 160 L
1997
Price  
  DE   request
121632723 301

ARBURG 270S 500-150 for sale
Injection molding machines


OVERVIEW: Brand: Arburg Model: 270S 500-150 Application type: Injection moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 2000 Production hours: 79620 Location: German ...
used machine
 
OVERVIEW:
Brand: Arburg
Model: 270S 500-150
Application type: Injection moulding
Machine type: Injection Moulding Machine
Availability: Immediately
Construction year: 2000
Production hours: 79620
Location: Germany
Origin country: Germany

GENERAL DATA:
Measurements width: 3125 mm
Measurements depth: 1115 mm
Measurements height: 1850 mm
Machine weight: 2250 kg
Automatic cycles: 13086699
Type of drive: Hydraulic
Closure: Hydraulic

CONTROL UNIT:
Brand: Arburg

INJECTION UNIT:
Heating capacity: 4 x 2.1 kW
Adjustable heating zones: 4
Nozzle pressure: 70 kN

CLAMPING UNIT:
Clamping force: 500 kN
Opening stroke: 350 mm
Max. open daylight: 575 mm
Distance between bars (h x v): 320 mm
Size of mold platens: 472 mm
Ejector stroke: 125 mm
Ejector force for / back: 30 kN

MEDIA:
Main electronic connection: 400 V / 50 Hz / 3 P
Power consumption: 22 kVA
Oil tank: 160 L
2000
Price  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter