british flag
Resale Logo

block making plants used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information dealer of used printing presses  IMPRIMERIE UNAL  http://www.imprimerie-unal.com 
banner logo
start page > keywords block making plants > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121632680 706

COENCO 10.000 hl for sale
Brewhouse / brewery plant


Brewhouse for 10.000 hl p.a., built 2012, dismantled and stored, for sale with: - 2-roller-malt mill, 800 kg/h, with malt conveyors, set of magnets, malt hopper; as too flour mill type SK2500 for 850 kg/h for Meura pres ...
used machine
 
Brewhouse for 10.000 hl p.a., built 2012, dismantled and stored, for sale with:
- 2-roller-malt mill, 800 kg/h, with malt conveyors, set of magnets, malt hopper; as too flour mill type SK2500 for 850 kg/h for Meura press, with Auger, set of magnets, extra buffer tank
- Brewhouse, make CoEnCo, in stainless steel, with Pre-masher type Alloysius; brewblock with mash-/wort vessel 20 hl net / 40 thl total content, with agitator, isolated, and lautertun 20 hl net content, with agitator, isolated, with s/s false bottom, spent grains hatch, control cabinet with Siemens Simatic Touch Panel; Filter buffertank, 22 hl content; Meura-mash filter built 2015; heat exchanger 30 hl/h; hot water tank 45 hl content
- Steam generator, make Fulton, for 320 kg steam/h, gas, with water treatment plant on chassis, condensate tub, pump, chimney.
2012
375,000 €  
    request
121632671 702

KÖNIG Eco Twin for sale
Systems for bread rolls


It is a used King Brötchen system with King to sell eco twin classic head machine (year 2007). The following products can be produced with this compact system: Kaiser rolls, salt bread and long rolled German rolls. It' ...
used machine
 
It is a used King Brötchen system with King to sell eco twin classic head machine (year 2007). The following products can be produced with this compact system: Kaiser rolls, salt bread and long rolled German rolls.
It's a clean and fully functional bread plant. This was used as a second system and was only reduced in use. Incl. punching for Kaiser rolls, salt bread, pressed sandwiches and Housky (see pictures).

-Execution 600mm, 4-way series
-Overall length: 3, 80m (maximum width: 1, 15 m)
-Automatic puller (dough pieces directly on fermenting tray lays off)
-Quick-change Stüpfelwerkzeuge and cutting stations
-Stainless steel
-Operation via touch Simatic Panel
-entire plant on base with wheels
-Weight range King classic head machine: 50gr. -110gr. (dependent on dough)
-Weight range provers eco twin: 50gr. -80gr. (dependent on dough)
-Hourly output form rolls (Kaiser, salt,...): 4500 PCs / h

Price on request.
2007
Price  
    request
121632666 101

GILDEMEISTER NEF 400 for sale


CNC universal lathe Gildemeister NEF 400 With control Siemens Sinumerik 840 D powerline Year of construction: 2005 O bed circulation: 400 mm Circulation O plan sliders: 270 mm Turning length: 650 mm Spindle bore: ...
used machine
 
CNC universal lathe Gildemeister NEF 400

With control Siemens Sinumerik 840 D powerline
Year of construction: 2005
O bed circulation: 400 mm
Circulation O plan sliders: 270 mm
Turning length: 650 mm
Spindle bore: 65 mm
Plan travel (X): 220 mm
Plan travel (Z): 700 mm
Speed maximum 4000 U/min

With the following accessories:
Sliding screen design with interior lighting
8-speed revolver
Tailstock with Quill
3 jaw Chuck hydraulic 0 210 mm (SMW car block)
Chip conveyor
Coolant system
Operating instructions
2005
Price  
    request
121632663 1300

BLITZ Monsun Pro 7,5S for sale
srew compressor complete plant


Complete system with compressed air dryer on 500 ltr. Boiler Manufacturer: Flash Model: Monsoon Pro 7.5 S Year of construction: 2006 Pressure: 10 bar Electric motor: 7,5 kW Quantity: 0, 89 m ³/min Hours: 11160 S ...
used machine
 
Complete system with compressed air dryer on 500 ltr. Boiler
Manufacturer: Flash
Model: Monsoon Pro 7.5 S
Year of construction: 2006
Pressure: 10 bar
Electric motor: 7,5 kW
Quantity: 0, 89 m ³/min
Hours: 11160
Sound pressure level 64 dB
Dimensions: 190 x 105 x 190 cm
Weight: 595 kg
2006
2,700 €  
    request
121632658 1300

ATLAS COPCO GA 30 VSD FF for sale
srew compressor variable speed


Screw compressor frequency controlled with integrated compressed air dryer Manufacturer: Atlas Copco Model: GA 30 VSD FF Built in 2000 Pressure: 7-13 bar Engine power: 30 kW Quantity: 4, 6 m³/min Hours: 8346 Dim ...
used machine
 
Screw compressor frequency controlled with integrated compressed air dryer
Manufacturer: Atlas Copco
Model: GA 30 VSD FF
Built in 2000
Pressure: 7-13 bar
Engine power: 30 kW
Quantity: 4, 6 m³/min
Hours: 8346
Dimensions: 210 x 95 x 170 cm
Weight: 800
Filter + oil change prior to delivery
2000
Price  
    request
121632630 709

SOREN diverse for sale
dough-making line


Plant was only for test purposes in operation! Production as well as cooling down and ventilation of masses. performance: approx. 1200 kg/h Condition: like new Inspection: by appointment Composition: Flour =  ...
used machine
 
Plant was only for test purposes in operation!

Production as well as cooling down and ventilation of masses.

performance: approx. 1200 kg/h
Condition: like new
Inspection: by appointment

Composition:
Flour = 30-40%
Water = 60- 70%

inlet temperature: + 30 ° C
outlet temperature: + 4 °
outlet density: approx. 400g/ltr.

Pos. 1
continuous mixer for masses
- Capacity max. 1,200 kg/h
- Base frame made of tubular stainless steel construction with bottom-mounted, height-adjustable machine feets
- Product receiving hopper for receiving continuously supplied dough components
- Dosing screw AE = 90mm made of stainless steel AISI 316 for the supply of dry components, driven by frequency controlled 0.75 kW three-phase current geared motor with adjustable speed
- additional connection flange for continual feeding of the liquid components

1 piece double-walled mixing cylinder made of stainless steel AISI 316, with integrated horizontal stainless steel mixing shaft, driven by frequency-controlled 4 kW three-phase current geared motor with adjustable speed

2 pieces flushing connections for circulation of a heating cooling medium
- Product outlet opening with connection piping to the following intermediate tank
- Connecting flange for connection to a customer supplied CIP cleaning system
- Connecting piping for connection of the individual components

1 piece stainless intermediate container 100 ltr.
- positioned immediately next to the above-named continuous mixer
- Capacity approx. 100 liters
- built on tubular stainless steel frame with bottom-mounted, height-adjustable machine feets
- Limit switch secured, hinged container lid
- Connection fitting for product infeed on tank top
- built-up stirring tool for continuous product movement, driven by three-phase current geared motor with constant speed (25 rpm)
- integrated level monitoring via Liquiphant brand Endress + Hausser, type FTL 360
- Product outlet opening with 90 °C connecting piping to the replicating progressing cavity pump
- bottom-mounted manually operated stainless steel flap valve DN100

1 piece CSF eccentric screw pump for supplying the mass to the following scraped surface heat exchanger
- built on stainless steel base frame
- Rotor shaft made of stainless steel AISI 304, driven by frequency-controlled 2.2 kW three-phase current geared motor with adjustable speed
- Replaceable stator made of food-approved elastomers, version, adapted to the mass used
- integrated magnetic table inductive flow meter of the brand Endress + Hauser
- Control via subsequent scraping heat exchanger

1 piece stainless 2 compartment pipe filter system
- in detail consisting of:
- 2 pieces tubular stainless steel filter cartridges with removable tubular stainless steel filters
- Manually operated 3-way valve made of rust-free stainless steel for alternating operation of the filters
- Required connecting bore for connection to the piping system
- Mounting materials

2 pieces scraped surface heat exchangers SSHE Mod.HD 804
- product input temperature max 30 ° C
- product outlet temperature min + 4 ° C
- Product cylinder made of stainless steel AISI316L
- Wiper blade made of stainless steel AISI316L
- Blade made of stainless steel AISI316L
- each powered by 15 kW electric geared motor with constant speed
- insulation by means of mineral wool
- Outer cylinder made of stainless steel AISI316L
- refrigerant glycol,
Temperature range -12 ° C,
Flow rate up to 12,000 Ltr./h

2 piesces glycol water control systems with modulating 3-way control valves
each consisting of:
- 3 pieces stainless steel ball valves 1 1/4 "
DN 40
- 1 pc. GEMÜ water valve
- 1 pc. GEMÜ limit switch
- 1 pc. Solenoid valve
- 1 pc. SAMSON 3-way valve DN 40
to -50 ° C
- 1 piece Transmitter
- 2 pieces Thermometers
- 1 piece pressure gauge 0-10 bar for water
- 1 piece safety valve
- 1 piece piping system incl.
Flange parts, fastening material etc., piping
electrically welded and polished inside
Glands executed acc. DIN 11851

1 piece flow rate measuring system
- brand Endress + Hauser
- Type Promag 53H, DN 40

1 piece air dosing system
complete including air flow measuring system

1 piece stainless steel cabinet to hold all necessary load controls
in detail consisting of:
- Dimensions (WxHxD): 1200 x 900 x 300 mm
- Degree of protection IP65 outside, IP20 inside
- Integrated main switch as well
Motor protection switches, motor contactors, transformers and
voltage monitoring
- Automation via Simens S7-300
including the required signal conditioning instruments,
analog and digital input and output cards
- Operation via Siemens color touch panel type MP277, integrated in the control cabinet door
- complete including Programming, circuit diagram creation, operating and maintenance instructions
2013
Price  
    request
121632597 1001  

Tilting tables 11,30 x 3.40 m


3 PCs. gebr. Hydr. Tilting tables Button: 11.30 x 3.40 m Steel base plan Incl. 2 hydraulic cylinders

 

3 PCs. gebr. Hydr. Tilting tables

Button: 11.30 x 3.40 m

Steel base plan

Incl. 2 hydraulic cylinders

 
Price  
    request
121632595 1001  

Flat cars 10 x 2.50 m


4 PCs. gebr. Flat cars Schalfäche per train: approx. 10 x 2.50 m = Steel base plan Incl. Thermoölheizschlangen

 

4 PCs. gebr. Flat cars

Schalfäche per train: approx. 10 x 2.50 m
=

Steel base plan

Incl. Thermoölheizschlangen
 
Price  
    request
121632585 1001  

SKAKO MOB 2000 for sale
Concrete machines for mixing (mobile)


1 gebr. Concrete mixing plant Fabr. SKAKO MOB 2000 Transportable as semi-trailers Capacity: 60 m³ / h Mixer size: 2 cbm = 6-Chamber Reihendoseur

 

1 gebr. Concrete mixing plant

Fabr. SKAKO MOB 2000


Transportable as semi-trailers

Capacity: 60 m³ / h


Mixer size: 2 cbm
=

6-Chamber Reihendoseur

 
Price  
    request
121632570 1200

LIMBURG - LATHAM 3.600 kg dry product / 24 h for sale
Dewatering Station with Membrane Filter Press


Dewatering Station with Membrane Filter Press for Kieselguhr Sludge This complete dewatering station was designed by Limburg for Kieselguhr waste dewatering in to semidry cakes for easy waste disposal. The process is ...
used machine
 
Dewatering Station with Membrane Filter Press for Kieselguhr Sludge

This complete dewatering station was designed by Limburg for Kieselguhr waste dewatering in to semidry cakes for easy waste disposal. The process is suitable also for dewatering other type of sludges. Actual dewatering is made with Latham side bar membrane filter press which reaches over 50 % dry (by weight) content of waste cake, inlet sludge being between 10 and 20 % dry content Filter press is equipped with an automatic cloth washing system and an automatic cake discharge. Shaker bars for discharge and plate opening and closing functions are hydraulically operated (Limburg Cake Release Control System). Cloth washing is made in cycles and during the wash cycle, wash arm will individually wash one chamber at a time. Process includes a sludge tank with agitation, sludge and water pumps, filtrate water tank with pump, filter press with auxiliaries, supporting structures and control cabinet with Siemens Simatic S 7-400 PLC and Siemens OP 7 display. Equipment was delivered in year 2000 and it is still installed and in good operational condition.

Technical data:
Made by Limburg – Latham
Made in year 2000
Inlet sludge dry content 10 – 20%
Capacity max 3600 kg dry product / 24 hours
Cake dry content > 50% by weight
Filtrate dry solid content < 2 % by weight
Latham filter press Side bar membrane 630
Total filter area 6.9 m2
Total chamber volume 99.8 dm3
Plate size 630 mm
Working pressure 7 barg
Number of chambers 12 (expandable to 15)
Plate transport Automatic, multiple cake discharge
Membrane filtration pump 159 litres / min
Sludge tank 6 m3, AISI 316L
Sludge tank agitator 0.75 kW, 80 rpm, blade 660 mm
Sludge pump capacity 511 litres / min
Filtrate tank 1.5 m3, AISI 316L
2000
Price  
  FI   request
121615002 703

LEFA TSFR 100-2-Wagen Elektro for sale
Smoke and Cooke Chamber


Used liquid smoke system LEFA, type: X. 100-2 electric car In the used State - Elektroheizregister - liquid smoke unit with nozzle - cooling unit - 3-way liquid smoke valve block for air, water and liquid smoke - cooking ...
used machine
 
Used liquid smoke system LEFA, type: X. 100-2 electric car In the used State - Elektroheizregister - liquid smoke unit with nozzle - cooling unit - 3-way liquid smoke valve block for air, water and liquid smoke - cooking and cleaning unit
-Skewer length: 1,000 mm
-Type of heating: electric
-for 2 car

The plant is located in the butcher's condition and is ready for use immediately. Inspection and test run are possible by arrangement like.
2003
Price  
    request
121614979 1300

LECO Truespec CHN – S for sale


Coal analysis laboratory equipments Automatic analyser for solid fuels Make: model: LECO CHN Truespec – S year: 2010 total sulfur in ash from coal, filler CHNS elemental analysis For sale exclusively on next 6 Dece ...
used machine
 
Coal analysis laboratory equipments
Automatic analyser for solid fuels
Make: model: LECO CHN Truespec – S year: 2010 total sulfur in ash from coal, filler CHNS elemental analysis
For sale exclusively on next 6 December at 11 to Valleggia of Quiliano
For more information contact us at 0307751645.
2000
20,000 €  
  IT   request
121614975 308

LEMO Lemo DKT 850 for sale
bag making m/c


carrier bags with handle reinforcement (glued) -SERVO machine for PE films, feed 200-600 mm, bottom gusset 30-80 mm -unwinding maximum foil width 1,600 mm -maximum 220 cycles/min to see in production
used machine
 
carrier bags with handle reinforcement (glued)
-SERVO machine for PE films, feed 200-600 mm, bottom gusset 30-80 mm
-unwinding maximum foil width 1,600 mm
-maximum 220 cycles/min
to see in production
1999
Price  
    request
121614967 1300

LEMO 850 DKTL for sale
Plastic Bag Converting Machine


Material width: 1600mm max., bag height: 300-800mm, bag width: 200-600mm, speed: 100m/min/ 220cycles/min max., glue types: Henkel Q8733, Ulitex HK 717, glue consumption:
used machine
 
Material width: 1600mm max., bag height: 300-800mm, bag width: 200-600mm, speed: 100m/min/ 220cycles/min max., glue types: Henkel Q8733, Ulitex HK 717, glue consumption: <3g/m², unwinder width: 1600mm max., roll diameter: 1200mm max., welding and cutting width: 850mm max., slip film unwinding width: 140mm max., slip film roll diameter: 1200mm max, bottom fold depth: 30-80mm, length: 12945mm, width: 2605mm, height: 3300mm.
1999
Price  
  DE   request
121614737 1300

Trolley for container stack, trolley for boxes


<b>Properties</b> With spring loaded platform 2 fixed wheels 2 without roll Plastic guard running around 45x65mm Product platform: 450 x 650 mm 4 springs to lower the container stack Height: 99 ...
used machine
 
<b>Properties</b>

With spring loaded platform
2 fixed wheels 2 without roll
Plastic guard running around 45x65mm
Product platform: 450 x 650 mm
4 springs to lower the container stack
Height: 990mm up to ironing
Color: Silver
Roll diameter: 200 mm
Material: Stainless steel <b>dimensions</b>

Length: 780mm
Width: 580mm
Height: 990mm
 
120 €  
    request
121614630 1401

JUNGHEINRICH MP for sale
Pallet rack - 6505 x 14100 x 1100mm - 7500 kg


Pallet rack - approx. 6.505 x 14,100 x 1.100 mm - 6,000 kg - Jungheinrich MP Here a very well-preserved, used pallet rack - called also heavy load shelving - offered the manufacturer Jungheinrich. With the help of the ...
used machine
 
Pallet rack - approx. 6.505 x 14,100 x 1.100 mm - 6,000 kg - Jungheinrich MP

Here a very well-preserved, used pallet rack - called also heavy load shelving - offered the manufacturer Jungheinrich. With the help of the supplied pins attach securely the bars, making impossible an accidental lifting out of the stands.

We have also other storage shelves or high shelves and accessories in used, as well as in new condition in stock. If you are interested, we look forward to your call.

We also recommend us as a supplier of complete storage and operating facilities. Request our printed catalogue.

Dimensions and loads:
-Shelf height approx.: 6.505 mm
-Shelf width approx.: 14.100 mm
-Shelf depth approx.: 1100 mm
-Tray width approx.: 2.700 mm
-Load capacity: 1,500 kg .
-Box load: 6,000 kg in a buckling length of up to 1,300 mm .

under uniformly distributed load

Properties:
-Manufacturer: Jungheinrich
-Model: MP
-Year of construction: 2008
-Used, in very good condition
-Pallet places: 75 units
-Stand in Blue - Cross-arms in yellow
-Shelves are degraded and available by arrangement, or ready for pickup.
-The stands are already pre-assembled

Scope of delivery:

1 Basic shelf and 4 mounting racks comprising:
-6 stands: 6.505 x 1,100 mm
-40 bars: approx. 2,700 x 85 x 40 mm
-Safety pins
-Load signs

All information without guarantee.
Available on request with chipboard floors and connectors of rows of.

Lagertechnik Becker GmbH offers only used pallet racks, which withstand EN 15635 professional Assembly, after a check.

Dimensions and loads (approx.):

Height: 6.505 mm
Width: 14.100 mm
Depth: 1,100 mm
Compartment width: 2.700 mm
Load capacity: 1,500 kg
Field capacity: 6,000 kg

Data:

Manufacturer: Jungheinrich type: MP condition: used, very good stand: Blue bars: yellow included:

Pallet places: 75 PCs.
Basic shelves/cultivation racks: 1/4 PCs.
Stand: 6 PCs.
Bars: 40 PCs.
Locking pins: incl.
Load tags: incl.


You can pick up this article by appointment at our warehouse in Krefeld, Germany. Of course, we deliver you the articles also in the House. To do this we will create an offer you. Please have understanding that we can call you free shipping without the zip code of your delivery address. We cooperate with several carriers, which operate different routes. Your advantage: We can gain the best transport price for you. Please contact them before you buy.
2008
1,550 €  
    request
121614624 1401

STOW for sale
Pallet rack - 7000x34760x1000mm - 9000 kg


Used pallet rack - approximately 7,000 x 34.760 x 1,000 mm - 9,000 kg - stow Here very well preserved, used pallet racks - called also heavy load shelving - offered the manufacturer of Stow. With the help of the suppl ...
used machine
 
Used pallet rack - approximately 7,000 x 34.760 x 1,000 mm - 9,000 kg - stow

Here very well preserved, used pallet racks - called also heavy load shelving - offered the manufacturer of Stow. With the help of the supplied pins attach securely the bars, making impossible an accidental lifting out of the stands.

We have also other storage shelves or high shelves and accessories in used, as well as in new condition in stock. If you are interested, we look forward to your call.

We also recommend us as a supplier of complete storage and operating facilities. Request our printed catalogue.

Dimensions and loads:
-Shelf height approx.: 7.000 mm
-Shelf width approx.: 34.760 mm
-Shelf depth approx.: 1,000 mm
-Tray width approx.: 4,850 or 4860 mm
-Load capacity: 2,000 kg .
-Box load: 9,000 kg in a buckling length of up to 1,900 mm .

under uniformly distributed load

Properties:
-Manufacturer: Stow
-Year of construction: 1998
-Used, in very good condition
-Stand in Blue - Cross-arms in orange
-Shelves are degraded and available by arrangement, or ready for pickup.
-The stands are already pre-assembled

Scope of delivery:

1 Basic rack and 6 mounting racks comprising:
-8 stand: approx. 7,000 x 1,000 mm
-48 bars: about 4,850 x 160 x 50 mm
-8 cross-bars: approx. 4,860 x 160 x 50 mm
-Safety pins
-Load signs

All information without guarantee.

Lagertechnik Becker GmbH offers only used pallet racks, which withstand EN 15635 professional Assembly, after a check.

Dimensions and loads (approx.):

Height: 7.000 mm
Width: 34.760 mm
Depth: 1,000 mm
Compartment width: 4,850 mm
Compartment width: 4,860 mm
Load capacity: 2,000 kg
Field capacity: 9,000 kg

Data:

Manufacturer: Stow condition: used, very good stand: Blue bars: orange included:

Basic shelves/cultivation racks: 1/6 PCs.
Stand: 8 PCs.
Bars: 56 PCs.
Locking pins: incl.
Load tags: incl.


You can pick up this article by appointment at our warehouse in Krefeld, Germany. Of course, we deliver you the articles also in the House. To do this we will create an offer you. Please have understanding that we can call you free shipping without the zip code of your delivery address. We cooperate with several carriers, which operate different routes. Your advantage: We can gain the best transport price for you. Please contact them before you buy.
1998
2,288 €  
    request
121614618 1401

DEXION for sale
Pallet rack - 7,5x19x1,2m - Dexion


Used pallet rack - (Hxwxd) approx. 7,500 x 18.900 x 1200 mm - with deep ridges - Dexion Here very well preserved, used pallet racks - called also heavy load shelving - offered the manufacturer of Dexion. With the help ...
used machine
 
Used pallet rack - (Hxwxd) approx. 7,500 x 18.900 x 1200 mm - with deep ridges - Dexion

Here very well preserved, used pallet racks - called also heavy load shelving - offered the manufacturer of Dexion. With the help of the supplied pins attach securely the bars, making impossible an accidental lifting out of the stands.

We have also other storage shelves or high shelves and accessories in used, as well as in new condition in stock. If you are interested, we look forward to your call.

We also recommend us as a supplier of complete storage and operating facilities. Request our printed catalogue.

Dimensions and loads:
-Shelf height approx.: 7,500 mm (about 4,250 mm increased to approximately 7,500 mm)
-Shelf width approx.: 18,900 mm
-Shelf depth approx.: 1200 mm
-Tray width approx.: 2,245 mm
-Load capacity: 1,500 kg .
-Box load: 6,000 kg in a buckling length of up to 2,000 mm .

under uniformly distributed load

Properties:
-Manufacturer: DEXION
-Used, in very good condition
-Pallet places: 80 pieces
-Stand in blue and zinc - trusses in red
-Shelves are degraded and available by arrangement, or ready for pickup.
-The stands are already pre-assembled

Scope of delivery:

1 Basic shelf and 7 mounting racks comprising:
-9 stand: approx. 7,500 x 1.200 mm
-64 traverses: approximately 2,245 x 85 x 50 mm
-128 depth bars, bright zinc-plated
-Safety pins
-Load signs

All information without guarantee.

Lagertechnik Becker GmbH offers only used pallet racks, which withstand EN 15635 professional Assembly, after a check.

Dimensions and loads (approx.):

Height: 7,500 mm
Width: 18,900 mm
Depth: 1,200 mm
Compartment width: 2,245 mm
Load capacity: 1,500 kg
Field capacity: 6,000 kg

Data:

Manufacturer: DEXION condition: used, very good stand: Blue - galvanized truss: Red included:

Pallet places: 80 PCs.
Basic shelves/cultivation racks: 1/7 PCs.
Stand: 9 PCs.
Bars: 64 PCs.
Depth bars: 128 PCs.
Locking pins: incl.
Load tags: incl.


You can pick up this article by appointment at our warehouse in Krefeld, Germany. Of course, we deliver you the articles also in the House. To do this we will create an offer you. Please have understanding that we can call you free shipping without the zip code of your delivery address. We cooperate with several carriers, which operate different routes. Your advantage: We can gain the best transport price for you. Please contact them before you buy.
 
2,391 €  
    request
121596395 201

MADREW DCKLR-40/3 for sale
Multi-blade saws


Is designed for transverse przyrzynania boards and lumber to the desired length. Is widely used in wood plants such as:p who manufacture pallets. Advantages: -high performance, -flexible and reliable feed dri ...

 
Is designed for transverse przyrzynania boards and lumber to the desired length.

Is widely used in wood plants such as:p who manufacture pallets.

Advantages:

-high performance,

-flexible and reliable feed drive material
-high cutting accuracy,
-simplicity, reliability and safe operation
-year of production 2000

TECHNICAL SPECIFICATIONS

-Maximum cutting thickness-120 mm
-The minimum cutting length-400 mm
-Maximum cutting length-3700mm
-Maximum width storage 250 mm

-The diameter of the used discs pi?owych-400 mm
-Engine power drive spindle saws-3 kW
-Supply voltage: 3 × 220/380 V N + PE
-Total power 9.75 KW
-Number of turns of the spindles pi?owych 2900 RPM
-Feeding motor power 0.75 KW
-Infinitely variable feed speed 5 -25 m/min.

OVERALL DIMENSIONS:

-Maximum width – 1400 mm
-The maximum length of the machine-4600 mm
-The maximum height of the machine – 1400 mm

-DTR and CE

Weight-950 kg
 
Price  
  PL   request
121595373 1200

HOLVRIEKA AND DIZIO outdoor, vertical, cooled for sale
Fermenting Tank CCT 910 hl Holvrieka/Dizio


Fermenting Tank CCT 910 HL Holvrieka / Dizio Conical cone fermenting tanks (CCT) with gross capacity 910 HL and net 800 HL. All tanks are identical, made either by Hovrieka or by Italian DIZIO Costruccioni Meccaniche  ...
used machine
 
Fermenting Tank CCT 910 HL Holvrieka / Dizio

Conical cone fermenting tanks (CCT) with gross capacity 910 HL and net 800 HL. All tanks are identical, made either by Hovrieka or by Italian DIZIO Costruccioni Meccaniche S.p.A - all made in year 1987. Tanks are vertical outdoor type with 150 mm PU insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. Tanks have mechanical cooling control as well as product handling valve system and outside on tank skirt, there are two sample taking valves. The cones has been refurbished / modernized by changing sample taking valve and adding level sensor. Generally tanks are in good condition and they have a high hygienic level.

Technical Data
Made by Holvrieka / Dizio
Made in year 1987
Number of tanks 36 pcs
Type Outdoor vertical
Insulation 150 mm PU
Volume gross / net 910 / 800 HL
Design pressure 1.5 bar + statistical pressure
Cooling media Glycol - water solution
Cooling zones 3 (including cone)
Tank inner diameter 4800 mm
Total height 9775 mm
1987
Price  
  FI   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter