blema gotha used for sale

Roller leveler VEB BLEMA GOTHA Germany Strip max thickness 6 mm, max width 1650 mm 7 + 8 work rolls, diameter 110 mm, 3 rows of supports with hydraulic setup, hydraulic unit included 27 kW AC main motor very good condition, complete and ready for operation, still on foundations in our plant

Straightener, straightener, VEB BLEMA GOTHA UBR 20X1600 / 1-10 sheet rolling machine. Machine for straightening sheets up to 20 mm thick and up to 1600 mm wide. The mill was hardly used because it was the second machine in the plant and served as a spare machine. Currently un-exploited. The machine is undergoing modernization, a completely new control system. The possibility of adapting to the customers needs (extension with roller feeders, receiving, the possibility of sanding rolls and rollers, etc.). Technical data : - year of production: 1983 - sheet thickness: 20 mm - sheet width: 1600 mm - upper straightening rolls: 5 pcs - lower straightening rolls: 6 pcs - rolling speed 10 m / min - engine power: 37 kW - engine power: 2 x 18.5 kW - engine power: 1,1 kW - engine power: 1,1 kW - weight: 39150 kg

pressure: 160 t dayligth: - mm stroke: 8 - 160 mm table surface area: 900 x 900 mm cutting surface: 5500 mm² column travel -side: 560 x 560 mm distance between columns: 950 mm ram adjustment: 125 mm number of strokes - idle run: 42 min-1 table height: 800 mm clamping plate thickness: 100 total power requirement: 18,5 kW weight of the machine ca.: 13,9 t dimensions of the machine ca.: 2,415 x 2,17 x 4,03 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Characteristics are shown in the photo Without documentation Bought at the Kirov factory in St. Petersburg.

Pressing force: 2500kN, throat depth: 450mm, ram stroke: 40-160mm, weight: 16,2t, including documentation.

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation.

offer 22537 Specifications: - working width 4040 mm - cutting capacity St 40 6 mm - Cutting angle hydro.adjustable 0.5 - 3 ° - Cutting gap adjustment hydr. - Number of hydraulic hold-downs 22 pcs -Mot. – Backgauge with positioning control 10 - 1000 mm - front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 p/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - with: - E-foot switch - Cutting line lighting - Pneumatically supported sheet metal lifting

sheet width - max.: 1020 mm plate thickness: 1,5 mm cutting length: 1020 mm weight: ca. 300 kg dimensions of the machine ca.: 1,3 x 0,8 m Side stop: 600 mm Material place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1600 mm material thickness: 6,30 mm no. of straightening rolls: 15 diam. of the rolls ca.: 100 mm total power requirement: kW weight of the machine ca.: 28 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAX 20 X 1600

material width: 2000 mm material thickness: 10,00 mm no. of straightening rolls: 13 sheet thickness - min.: 3,00 mm diam. of the rolls ca.: 145 mm straightening feed: 16 m/min barrel length ca.: 2330 mm middle distance of straightening rolls: 150 mm back-up rolls ca.: 290 mm No. of supports up / down: 3/3 main drive motor: 30 kW total power requirement: kW weight of the machine ca.: 32 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two-stage gearbox, gearbox, two-stage Getriebewerk Gotha SÜU11BA01 i1 = 17,43 i2 = 8.6 input speed max: 1742 rpm input power: 17 KW input: shaft diameter: Ø 45 mm, shaft length: 90 mm, groove width: 14 mm pulley: diameter: Ø 275 mm, Groove width: 10 mm, 8 grooves Output: Hollow shaft diameter: Ø 42 mm, with wedge hub profile 8 x 36 x 42 x 7 Flange: Ø 235 / 292 mm bolt circle diameter: Ø 260 mm, 8x threaded hole: M16 x 2.0, depth 25 mm Gear foot: 860 x 365 mm 8x Bore: Ø 21.5 mm Material ( housing ): Cast iron Replacement gearbox for plastic molding machine TRUSIOMA EI-45 ! used, tested ! Dimensions: 1050 x 680 x 440 mm

THE MACHINE CAN BE VIEWED AT THE LOCATION D- 99868 GOTHA BY APPOINTMENT. Specifications: - max. working width 4050 mm - max. cutting capacity St 40 4 mm - hydr. Cutting angle adjustment - Number of strokes depending on cutting angle and cutting length approx. 20 - 25 pro/min - Motor backgauge 10 - 1000 mm - Cutting length adjustment - Hydraulic hold-downs - front angle stop - front support arms - Rear space protection - Pneumatic connection 6 bar - Drive 400 V / 9 kW - Foot switch - Space requirement without support arms approx. W 4450 x H 1900 x D 2100 mm - Weight approx. 9000 kg

lechrichter, used,       sheet leveller, used,   Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of     straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed   ...

Centrifugal fan, centrifugal fan, centrifugal fan LUFTTECHNIK GOTHA LPTD Z 125-4 2x Pneumatic wheel: Ø 150 x 155 mm Motor : VEM, ELEKTROMOTORENWERK GRÜNHAIN ELM 992-B1 ( ELM992-B1 ) 0,0,09 kW 220 V AC 1270 rpm 4x Input: Ø 120 mm 2x output: 220 x 110 mm 2x flange ( outlet ): 275 x 165 mm used, tested ! Dimensions: 880 x 300 x 320 mm

Centrifugal fan, centrifugal fan, centrifugal fan LUFTTECHNIK GOTHA LRMN 160/1W Flow rate: 0,2 / 0,41 m3/sec ( 720 / 1476 m3/h ) pneumatic wheel: Ø 250 mm engine : VEM KMERa 71 K2 0,37 kW 2750 rpm 220 / 380 V 3AC input: Ø 155 mm Output: 140 x 140 mm New ! Dimensions: 410 x 400 x 530 mm

Centrifugal fan, centrifugal fan, centrifugal fan VEM, LUFTTECHNIK Gotha LRMN250/4W TGL 180-1407 Flow rate: 2200/ 4100 m3/h Total pressure difference: 98 / 121 kp/m² Density: 1,,2 kg/m3 temperature: 85 °C impeller: Ø 300 mm Motor : AS/100L28-4 2,2 kW 1420 rpm 220 / 380 V 3AC 50 Hz IP33 Intake opening: Ø 250 mm Output: 225 x 225 mm used, tested ! Dimensions: 760 x 700 x 830 mm

Centrifugal fan, centrifugal fan, centrifugal fan VEM, AIR TECHNOLOGY Gotha LRMN160/3W TGL 180-1407 Flow rate: 380/ 850 m3/h Total pressure difference: 70 / 27 kp/m² Density: 1,,2 kg/m3 temperature: 20 °C impeller: Ø 250 mm Motor : KMR 63 K2 ( KMR63K2 ) 0,37 kW 2750 rpm 220 / 380 V 3AC 50 Hz IP44 Intake opening: Ø 160 mm Output: 140 x 140 mm New ! Dimensions: 600 x 550 x 690 mm

Centrifugal fan, centrifugal fan, centrifugal fan LUFTTECHNIK GOTHA LRMN 160 flow rate: 0,2 / 0.41 m3/sec ( 720 / 1476 m3/h ) pneumatic wheel: Ø 250 mm engine : VEM KMR 71 K2R 0.55 kW 220 / 380 V 3AC 2850 rpm input: Ø 160 mm output: 140 x 140 mm New ! Dimensions: 410 x 380 x 530 mm

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

Key data: 2500 mm, 16 mm

Machine type: sheet leveller Stock number: 0997 Make: WMW GOTHA Type: UBR 16 x 2500 /1-10 Year of construction: 1976 Sheet width: 2500 mm Sheet thickness: 16 mm Smallest sheet thickness: 6 mm Number of straightening rollers: 11 Roller diameter: 180 mm Straightening roller diameter: 180 mm Target speed: 10-16-20 m/min Flow speed: 10 m/min Total power requirement: 75 kW Machine weight approx.: 46 t

material width: 2500 mm material thickness: 16,00 mm no. of straightening rolls: 11 sheet thickness - min.: 6,00 mm straightening roll diameter: 180 mm straight. speed ca.: 10-16-20 m/ min bending speed: 10 m/min total power requirement: 75 kW weight of the machine ca.: 46 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.