Biesse Italy, Rover 22 CNC Machining Center Built in 2001 SN 07498 Workspace 4 axes X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vaccum suction holder 4 pneumatic bakelite rods for lifting the plate Vertical electric spindle 7.5 kW with automatic tool change, ISO 30 cone Automatic tool change 7 positions on the working head Drill head with 20 spindles arranged as follows: 7 vertical in X-axis 7 permeable to Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Groove saw 120mm Safety tread mats 110 m3 / h vacuum pump CE marked Weight 3500 Kg Technical information subject to reservation

SPECIFICATIONS: Machining center with grid table Working range X mm: 4300 Working range Y mm: 2200 Working range Z mm: 170 Milling unit - Electrospindle HSK F63, KW 13.2 Drill head type BH10 vertical/horizontal 2 vacuum pumps, each 250 m3 Automatic loading and unloading system Scissor lift Length unloading carpet mm: 4.940 Automatic unloading Automatic lubrication system Additional workstation for displaying and printing labels Revolver tool magazine with 16 positions

I sell a 4-axis CNC machining center Biesse Rover 24L with truss table Year of construction 2004. Configuration: 4-axis main spindle HSD freshly fully repaired / Water-cooled RS1600 Tool magazine 7 positions ISO30 on the head 1x groove saw X-direction Drill head 14+4+2 drilling spindle Usable work surface 4500x1330mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Combined power 35kW XDNC 2.01 software with operating instructions. Pump Becker 250/300 m3/h. 5,5KW Additional vacuum for stencil work or additional clamping devices. Good condition. Available from stock. Need for repair: handles on the truss table, Rotazion from ISO30 magazine on t ...

Processing Manufacturer: Biesse Model: Rover 335 ATC Working range: approx. 3200mm x 950 mm Drilling spindles vertical: 24 pcs. Drilling spindles horizontal: 10 pcs. Milling unit: 7.5 KW  ...

• more information

SECOND-HAND CNC WORKING CENTER 4 AXIS BIESSE MOD. ROVER 24 S 6.5 - Working dimensions: X = 3000mm ; Y = 1350mm ; Z = 155mm - Tool changer 9 slots - ISO 30 - Drilling head 16 spindles - Saw blade group - Axe C - Vacuum pump Becker 100 mc/h - N. 6 working consoles - 7.5 bars - CE (year 2001)

Rover Machining center biesse rover c6.50 very good condition about 6000 h, one 4 axis spindle, 1 3 axis spindle, drilling block biesse works software Machine visible in operation ...

• more information

NESTING MACHINE IN EXCELLENT CONDITION WITH AUTOMATIC LABEL PRINTING AND AUTOMATIC LOADER/UNLOADER, 3 AXIS ...

• more information

Equipped with tool carousel with 10 positions and 8 various milling heads, vacuum table, 2x Büsch type RA 0305 D 503 ZZZZ vacuum pump. Including flexible suction hoses, walk-in protection. Please note! The buyer is responsible for the dismantling and loading, after dismantling the threaded rods must be ground down and any electrics must be insulated. Dismantling and preparing for transport on Tuesday 30 April from 09.00-16.00 hrs, loading on Wednesday 1 May 2024 09.00-15.00 hrs.

Code: 0218 Brand: BIESSE Model: ROVER 18 - CE Standard CNC working center with 3 controlled axis - CE Standard Technical data: Working range X axis mm 2310 mm - Y axis mm 710 - stroke Z axis mm 90 N ° 6 worktables Boring unit composed of n° 12 vertical spindles - n° 4 horizontal spindles - Motor power Hp 2,3 Router HSD Hp 5 - Max speed 24.000 rpm Bevel gearbox unit Vacuum pump 40 m3/hour Working pressure 6 bar Installed electric power 10 Kw Suction port diameter mm 200 Numerical control CNI NC481: Monitor 9 " Multiscreen: a special softkey is constantly enabled to allow the passage of the AUTOMATIC or MANUAL operating environment, to the PUBLISHING environment for ...

Machining center Biesse Rover B 4.50 The machine is in very good condition and is regularly serviced. Biesse Works software Remote control for manual control Automatic tool change system with 12 positions - located on the working head Working area in the X axis 4600 mm The working area in the Y axis is 1342 mm