AIR PELLETIZER FOR PVC AND COMPOUNDS for throughput 500 to 1500 kg/h connection flange built on Clients design made in steel heated by ceramic heaters, temperature probe and protection carter, stainless steel granulation chamber on horizontal axix, quick opening, knife-holder with fluctuating star to reduce knives consumption., self adjusting knives to nozzle by means of a spring which keeps knives pressed, with less wearing out and increased efficiency n.1x 3 kw motorwith extra strong bearing and long shaft, cutting die in anti-wear steel with number and Ø of holes bespoke to project. 1,5 kw blower, Venturi system, knife template, electric cabinet and touch screen control board with modem  ...

PELLETIZERS WATER RING, Constructed with first quality materials and components they are reliable accessories to your extrusion line, compact and economic., made in sturdy stainless steel, With self adjusting knives to nozzle, with less wearing out and incresed efficiency, re-circulating water pump with water filtering unit for re-use, Heat exchanging unit included. You can connect it with your factory chilling unit., electric cabinet with Siemens touch screen for setting all parameters, Modem for remote assistance, Suitable for a variety of plastics and masterbatches., Size bespoke to your project : 100 to 3.000 kg/h, Materials : LDPE HDPE LLDPE PP PS PC ABS, CAPACITY: 100-3.000 KG.

The most cost effective solution for extruders up to 3.000 kg/h., Very compact shape, less metal to heat up., High resistance to pressures line (up to 350 bar)., Minimum material waste due to the continuous cotamination removal., Adjustable speed of the discharge screw allows the finest handling. Continuous cleaning allows to use filters longer than traditional technologies., Pressure is kept constant all the time for a more even process, Easy maintenance: filter replacement easier and faster, without removing machine’s components. Also available with an automatic opening system that makes opening and closing lid’s operations easier, faster and safer., Double screening system : 2 x Ø 37 ...

The most cost effective solution for extruders up to 2.000 kg/h (over 2.000 kg/h, see our item [SBG800](https://www.germanplast.eu/listings/5070212-italian-fully-aut omatic-screenchanger-doctor-blade-system)), You can afford one now to improve your material quality and (your workers job), Available in Ø 400-500-600-700 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Laser and punched screens withstand wear and high temperatures.They can be cleaned in a pyrolytic oven to be re-used several times., Counter-flow cleaning system, suitable for light co ...

CONVEYOR BELTS, with METAL DETECTORS or OVERBELT METAL SEPARATORS, top quality and sustainable prices, Size and characteristics bespoke to the project., Ask for more information ...

• more information

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power : 3

TRIA GRANULATOR XT 100-80, (machine offered totally reconditioned - photos taken before reconditioning was completed), - Granulating chamber mm.1.040800 (40,9431,50”), - 110 kw drive, - New rotor, diam 620 mm (24,41”) 1.000 mm.wide (40), - N.5 Rotor knifes, - N.2 Fixed knifes, - Electrical hopper opening, - Blower and cyclone Included, - new electric panel, - rotor bearings, motor bearings replaced, - 12 mm dima. screen (or bespoke), - constructed in 2004, - see how we recondition at [Germanplasts](https://www.youtube/watch?v=BCW07AKu-F8), Power: 110 kw, width: 1.000 mm.(40), Knives: 5 R+2S

Constructed according to the high Italian quality standards, Made in sturdy carbon steel welded structure Flat bottom with horizontal screw and doctor blade, or conical bottom with diagonal screw (depending on project requirements) plexiglass inspection window, Electric motor bespoke to project material and size paddle type minimum level indicator Bolted inspection door, Safety devices, CE compliance, drawings, user manual, Can be integrated with our [DRYING SYSTEM](https://www.germanplast.eu/listings/4115725-drying-system-for- vertical-mixers)

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveyi ...

DREHER HEAVY DUTY GRANULATOR, (photos taken before reconditioning), One machine from heavy scraps to regrind, S 60-65 SRV GF, Infeed 650 x 600 mm., solid rotor 650 mm wide 600 mm Ø, n.8 rotating knives, n.3 still knives, throughout rate 500-1.500 kg/h depending on screen, 75 kw drive, NEW electric panel, screen : bespoke to project, Machine totally reconditioned, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), possible addition of blower, pipes, etc., Total dimensions: LxWxH 1,36 x 2,8 (3,3 open) x 3.64, This is a hevy duty granulator especiallly constructed, for the efficient granulation of thick walled plastic parts such as, lumps, chunks, plates, pipes. One ...