We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,436 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Plate punch Beil 780 S-H-APL-CTP-p; pneumatically; Punching 780mm Autoplate; puncture 11mm; suitable for MAN 700; compressed air required. Plate punch Beil 780 S-H-APL-CTP-p MAN 700; pneumatic; punch size 780mm autoplate; depht 11mm; used for MAN 700; Need pneumatic air.
used
Printing plate punch Beil 425 stand model; good condition; Punching 425mm round; with adjustable ring visor bolts; Foot pedal; Max. Plate width 97cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
XL wide printing plate punch ( 165 cm ) for Roland and KBA presses. 4 punching modules are installed, 425 mm and 780 mm. Additional recesses and fastenings are provided for a total of 120 cm, so that a larger format can be processed; Very good, ready to use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
Reference Num.: 3657 Brand: Beil Type: 780/425-S-H-AP Construction year: 1999 Available: directly Status: In production Location: Deutschland
used
Printing plate punch hatchet; good condition; Max. Plate width 205cm; Perforation 1200/780/425mm Autoplate; 1200 and 425mm can be parked. Plate punch hatchet; good condition; max.plate width 205cm; punch 1200/780/425mm autoplate; 1200 and 425mm can be suppressible.
used
Description Plate die-cutter suitable for MAN Roland 300-500-700-900 with autoplate system APL and Graphometronic Film register for plates from CtP systems but also for presses from Heidelberg 52, 74, 102 and XL series and KBA Rapida presses 74, 75, 105, 130, perforations 780 and 425 mm can be switched off each
used
max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 74 cm stamp width: 340 mm serial no.: 13434 dimensions of press (L x W x H): 80 x 95 x 120 cm weight: 100 kg Thermo plate bender for The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
choice of plate punches : Size 35x50: 1 Beil 425 x8 H AP + Plate bender Beil PBS S 52 HB Year 2009: 1.700 euro both 2 Bacher model 2032- 300 euro each – 500 euro both 2 Special BKR model 425 400 euro each- 700 euro both 2 Heidelberg model A1.090.9016- 500 euro each- 900 euro both Size 50x70- 70x100 : 1 Bacher model 2045- 750 euro 1 Bacher model 2031- 800 euro 1 Heidelberg SM/CD Plate punch- 2.200 euro 2 Super KLS -1000 euro each – 1700 euro both 1 Bacher Control model 2000- 1.000 euro 1 OMT 70x100- 800 euro 1 Bacher Control system model 2002- 1.000 euro 1 Bacher Control model 2042- 1.000 euro All the photos and detailled punching diagram/photo for each plate punch All available immediately in our stock
used
used
used
used
used
used
used
Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates.
used
Snow slingshot Beilhack HS 231 Z, PTO drive 540 rpm.(in driving left, left), heavy design with mounting plate and hydraulic lifting, 360° hydraulically swivelling ejection fireplace, height-adjustable sliding skids. Clearance width 2.30 m, clearing height approx. 1.20 m, throwing distance up to approx. 12 m. Condition good, hydraulic hoses as good as new. other smaller snow blowers as well as snow clearing shields in stock - see photos.
used
used
used
Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.
used
used
Description with exact angle system cutting width 50cm
used
used
Stanze PAGUS Stanze punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm
used
Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 punching brackets, punching unit Year of construction approx. 1990 Projection: 160 mm Punching capacity: 0.3 to 5 mm Material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Built-in is a round hole tool ø 5 mm Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brakeDimensions of punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition; used
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket projection 210 mm with punching tool -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA, punching bracket GN4 type PA80 400 with punching tool -Throat: 400 mm -Punching capacity: mm -Matrix: Ø 75 mm -Dimensions: 570/120/H140 mm -Weight: 27.6 kg
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg
used
Punching machine (heavy duty) De Groot Model Punching Year 1980 Width 600 mm Available Direct
used
Producer: Baust Werkzeugtechnik Complete production line for rotary punching of sheet metal or plastic. Rotary die cutting machine / Rotary punching machine Including de-coiler and un-coiler. Year of production: 1999. Coilers equiped with Lenze 5.5 [kW] motors. Sheet processor drive power 4.6 [kW]. Material thickness range: 0.4 - 1.5 [mm]. Material Yield strenght: 350 [N/pmm]. Equiped with Lenze motors and drives and Siemens SPS S7 control. Power: 3 x 400 [V] 5%. Frequency: 50 [Hz]. Control voltage: 24 [V]. max. Fuse: 63 [A]. Working modes manual or automatic. Including complete original operating instructions in German and schematics. On stock ready for delivery, including packing and loading. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.
used
GBC Magna Punch Pro Heavy Duty Electric Desktop Punch Multifunction Punch Working Width 400mm 220V with Renz Binder PBS 340
R22104/17 AMC Label Punch Model: NC 110 LCD Built: 1998 Availability: instantly Punching surface 750 x 1100 mm Punch size: max. 280 x 280 mm Min. 10 x 10 mm max. punching pressure 10,000 kg Stacking height 0-25 mm Available: immediately
refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately
used
Miterstanze
in 2005 refurbished Still in operation: Yes Available: immediately
<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately
<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately
used
Sample punch for specimen DIN 527-2 mm. suitable for elastomers, paper, cardboard and foil. NEW.
<br><br><br>Still in operation: Yes<br>Available: immediately
<br><br><br>Still in operation: Yes<br>Available: immediately
used
Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used
used
Punch Pfaeffle F 42 Y.O.M. 1972;for punching binding perforation for spiral, wire comb, plastic binding, stitching systems, register inserts; Format range max.320x320mm; Format range min.148x100mm; Punchstaerke max.2mm; Tools interchangeable; Simple conversion of formats; with tool oval hole 4x3/ 5mm pitch; in 01/2012 by Pfaeffle. Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
in 2005 general overhauled Still in operation: Yes Available: sofort
overhauled in 2007 spare parts Still in operation: Yes Available: sofort
used
Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request
used
Standard equipment; Ready
used
used
Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t
used
Labeling Division m/m lettering / Stamped no. Slope 25 1:3 4x3 9006 4.3.74 41a 7 8x8x8x8 40 6 3 401 5 m/m 44 3:1 3x4 1235 51 3:1 4x4 Viereckloch / Nr. 38449 42 2x8 Kunststoffkamm / USA 41 2x7 Kunststoffkamm 20 3:1 3.5x4.5