bbt used for sale

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: BBT Presses, single column eccentric press type ER 25 with safety cage -Press guard: Nilson -Clutch: pneumatic -Pressure capacity: 25 tons -Stroke rate: 50/100 strokes/min -Stroke: adjustable 12 - 80 mm -Table size: 520 x 360 mm -Projection: 190 mm -Punching fixture: Ø 30 mm -Insert height: 310 mm -Central lubrication -Dimensions: 1180/800/H1820 mm -Weight: 1418 kg

pressure: 15 t throat: 160 mm stroke: 6 - 60 mm ram adjustment: 60 mm no. of strokes: 120 Hub/min table height adjustment: 150 mm table surface area: 500 x 350 mm ram hole: 30 mm total power requirement: kW weight of the machine ca.: 850 kg dimensions of the machine ca.: 0,75 x 0,85 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number: 0661202/0532203 Coil weight: max. 1000 kg Nominal belt width: 300 mm Outer coil diameter: max. 1200 mm Inner spreading range: 460 - 530 mm Coiler drive: 1.5 kW Belt thickness: min. 0.8 / max. 3.0 mm Draw roller diameter: 90 mm Straightening roller diameter: 60 mm Straightener drive: 3.0 kW With digital SIEMENS SIMATIC HMI control Approx. Onsite Dimension. (l x w x h): 3,250 x 1,300 x 2,700 mm, weight approx.: 1,500 kg

Brewhouse Tank Farm from 15hl / brew Craft Brewery Complete tank farm / cold block from the 15hl/brew craft brewery, made by Estonian Torsteel in years 2014 – 2016. Tanks are made of AISI 304 and they are insulated pressure tanks. All CCTs have two cooling zones on both sides of the tanks and one cooling zone in cone, BBT has two cooling circuits on side and yeast tank cooling zone is on side of the tank. Tanks are equipped with pressure safety valves, CIP bowl, zone specific temperature sensors, manholes, sampling taps, filling and emptying valves. Tank temperatures is automatically controlled from common control panels. The following tanks are available - CCT 14 x 3000 liters net, working pressure 1.5 - 3.0 bar - CCT 2 x 1500 liters net, working pressure 3 bars - BBT 1 x 3000 liters net, working pressure 1.5 bars - Yeast tank 1 x 300 liters,

Tecnimodern TEC 130 BBTA Flowpack Tecnimodern horizontal bagging machine year 2005 In working order spare parts required

mobile chipping machine incl. timber loading crane (Epsilon Q 170 Z 96) - Built on 3-axle semi-trailers with road approval - Fifth-wheel coupling - two-line air brake with ABS, hyd lowerable jockey wheel for independent transfer on paved surfaces further detailed data in the exposé

Overview This brewing facility, with equipment from 2018 - 2020, is becoming available as brewing operations will cease in the summer. The machines are still in operation and will be available from 01.05.2024. This offer consists of a malt mill (Maltman), brewhouse (Speidel), fermentation and storage tanks (Speidel), a bottle filler (Rizzolio) with labeling (ENOS) as well as accessories for the operation of the brewery. Scope Brew house | Braumeister | 500l | 2019 3x Pressure Tank | Speidel BBT | 1.2 bar 625l | 2018 – 2020 1x Pressure Tank | Speidel BBT | 2.5 bar 625l | 2021 4x Fermentation and storage tanks | Speidel BBT | 625l | 2018 Counter pressure filler | Rizzolio | RLV 4-4-2 | 2019 Cooler with 100l buffer tank and automation | Energytech/ Onnline | 2019 Labeller | Enos Euro | Compatta | 2020 Mill | Maltman | MM-150SP | 2018 Density meter | Anton Paar | DMA35 | 2019 Plate heat ex ...

Qty. 1 Second-hand pub brewery Mfc.: EcoBrewtech Capacity: 15 hl Built: 1996 Consist of: 2 Vessel Brewhouse 3 x 15 HL fermenting tanks (w/ cooling jacket) 4 x 15 HL BBT (w/ cooling jacket) 4 x 15 HL BBT (PED) 1 water tanks 20 HL Steam generator (NEW): 106.4 kWn, 150 kg/h Steam, 5 bar ITWS (NEW): 25800 kcal Malt handling

x-travel:510 mm y-travel:400 mm z-travel:350 mm table-size:600x400 mm spindle speeds:12000 (Motorspindel) 1/min. spindle drive:5,8 kw spindle taper:30 BBT oder SK rapid traverse in x-y-z axis:60 m/min Tool changer:16 fach weight of the machine ca.:2,8 t CNC controller:SIEMENS 828D (10.4" LCD+SHOPMILL) high speed directl spindle motor:12000 1/min inner coolant:20 bar chip conveyor - auger:im Bett Brandnew machine with: 1. CONTROL SYSTEM SIEMENS 828D (10.4" LCD+SHOPMILL) 2. WORKING TABLE SIZE: 600 X 400 MM 3. MAX. TABLE LOAD CAPACITY: 250 KGS 4. SPINDLE SPEED 12.000RPM (DIRECT DRIVEN TYP) 5. SPINDLE MOTOR 5.8 KW (1PH8087) 6. SPINDLE NOSE BBT 30 7. X/Y/Z STROKE 510/400/300 MM 8. X/Y/Z STROKE RAPID TRAVERSE: 60/60/60 M/MIN 9. ATC CAPACITY 16 TOOLS (DISC TYPE) 10. STANDARD SPLASH GUARD 11. ELECTRICAL CABINET WITH HEAT EXCHANGER 12. COOLANT UNIT 13. MANUAL PULSE GENERATOR 14. RIDGID TAPPING  ...

Vertical machining center Victor Taichung P136 Fanuc Make: Victor Taichung Model: P136 CNC: Fanuc X-AXIS TRAVEL 1360 mm Y-AXIS TRAVEL 700 mm Z-AXIS TRAVEL 700 mm DISTANCE SPINDLE NOSE-TABLE 100-800 mm DISTANCE COLUMN-SPINDLE AXIS 792 mm RAPID FEEDS X-Y-Z 32 – 32 – 32 m/min SPINDLE 15000 rpm; 11-15 kW; BBT-40 TABLE SIZE 1400 x 700 mm MAX ADMITTED LOAD 1000 Kg HIGH PRESSURE COOLANT 20 Bar TOOL MAGAZINE CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER 75 (150) mm MAX TOOL LENGHT 300 mm MAX TOOL WEIGHT 7 Kg CONTROL UNIT FANUC 0i-MF WEIGHT 9500 Kg OVERALL DIMENSIONS 4670 x 2985 x 3105 mm ACCESSORIES SWARF CONVEYOR ; PORTABLE HANDWHEEL

Vertical machining center KOMATECH KT420L Fanuc Make: KOMATECH Model: KT420L CNC: Fanuc X-AXIS TRAVEL 700 mm Y-AXIS TRAVEL 420 mm Z-AXIS TRAVEL 300 mm DISTANCE SPINDLE NOSE-TABLE 170-470 mm RAPID FEEDS X-Y-Z 50 – 50 – 60 m/min SPINDLE 24000 rpm; 3,5-22,6 kW; BBT-30 TABLE SIZE 800 x 400 mm MAX ADMITTED LOAD 300 Kg TOOL MAGAZINE TURRET TYPE ; 21 POS MAX TOOL DIAMETER 80 mm MAX TOOL LENGHT 200 mm MAX TOOL WEIGHT 3 Kg TOOL EXCHANGE TIME CHIP-TO-CHIP 1,36 s CONTROL UNIT FANUC 0i-MF WEIGHT 2300 Kg OVERALL DIMENSIONS 2520 x 2065 x 2655 mm

Vertical machining center KOMATECH KT360D Fanuc Make: KOMATECH Model: KT360D CNC: Fanuc X-AXIS TRAVEL 520 mm Y-AXIS TRAVEL 360 mm Z-AXIS TRAVEL 300 mm RAPID FEEDS X-Y-Z 50 m/min SPINDLE 24000 rpm; 2,2-20 kW; BBT-30 TABLE SIZE 650 x 900 mm MAX ADMITTED LOAD 200 Kg HIGH PRESSURE COOLANT 20 Bar TOOL MAGAZINE TURRET TYPE ; 21 POS MAX TOOL DIAMETER 80 mm MAX TOOL LENGHT 200 mm MAX TOOL WEIGHT 3 Kg TOOL EXCHANGE TIME CHIP-TO-CHIP 1,36 s CONTROL UNIT FANUC 0i-MF WEIGHT 4300 Kg OVERALL DIMENSIONS 3150 x 1760 x 2715 mm

Vertical machining center Victor Taichung AX630 5-axis Fanuc OIMF Make: Victor Taichung Model: AX630 X-AXIS TRAVEL 700 mm Y-AXIS TRAVEL 500 mm Z-AXIS TRAVEL 500 mm DISTANCE SPINDLE NOSE-TABLE 100-600 mm DISTANCE COLUMN-SPINDLE AXIS 300 mm RAPID FEEDS X-Y-Z 48 – 48 – 48 m/min SPINDLE 12000 rpm; 11-15 kW; BBT-40 B-AXIS -30° + 110 ° C-AXIS 360 ° TABLE DIAMETER diam. 630 x 500 mm MAX ADMITTED LOAD 300 Kg TOOL MAGAZINE CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER 76 (125) mm MAX TOOL LENGHT 300 mm MAX TOOL WEIGHT 7 Kg TOOL EXCHANGE TIME CHIP-TO-CHIP 5,3 s CONTROL UNIT FANUC 0i-MF WEIGHT 9000 Kg OVERALL DIMENSIONS 3580 x 4475 x 3040 mm

HARTFORD LG1000 LG1000 F1 series TABLE Working area mm 1150x510 Table with T-slots mm 18x3x160 Table capacity kg 700 SHIFTS AXIS X mm 1000 Y AXIS mm 510 AXIS Z mm 630 Spindle axis distance to table surface mm 100 ~ 730 Distance of the table axis tip from the column mm 562.5 POSITIONING ACCURACY Positioning accuracy (JIS B6338) mm ± 0.008 Repeatability (JIS B6338) mm ± 0.002 FEEDS Working feed m / min 12 Rapid traverse X / Y / Z m / min 30/30/24 (optional 40/40/32) SPINDLE # 40BT Spindle Nose Spindle speed (belt gear) rpm 8000 (opt. 10000/12000) Spindle speed (DDS) rpm 10000 (opt. 12000/15000) Spindle drive (30 min) 11 kW, belt drive AUTOMATIC TOOL CHANGER Tool magazine capacity A: 24 (opt S: 20) Max. tool weight kg 7 Max. tool dimensions (diameter x length) mm ø75 x 300L (option S: ø90 x 250L) Type of hand ...

Brewery Ziemann 400 HL / brew – max. 12 brews/day Brewhouse made by Ziemann in year 2000, 400 hl/brew, with a mash filter, made by Meura in year 2000. It is almost complete brewery, which can produce various type of beers at 700’000 hl / annum. Brewery has also one returnable glass bottle (24’000 bph) and one can filling line (30’000 cph) which will be sold separately. Brewery equipment is in good condition, not dismantled, still on power. The brewhouse is controlled by Braumat control system. Most of the PLC controls is made with Siemens Simatic S7 series with central control via Ethernet. Installed mash filter Meura improves the performance of brewing process (compare to filter tank) and allows the use in the production low quality (dusty) malt and the filtration speed and quality do not change. The main technical characteristics of this brewery: Year of manufacturi ...

Inv. Num. : 6778 Type: F 960 M Producer: HYUNDAI WIA Created: 2014 Parameters: Control system: SIEMENS Working table length: 2700 mm Working table width: 950 mm Maximum table load (uniform): 4500 kg Spindle drive power: 22 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 2450 mm Y-axis travel: 960 mm Z-axis travel: 850 mm Cone: BBT 50 Number of all tools: 20 pieces Rapid traverse X/Y/Z: 16/16/20 m/min Machine weight: 23500 kg

Description: Machine number: 12965 Printing capacity: 250000 kg Feed size: 300 x 5 mm Belt infeed height (with plate): 125 - 315 mm Additional device: 2-hand operation Projection: 450 mm Installation height center dimension (without plate): 350 mm Clamping plate thickness: 110 mm Trunnion Ø: 65 mm Plunger strokes: 35 min. Adjustable ram: 80 mm Stroke adjustable: 20 - 140 mm Motor power: 20 HP Voltage: 380 V Lower table top dimensions: approx. 1200 x 850 mm Upper table top dimensions: approx. 750 x 330 mm With electronic roller feed: Dreher WAV-RDS-2E 1160B, serial no. 940059, year of manufacture 1994, feed 300 x 3 mm With reel straightening machine combination: BBT ABH 1100 / BRM 300, year of manufacture 2019, feed 300 x 3 mm With minimum quantity lubrication: Schmidt weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,210 x 3,000 mm

x-travel:1300 mm y-travel:1900 mm z-travel:800 mm distance spindle nose and table:180~980 mm distance between columns:1840 mm table-size:1650x1300 mm table load:4 t T-slot (width-distance-quantity):22x180x7 mm spindle cone:50 BBT spindle speed:10000 1/min spindle drive:15/18,5 kW Spindle motor torque:526 NM rapid traverse in x-y-z axis:20/20/15 m/min feeds:1~10000 mm/min Tool changer:24 -fach workpiece length:350 mm tool diameter:110/220 mm weight of tools max.:15 kg positioning accuracy:0,020|0,025|0,03 mm repeating accuracy:0,015|0,020|0,025 mm total power requirement:60 kva machine length:4900 mm machine width/height:4160×4339 mm Weight approx.:18 t automatic tool changer:24 fach :Gewindebohren ohne Ausgleichsfutter CNC controller:Heidenhain/Siemens/Fanuc gear box:von Barufaldi/Italien CE-design:gegen Mehrpeis möglich (TUEV) inner coolant:30 bar chip conveyor - auger:im Maschinenbet ...

x-travel:1020 mm y-travel:510 mm z-travel:600 mm table-size:1070x510 mm T-slots:18x5 (Breite x Anz.) mm max. table load:500 kg distance spindle center to table:100-700 mm rapid traverse in x-y-z axis:36/36/36 mm milling feed range:1-12.000 mm/min spindle speed:15.000 (direkt) 1/min spindle taper:40 BBT oder SK spindle drive:14.6 kw Tool changer:30 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dimensions:2780x2500x2810 mm weight of the machine ca.:7,1 t CNC controller:SIEMENS 828D (10.4" LCD+SHOPMILL) oder FANUC coolant system:mit 320l Tank automatic tool changer:30 fach Tool setter:Option inner coolant:20 bar mit Filtersystem chip conveyor - auger:im Maschinenbett Factory-new, immediately available, vertical CNC machining center with CNC control MANUAL GUIDE i FUNCTION + 10.4 "LCD MONITOR. Our Taiwanese supplier is the largest manufacturer in T ...

x-travel:760 mm y-travel:820 mm z-travel:560 mm rotary table tiltable:A-Achse +30 ~ -120°, C-Achse: 360°, Min. Index-Inkrement 0.001° table-size:630 mm distance floor area / table surface:900 mm table load:600 kg Workpiece dimensions:max.Ø800x500 mm spindle speeds:20000 1/min. spindle drive:40 kw spindle taper:40 BBT milling feed range:1-10000 mm/min rapid traverse in x-y-z axis:48 m/min rapid traverse speed:Tisch (A-/C-Achse): 83/125 mm/min Tool changer:30 fach max. tool length:125 mm max. tool weight:8 kg max. tool diameter:80 mm Machine size (LxWxH):2200x4000x3415 mm high speed directl spindle motor:20000 1/min CNC controller:Heidenhain iTNC-530 Full 5 axis chip conveyor - auger:im Bett :Marposs mida laser 75P Tool setter:Marposs mida laser 75P Scales:X/Y/Z Achse von Heidenhain Factory new, immediately available CNC 5-axis universal machining center with CNC control HEIDENHAIN TN ...

x-travel:820 mm y-travel:510 mm z-travel:535 mm table-size:900 X 510 mm T-slots:18x5 (Breite x Anz.) mm max. table load:500 kg distance spindle center to table:100-635 mm rapid traverse in x-y-z axis:48/48/36 mm milling feed range:1-12.000 mm/min spindle speed:15.000 (direkt) 1/min spindle taper:40 BBT oder SK spindle drive:14,6 kw positioning accuracy:0,005 mm repeating accuracy:0,003 mm Tool changer:30 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dimensions:2,200 × 2,692 × 2,745 mm weight of the machine ca.:5 t CNC controller:SIEMENS 828D (10.4" LCD+SHOPMILL) oder FANUC automatic tool changer:30 fach coolant system:mit 320l Tank Tool setter:Option inner coolant:20 bar mit Filtersystem chip conveyor - auger:im Maschinenbett Factory-new, immediately available, vertical CNC machining center with CNC control MANUAL GUIDE i FUNCTION + 10.4 "LCD ...

x-travel:510 mm y-travel:510 mm z-travel:510 mm :550 x H 800 mm B-axis (table):0.001 Grad table-size:400 mm table load:400 kg spindle drive:22 kW spindle nose:40 BBT spindle speeds:15000 1/min number of tools:60 tool diameter:150 mm tool length - max.:410 mm weight of tools max.:8 kg milling feeds:1-20.000 mm/min rapid speed:60 m/min Machine size (LxWxH):1750x5060x2720 mm weight of the machine ca.:9 t inner coolant:70 bar 3 chip conveyor:2 fach automatic tool changer:60 fach Automatic Pallet :2 Stück :von LHL Brand new horizontal machining center with: CONTAINS: 1. Control system Fanuc Oi-MF (10.4" Screen) 2. Working table size: 400 x 400 mm 3. Max. workpiece dimension: DIA. 550 x H 800 mm 4. Max. table load capacity: 400 kgs each pallet 5. Spindle center to table surface: 80 ~ 590 mm 6. Table center to spindle nose: 70 ~ 580 mm 7. X/Y/Z Stroke 510/510/510 mm 8. X/Y/Z Stroke rapid tra ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftCabineFull protection cabinSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)Rigid table with integrated rotary axis (leftside)Rigid table with integrated round table Ø 1050 mm // 41.3 in located left side of table table load max. 1,200 kg  ...

Control Fanuc ... 31i - B5 Clamping table surface ... 850x410mm Axis X ... 700mm Axis Y ... 400mm Axis Z ... 330mm Spindle speed ... 0-24000/min. controlled axes ... 5 cooling ... 35bar Spindle mounting... BBT30. Rapid traverse ... 54m/min Main engine power ... 4.7/14.2kW Max. table load ... 300kg L x W x H ... 2100x2165x2800mm Machine weight ... 2300kg Magazine slots ... 21 + Robot FANUC LR Mate 200iD The machine is in good condition, possible to test under electricity.

Adapter for tool presetters The adapter is plugged into the SK50 basic holder of the tool presetter and thus serves as an intermediate module for Tool holders with size SK30 or BBT30. The adapter is calibrated and equipped with calibration balls.

This Hyundai Wia KF 5600C Vertical Machining center was manufactured in the year 2017 in Korea and has 1800 production hours. It is equipped with a HYUNDAI WIA Fanuc Series 0i control unit. The machine has a spindle speed of 12000 rpm and operates with tool holder BBT40.