Press force at the end of stroke: 2000 t Slide stroke: 200 mm Number of slide strokes per minute: 17 Adjustment of interstamping space: 15 mm Max. distance between table and slide in its lower position: 830 mm Distance between guides in daylight: 1040 mm Bolster plate dimensions: -From front - to back: 1300 mm -From right - to left: 1270 mm Size of the opening in the table - diameter: 130 mm Slide dimensions: -From front - to back: 800 mm -From right - to left: 1250 mm Main electric motor: -Type: АС 82-4 -Power: 55 kW -RPM: 1380 Electric motor of adjustment: -Type: АО 52-6 -Power: 4,5 kW -RPM: 950 Press weight: 75107 kg

ressure: 800 tons Number of strokes per minute: 45 Slide stroke: 160 mm Adjustment of rod length: 15 mm Closed height: 630 mm Table size: 860х860 mm Max. distance between table and slide in its lower position: 630 mm Distance between guides: 670 mm Height of a table above floor: 700 mm Main motor power: 28 kW Press dimensions: -Left-to-right: 2290 mm -Front-to-back: 2800 mm -Height: 4910 mm Press weight: 31,8 tons

Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR

Maximum force: 2000 tons Slider stroke length: 500 mm Number of courses of a slider per minute: 6 Number of single turn-on: 3.6 The closed height: 1160 mm Adjustment: 220 mm Table size: -From left to right: 2000 mm -From front to rear: 2500 mm -Thickness die plate: 300 mm Slider overall dimensions: 1600x2000 mm Aperture in a table: 1250x1250 mm window dimensions in cheeks: 1600x1000 mm Maximum Die Weight: 6000kg Hydropneumatic cushion in the table: ·working stroke 250mm ·maximum clamping force 350 ton-force ·maximum push force 20 ton-force Main electric motor power: 125 kW Press overall dimensions: 5390x4870x8860mm Press weight: 228.990 tons

Effort 2000t moving matrix 280 mm landing pad 570 mm landing slider after closing the matrices 390 mm Number of moves of the ram, stroke / min 25 Electric motor power 160 kW Dimensions, mm: LWH = 856053604850, the level above the floor is 3200. Weight of the car without electricity: 239.8 tons. Weight of the bed: Front part: 82 tons. Rear part: 55t. Weight 270 ton

General SKUR0068 LocationBarneveld MakeDewaco Ltd (FI) TypeFPD-16 Belt Filter Press No.01-965 Year of construction2010 Main Features MaterialStainless steel Motor0.75 KW Width1600 mm Specified Features - Sieve belt press Motor0,75 kW 220-240/380-420 Volt and 0,37kW 220-240/380-420 Volt Band speedvariabel Belt width1600mm With fluid reservoircheck MaterialStainless steel Information With switchon the gearbox Weight3400 KG CEcheck Floorspace3,5x2,4 M Total height2,6 MSieve belt pressesDEWAFilters > Sieve belt pressesBrand > DEWA What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinatio ...

Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.

BTS-Bag Press With the BTS-Bag Press for waste bags large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing the waste volume up to 90%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created. - Compaction up to 90% - Reduces frequency of waste collection - Useable for wet and dry waste - Optimum utilization of waste container - Reduces the number of waste containers - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 3 Ton Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine s ...

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,  ...

• more information

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System  ...

• more information