bad salzungen used for sale

material width:250 mm material thickness:0,2 - 2,0 mm no. of straightening rolls:7 straightening roll diameter:60 mm run-in height:1250 mm power capacity:4,0 kW weight:0,65 t Dimensions (WxDxH):1,05 x 1,25 x 1,5 m

material width: 250 mm material thickness: 2 - 4 mm no. of straightening rolls: 7 run-in height: 1250 mm mm strip intake tiltable, positiv: 25 ° strip intake tiltable, negativ: 30 ° total power requirement: 3 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 250 mm coil outside dia.: 1400 mm weight max. in kg: 2500 kg plate thickness: 2 ... 4 mm straightening feed: 2,5 ... 15 m/min coiler: expanding range: mm total power requirement: 1 + 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire diameter: 0 mm Speed: 0 rpm Number of rolls: 0   Make  UPW 12.5 Type Bad Duben Year 1985 Pressure = 12.5 Ton Work piece = 10 - 70 mm Threading length = 125 - 2000 Pitch lead 50 ?Optional 160 sets tooling

sheet width: 250 mm coil weight: 2,5 t coil internal dia.: 450 - 530 mm sheet thickness - max.: 4 mm coil outside dia.: 1400 mm total power requirement: kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UPW 25x100 Thread rolling machine Available 2 machines. Pressure 25TONS Max. Workpiece Diameter 100mm Min. Workpiece Diameter 10mm Thread Length at Plunge Operation 180mm Thread Length at Continuous Operation 2000mm/80mm Distance Of Roll Spindles 150/325mm Length Of Roll Spindle Fixtures 180mm Dia. Of Rolling Tool 230mm Roll Spindle Turning Speed Range 20-90 U/Min Shaft Dia 63mm Weight 3,25 tons

material width: 125 mm material thickness: 2 mm straightening feed: 5 - 30 m/min total power requirement: 1,5 kW weight of the machine ca.: 460 kg swiveling straightening unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 125 mm coil weight: 2x 0,8 t coil internal dia.: 300-500 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: BxTxH 2000x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control cabinet - cooling device, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling device, control cabinet cooler -Manufacturer: bader, control cabinet - cooling device -Type: W 25/8 A -Voltage: 230V -Power consumption: 0.120 kW -Dimensions: 300/80/H750 mm -Weight: 11.0 kg

Antenna cables, extension cables -Manufacturer: Bad Blankenburg -Type: AZ118LL -Length: 4 m -Quantity: 39x cables available -Price: per piece -Minimum order: 3 pieces -Weight: 0.18 kg/piece

pressure: 0,2-40 t max. workpiece diameter: 70 mm threading length: 120 mm Control: total power requirement: 29 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU394U1137 LocationBarneveld MakeBader No.411 Year of construction2002 Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1790 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1790 Ltr. Vessel sizesDia. 1200x1750 mm Dished topcheck Dished bottomcheck Manholecheck DN500 Top connectionsDN100, DN80, DN500 (4x) OutletDN100 Max. temperature-60ºC/+200ºC MaterialStainless steel 1.4404 (316L) Information Mounted on legscheck Floorspace1,20x1,20 m CEcheck Total height2,5 m Weight650 kgPressure vesselsBaderTanks > Pressure vesselsBrand > Bader What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

rolling capacity max.:2-20 t workpiece diameter:100 mm total power requirement:2 x 8,5 kW weight of the machine ca.:11 t dimensions of the machine ca.:7,1 x 5,15 x 3,9 m Description of the manufacturer: The ROLLEX® is more than an innovation offered by Profiroll in the field of Spline Rolling. This flexible machine type enables a rolling of splines onto most different types of shafts. The CNC-control combined with symmetric circular dies allow a manufacturing of splines with highest quality demands. Likewise the ROLLEX® is able to coldform profiles, threads and to perform finishing rolling due to its reliable Profile Rolling process. Circular Die Process circular dies for kinematic rolling with symmetric geometry this correlates to a rolling rack of infinite length a workpiece specific calibration phase achieving least tolerances is the result lowest changeover times due to com ...

From a current recycling we offer you Butzer star screening machine ESS T2. Year of construction 2023 Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 36469 Bad Salzungen The sale is without warranty Subject to prior sale

4 fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -5 stand / 16 bars -Traverse length 2.70 m -Load per level 2.4 tons -Shelf height: 3,00 m deep 1.00 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria / Eisenach (Thuringia) Lahr (Baden Württenberg) Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 200 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultatio ...

8 fields pallet shelf (used) - various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich - 9 stand / 32 bars - traverse length 2.70 m-load per level 2.4 bin shelf height: 3.00 m deep 1.00 1.10 m dismantled / verladefertigArtkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria / Eisenach (Thuringia) Lahr (Baden Württenberg) sale remains vorbehalten___Fracht / LieferungAktuelle without obligation estimated about freight costs for the German Federal territory be 200 euros. for our We can arrange a cheap, reliable carrier who delivers the goods at a price as possible to customers.For the 1:1-we vouch for us passing the dispatch or shipping costs.Self pick-up possible - after Terminabsprache.Lieferzeit 2 WochenVersand in Europe after consultation and confirmation email.Commercial customers from EU countries (Austria, Italy  ...

11 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -Stand 12 / 32 bars -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à la car ...

BySprint Fiber 3 x 1.5 m with 4.0 kW year 11/2016 cutting hours approx. 620 h Location : Baden-Wuerttemberg New price : approx. 600,000 EUR Available immediately Equipment: BySprint Fiber 3015 4,000 W Special position of the control cabinet Automatic duesen changer 40 compartment parts and cross-foerderin in the cutting area Inclusive: Incl. installation incl. system documentation incl. instruction training BySprint Fiber 4 days after commissioning Insurance 6 months manufacturer's service within Germany machine is still in use and can be inspected by arrangement. Excerpt from the then product brochure in the appendix. If you are interested, further pictures can be requested.

23 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -24 stand / 64 traverses -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à l ...

BySprint fiber 3 x 1.5 m with 4.0 kW built 10/2016 Cutting hours approx. 500 h Location: Baden-Württemberg Original price: EUR593.300 Available from about week 32/2017 Facilities: BySprint 3015 fiber 4,000 W Special position of the control cabinet Automatic nozzle changer 40 specialist Parts and cross conveyors in the cutting area Included: Incl. mounting Incl. plant documentation Including induction training BySprint fiber 4 days after commissioning Incl. transportation / insurance 12 months manufacturer warranty within Germany Machine is currently still in use, and can be viewed by appointment. Excerpt from the former product brochure in the annex. If you are interested, more pictures can be requested.

47 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -48 stand / 128 traverses -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à ...

; Mileage [km]: 6; Power [PS]: 270

95 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -96 stand / 256 beams -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à la ca ...

Groninger vial line including labelling comprising ASVG 100 washing machine, container diameter from 16 up to 95 mm, container height from 33 up to 238 mm, capacity up to 3,000 vials per hour, Siemens SIMATIC S7-300, electrics 3x400V/50Hz, electrical power 3.5 kVA, vial infeed via DTE 1000 rotary infeed table (diamteter 1000 mm) under LF-unit, magazin outfeed under mobile LF-unit (The washed vials were collected in magazines and manually put into a dry heat sterilizer for sterilization. After sterilization the vials were transferred to the vial filler. The dry heat sterilizer is not part of our offer), DFVG 4001 intermittent vial filling & stoppering machine with LF-unit, container diameter from 14 up to 68 mm, container height from 30 up to 140 mm, pre & post gassing, 4 filling stations using rotary piston pumps, in-process control for checking the filling volume, Siemens SIMATIC S7-300 ...

P7 - used 2 x 10 m³ / 2 x 10,000 L stainless steel tanks, vertically standing, insulated, heating element inside, on 3 bases, in good condition. Dimensions: diam. outside appr. 2.00 m x height 4.85 m diam. inside appr. 1.80 m x height 4.40 m former glycerin 86% tank The tanks are insulated, have a heating spiral on the inside and stand on 3 bases. The tanks have been cleaned professionally. The containers / stainless steel tanks can be used as storage tanks for many different media. The containers are used, according to the age signs of wear are present. The tanks are located near Baden-Baden, Germany. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already ...

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...

The AMTEC VERTIwrap is a sorting module weight tester. Width 220 mm, weight range 5-999 g e = 1, 5 g. The machine is available and can be viewed like in Meersburg, Baden-Württemberg.

Serialization system for packaging line: suitable for the printing of code data on the cartons. Incl. camera vision system, bad ejection and data management system etc.

Groninger HEA 105 vial labeling machine, 12-pocket starwheel, container diameter from 40 to 68 mm, container height from 20 to 250 mm, label height max. 120 mm, label length min. 30 mm, with Allen NGT2 thermo transfer printer for printing the variable data on the labels with print control, barcode-scanner, reject of bad vials and magazine outfeed of good vials, electrics 230/400V/50Hz, electrical power 7.5 kW, capacity up to 6,000 vials per hour, vial infeed via DTE 600 rotary infeed table (diameter 600 mm), includes format parts for vials 2R (Ø16 x H35 mm), 4R (Ø16 x H45 mm) and 6R (Ø22 x H40 mm)

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: - Also possible with Dacharm! - Also possible with Dacharm! Technical data: Shelf height: 3,000 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 160 Number of foot profiles: 4 pieces / IPE 160 Number of Kragarms: 12 pieces / IPE 100 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): â?¬ 290.00 in ...

We sell a lower foldable tail lift the product group Bär Cargolift folding. Type BC 1000F2-A1A/2408-A0 Operating pressure 220 bar Year of construction 2009 The tail lift is in good condition, is available and can be viewed like in Meersburg, Baden-Württemberg.

4 pcs Kragarmregalstand, one-sided, new, built year: 2019, consisting of:- Also possible with Dacharm! - Also possible with Dacharm! Technical data:Shelf height: 4,200 mmShelf depth: 1,360 mmShelf length: 4,000 mmAxis distance: 3 x 1,300 mmExtension: 1,200 mmKragarms per stand: 3 pieces (screwed)Grid: 100 mmmax. Ab. Load capacity / arm: 750 kgmax. Ab. Load capacity / stand: 2.250 kgSurface: hot-dip galvanizedCondition: newMaterial circumference: number of stands one-sided: 4 pieces / IPE 160Number of foot profiles: 4 pieces / IPE 160Number of kragarms: 12 pieces / IPE 100Number of cross bandages: 1 pieceNumber of spacers: 6 PieceIncl. Screws, dowels and debit labelsArticle locations / subject to availability: Germany Austria SwitzerlandFreight / Delivery: 5 - 10 business days after receipt of paymentFreight costs (D): â?¬ 360,00 incl. VAT Austria Switzerland by arrangementNote: ...

9 injection moulding tools for the production of rollers - along with a wide range of accessories As a result of a restructuring of our customer, we offer for sale 9 injection molds for the production of various types of castors for furniture and chair castors, including customer addresses. The pictures represent the basic nature of the different roles. These injection molds could be used to set up a complete production facility for the production of rolls. The basic body of the castors can then be supplemented with various inserts (depending on the customer's requirements) for final attachment to the end product, e.g. a chair. This offer also includes the following accessories - which are part of the production process: • 1 x punching tool (for the roller roller) • 1 x press (for pressing the pins and shafts) • 1 x automatic assembly machine for spring washers � ...

Signature RotoBraille Age: 2015 With high speed ejection cameras for bad boxes (where Braille letter was not embossed correctly) Very nice condition- Free of damages and ready to go. Machine has pre-makeready table There are 8 top and 8 bottom drums- 4 with four lines and 4 with five lines. Detection system IN-sight.

4 pcs Kragarm regalia stand with dacharm, one-sided, new, built: 2019, consisting of: Technical data: Shelf height: 3,000 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Dacharme: 1,500 mm, 5° rising or falling Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 160 Number of foot profiles: 4 pieces / IPE 160 Number of dacharme: 4 pieces / IPE 100 (with three tabs) Number of Kragarms: 12 pieces / IPE 100 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels We are happy to check for them whether this shelf is designed for their wind and snow loads! Item locations / subject to availabil ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal700 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmSpindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmClamping System ISO 7388-3 - JD30ToolchangertoolchangerType of magazine DiskNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40ba ...

4 pcs Kragarm regalia stand with dacharm, one-sided, new, built: 2019, consisting of: Technical data: Shelf height: 4,200 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Dacharme: 1,500 mm, 5° rising or falling Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 160 Number of foot profiles: 4 pieces / IPE 160 Number of dacharme: 4 pieces / IPE 100 (with three tabs) Number of Kragarms: 12 pieces / IPE 100 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels We are happy to check for them whether this shelf is designed for their wind and snow loads! Item locations / subject to availabil ...

4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: - Also possible with Dacharm! - Also possible with Dacharm! Technical data: Technical data: Shelf height: 5,200 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 180 Number of foot profiles: 4 pieces / IPE 180 Number of Kragarms: 12 pieces / IPE 100 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): &aci ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: Technical data: Shelf height: 2,150 mm Shelf depth: 640 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 500 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 1,000 kg max. Load capacity / stand: 3,000 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 140 Number of foot profiles: 4 pieces / IPE 140 Number of Kragarms: 12 pieces / IPE 80 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): â?¬ 240.00 inc VAT Austria + Switzerland by arrangement Note: Intermediate ...

4 pcs Kragarm regalia stand, on both sides, new, built in 2019, consisting of: Technical data: Shelf height: 2,600 mm Shelf depth: 2,160 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,000 mm Kragarme per stand: 6 (3/3) pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 600 kg max. Load capacity / stand per side: 1,800 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands, on both sides: 4 pieces / IPE 160 Number of foot profiles, on both sides: 4 pieces / IPE 160 Number of Kragarms: 24 pieces / IPE 80 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels - Also possible with Dacharm! - Also possible with Dacharm! Item locations / subject to availability: Germany + Austria Freight / Delivery: 5 - 10 business days after receipt of payment Freight cost ...

4 pcs Kragarm regalia stand with dacharm, one-sided, new, built: 2019, consisting of: Technical data: Shelf height: 5,200 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Dacharme: 1,500 mm, 5° rising or falling Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 850 kg max. Load capacity / stand: 2,600 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 180 Number of foot profiles: 4 pieces / IPE 180 Number of dacharme: 4 pieces / IPE 100 (with three tabs) Number of Kragarms: 12 pieces / IPE 100 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels We are happy to check for them whether this shelf is designed for their wind and snow loads! Item locations / subject to availabil ...

4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: Technical data: Shelf height: 2,600 mm Shelf depth: 1,160 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,000 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 600 kg max. Load capacity / stand: 1,800 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 140 Number of foot profiles: 4 pieces / IPE 160 Number of Kragarms: 12 pieces / IPE 80 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): â?¬ 290.00 inc VAT Austria + Switzerland by arrangement Note: Intermedia ...

Truck DAIMLER CHRYSLER Actros 2644 with loading crane HIAB 330-5 + Jib 90-4 Truck DAIMLER CHRYSLER Actros 2644, B9th3af Wheel drive 6x4, air suspension front and rear, AHK, open box with charger, FG-No. WDB9302441xxx EZ 06/04, GG 26 t, km-stand approx. 417,000, diesel, green badge, HU 09/19, 11.946 cm3, 320 kW Crane Hiab 330-5 with radio remote control Jib 90 with winch Rotzler, 3 hydraulic ejectoons + 1x mechanical ejectothe. Maximum extension 26m with lifting force 690kg

Mobile excavator TEREX / Atlas Type TW160 Y.O.M. 2010 approx. 6,300 hrs - Hydraulic adjusting boom - Quick-change system for shovel - Gripper piping - Rear-view camera - Clearing sign (unused) available. - With Rototilt (shovel can be rotated and tilted 360 degrees. Additional grippers e.g. for setting telephone poles or lanterns. (last picture) Video can be submitted on request. The clearing sign was dismantled because the excavator was used as a two-way excavator with a rail handle (without DB approval). Mechanically very little stressed excavators. The enclosed clearing shield must be adjusted to the recording. Visually and technically good condition. Bdxbjqofbb Tires bad (can be renewed on request at an extra cost)

ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemei ...

Baader 189 Filleting machine for cod and whitefish Condition: overhauled This machine processes cod, pollack, haddoch, hake employing well proved system with high fillet yield. Size range: fish from 40 to 85 cm (or 0,6 - 4,5 kg gutted fish with head) Capacity: 24-34 fish per minute Fish are loaded on to the machine after heading. The filleting tools adjust themselves to the different fish size within the operating range. For skinning the fillets have to be transferred manually to a skinning machine. Power consumption: 3 kW Water consumption: 15 liters per minute Dimensions (LxWxH): approx. 4000 x 1100 x 2400 mm Weight (net/gross): approx. 1060/1650 kg Can be combine with heading machine Baader 427 and skinning machine Bader 51 to compile a complete line.

machine measurements: 2.200 x 1.200 x 2.260 mm machine weight: 1.000 kg power capacity: -- kW Condition: used Specification: automatic control machine for O-rings - second-hand rotary transfer machine with 16 pick-up stations - year of construction approx.: 2011 - pick-up stations: 16 - measuring range: ID from 55 - 90 mm cord from 2,5 - 3,5 mm (ID 55 - 70 mm) cord from 2.5 - 4.5 mm (ID 70 - 90 mm) - Part throughput: approx. 3 - 4 seconds per part approx. 900 - 1,200 parts per hour approx. 21,600 - 28,800 parts per day - Technical application: surface defect and crack detection on O-rings - Sorting function: Good, Bad, Undefined - Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm - Weight approx.: 1,000 kg The data for this ad was created with ModulMWS - the software solut ...

Bottle Filler, make WüMa, typ: BAD 20/4, with 20-valve pressure filler and 4-head crown capper, built 1977