We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,781 used machines on RESALE, but how to find them? Machine Search
used
M. No.: 3926
used
M.- No. : 827
used
used
used
choice of plate punches : Size 35x50: 1 Beil 425 x8 H AP + Plate bender Beil PBS S 52 HB Year 2009: 1.700 euro both 2 Bacher model 2032- 300 euro each – 500 euro both 2 Special BKR model 425 400 euro each- 700 euro both 2 Heidelberg model A1.090.9016- 500 euro each- 900 euro both Size 50x70- 70x100 : 1 Bacher model 2045- 750 euro 1 Bacher model 2031- 800 euro 1 Heidelberg SM/CD Plate punch- 2.200 euro 2 Super KLS -1000 euro each – 1700 euro both 1 Bacher Control model 2000- 1.000 euro 1 OMT 70x100- 800 euro 1 Bacher Control system model 2002- 1.000 euro 1 Bacher Control model 2042- 1.000 euro All the photos and detailled punching diagram/photo for each plate punch All available immediately in our stock
used
Manufacturer / Origin: Bacher / Germany (EU)
used
used
used
Max. size= 42 x 42 cm, Availability= 082023, Plate punch Bacher 425 mm LOT Loaded in truck or container
used
Max. size= 80 x 60 cm, Availability= 042023, max. plate width 80 cm Punching distance 425 mm Machine No. 2349 LOT Loaded in truck or container
used
used
Ruler with micro adjustment
used
Format 1200 x 750 mm without ruler Working size 120x75cm 220V / 120 Watt / 50.60 cycles (Hz) Dim L130 x W80 x H130 cm
used
cleaned & checked 220 Volt / 1500 Watt / 50-60 cycles (Hz)
used
Tool cabinet / drawer cabinet / drawing cabinet Djnztt -Number of drawers / 14 pieces -Dimensions: LxWxH 1830x1430x1300mm -Weight approx. 650Kg
used
max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Plattenstanze - Plate Punch Bacher 2032 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Druckplattenstanze - Plate Punch Bacher 2032 Serial-No. 12544r Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Druckplattenstanze - Plate Punch Bacher RP22 Serial-No. 2646 For Heidelberg GTO -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
HEIDELBERG Nela plate punch Suitable for HD SM 52 / 74 /102 and XL machines Hole spacing: 425 mm and 780 mm Various year of manufacture models available
used
Creo Lotem 400 Manufacturer: Creo Model: Lotem 400 Year: 2005 4-page format Plate min.: 381 x 318 mm Plate max.: 750 x 622 mm F Speed: 15 plates/hour fiber head 24 diodes, 830nm Resolution :up to 3556 dpi ,Platewinding 37800 Bacher Control 2000 Punch Workflow ,Creo Prinergy Evo
used
- single sheet feeder - WEKO double sheet control - standard dampening units - mat chromed damping distributor - quick action plate clamps - Bacher Registersystem - standard powder spray - +Version - 38 mio. impr.
used
Creo Lotem 400 Manufacturer: Creo Model: Lotem 400 Year: 2005 4-page format Plate size min.: 381 x 318 mm Plate size max.: 750 x 622 mm F speed: 15 plates/hour Fiber Head 24 Diodes, 830nm Resolution: up to 3556 dpi Approximate number of plates produced: 37800 Bacher Control 2000 Punch Workflow connectivity: Creo Prinergy Evo 5.3 -PDF -Trapping -Proof Installed on IBM Server Excellent condition Still in operation: No Available: Ja
used
Complete Printshop from one place in germany: Manufacturer: Heidelberg Model: GTO Year of construction: 87 Size: 32 x 46 cm Totalizator status: approx. 29,450,894 Availability: in July 2021 Manual double sheet control AntiqueStatic Simco Powder device WEKO Chromed plate cylinder 2 display trolleys Sticks of paper Rubber blankets 2 clamping bars Page marks + upright + left for small formats Support plate Bacher Controll- 1 Bacher register punch with assembly and fitting strips Plus version complete numbering and imprinting device incl. 3 numbering machines + accessories Perforation device: 2 perforation and creasing insert blocks Bracket with three leaf springs Dampening system Varn Kompac III GT 46 Year: December 9, 1994 POLAR CUTTING MACHINE High-performance high-speed cutter Manufacturer: PolarMohr Model: 76 EM Year: 1993 Availabile: end of July 20 ...
used
plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 220 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD
used
used
used
HEIDELBERG GTO 52 • Year: 1988 • Size: 36 x 52 cm • Serial: 694596 • Counter: 45.396.545 • Size: 36 x 52 cm • Bacher Register 22 cm • Speed: up to 8.000 sheet/h • checked • cleaned • new rollers Good Working Condition test possible Please ask for quotation: send us an email
used
Creo Lotem 800 II Quantum 830 nm, Thermal Manufacturer: Creo Model: Lotem 800 Year: 2006 8 page format Plate size min.: 381 x 318 mm Plate size max.: 1050 x 705 mm V speed: 22-25 plates/hour Resolution: up to 3556 dpi Approximate number of plates produced: 109950 Bacher Control 2000 Punch Installed on IBM Server Excellent condition Koadak Mercury 125 PlateProcessor/Stacker
used
Creo Lotem 400, year 2005 830 nm fully automatic thermal imaging plate setter model: Lotem 400 quantum head 4 page format 3 cassette MCU Minimum plate size: 381 x 318 mm Max plate size: 750 x 622 mm F speed: 16 plates/hour resolution: up to 2540 dpi approximate number of plates produced: 100950 Bacher control 2000 punch Excellent condition
used
8 UP Thermal CTP Avalon N8 50 XT year 2008 250,000 plates produced MAL 4 cassettes, 2 punches bacher 425W 780W bridge Arkana 125 online-processor ethernet to PIF interface Price: on request
used
4 up thermal CTP Screen 4100 year: 2009 11,000 plates produced with Singel Autoloader Bacher Punch Stacker Rip Price: on request
used
8 up Thermal CTP Avalon N16–50 XT Punch system Bacher 780 Avalon N16 May 2012 Life time plates 343123 p Lifetime running 24921 h Actual running time 13276 h Exposure time 5885 h LD Status Reserve (U) 77 Current (U) 25 Reserve (L) 67 Current (L) 25 GLV replaced in may 2022 Price: on request
used
8 up Thermal CTP Avalon N16–50 XT med MAL 3 kas. Punch system Bacher 780 Avalon N16, Jan 2010 MAL, Apr 2010 Elantrix 125, march 2009 Life time plates 278218 p Lifetime running 105212 h Actual running time 11096 h Exposure time 4647 h LD Status Reserve (U) 83 Current (U) 23 Reserve (L) 26 Current (L) 23 LD (U) replaced 25, march 2022 Under AGFA Service since installation Price: on request
used
- MCU Magnus 400 II Platesetter (3 cassettes) - ca. 62.000 plate exposures - suitable for GTO / SM 52 / SM 74 plates - for processless plates - Inline punch Bacher 425 mm - Plate Stacker ADVANT PST 26 - Shooter - without RIP
used
- Installed 03-2008 - RIP program Trueflow 3 with 1 bit tif - Exposure hours from the laser 3.052 ( Total 51285 plates ) - Semi-automatic plate feed with the help of the plate loading table - Large and multi-format output – from 4 pages to 32 pages - 2 x inline Punch Bacher 2000 ( double exposure two Plates simultaneous and punching ) - 14 plates/hour 2,032 x 1,270 mm - 17 plates/hour 1,524 x 1,143 mm - 30 plates/hour: 1,030 x 800 mm (exposure of two Plates simultaneous ) - Innovative 512-channel GLV exposure head enables high-speed exposure of large-format plates or two side-by-side mounted panels Plates up to the size of 1,160 x1,270 mm. - Resolution: 1200 / 2400 / 2438 / 2540 dpi - - with GLUNZ & JENSEN Quartz III 150 plate developer - with forklift
used
- Stream feeder - Varn Kompac V dampening units - Baldwin cooling device - Quick action plate clamps - Bacher 425 mm Registersystem - Graphix Exactomat powder spray - NonStop at delivery
used
- single sheet feeder - WEKO double sheet control - ALCOLOR dampening unit - MGE cooling device - Quck action plate clamp - BACHER 425 mm registersystem - standard powder spray - N&P Device
used
OFFSET PRINTING MACHINE HB GTO 46 + Vers. WITH N&P UNIT (numbering & perforating) M. No.: 676411N // Counter (m): 45 Format (cm): 32x46 Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit Bacher control 5000
used
Straight Machine, Alcohol Dampening with Technotrans Refrigerator, Quick Action Plate Clamps, Bacher Register, Powder Spray
used
Perfector 2/2, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Cooling Refrigerator, Auto-Wash, Roland Mabeg Jet Feeder, Steel Plate on Overlap, Steel Plate on the Lining, Non-Stop Device, Super Blue, Bacher Registry System Quick Bars, Powder Sprayer, High Pile Delivery, Capacity: 15000 Sheets/h, Paper Thickness: 0,04-0,6mm, Max Paper Size: 53x74cm, Min Paper Size: 26x40cm, Start of Print: 9.5-10.5mm, Plate Format: 605x745, Plate Thickness: Max 0,3mm, Standard Accessories)
used
Reference Num.: 4028 Brand: MAN Roland Type: R 104 T 01 Construction year: 1994 Impressions: 45 mio Size: 480 x 660 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 210 x 280 mm, max 480 x 660 mm Printing speed: max 13,000 sheets/hour Printing units: 4 Machine size: Length: 4,271 mm, Width: 2,740 mm, Height: 1,865 mm Total weight: kg 1,171 / lbs 2,582 Equipment: - RCI - Rolandmatic - WEKO Puderapparat - Bacher-Registersystem - Platten Schnellspannschienen - Edelmann-K?hlung - Superblue
used
2006 SCREEN PLATERITE CTP (1200 – 2400 DPI), 405 NM WITH CASSETTE LOADER SYSTEM (INCLUDING 2 CASSETTES) GLUNZ & JENSEN RAPTOR MP68 PLATE PROCESSOR (INLINE) WITH R-70 STACKER DELIVERY, INCLUDING: INLINE 425 BACHER PLATE PUNCH
used
2010 SCREEN PLATERITE CTP COMPUTER TO PLATE MACHINE SCREEN P-TR 4300 AGE: 2010 SIZE: 83 X 66 COLORS: DESCRIPTION: INTERNAL PUNCH: BACHER 425 MM PLATE FORMAT: MAX. 830 X 660 MM. MIN. 324 X 370 MM PLATE THICKNESS: 0.15 - 0.30 MM PLATE TYPE: THERMAL ALUMINUM 830 NMTROUGHPUT: UP TO 21 PLATES/HR SCREEN TRUEFLOW DOTTIFF DOWN LOADER SCREEN MA-L4300 II MULTI AUTO LOADER 3 CASSETTES, EACH 100 PLATES
used
Year of construction: 2005 CTP system for thermal plates Autoloader Inline punching HD Autoplate / Bacher 425 mm Plate stackers Harlequin RIP 9.0 Prinect Meta Shooter 2.2 Price on request. We deliver and install worldwide!
used
- CP Tronic - Streamfeeder - Alcolor dampening units - Baldwin cooling device - Quick action plate clamps - Bacher Registersystem - Grafix Alphatronic 200 powderspray
used
- Single sheet feeder - DDS Direct dampening system - TECHNOTRANS Alpha cooling - laser-slit blade-type ink fountain - ink zone slide - HEIDELBERG quick action plate clamps - BACHER Registersystem 425 mm - standard powder spray - Perfecting 2/0 or 1/1