b b used for sale

"EIAA x BATES :: Certified Preowned" We can offer you permanently revitalized filling systems for all areas of application. OFFER: BATES filling line for valve bags (valve packers, air packers) with internal or external valve, made of paper or PE. Machine was completely overhauled in 2024: New pneumatics New electrics New control cabinet with new components, e.g. control system (Siemens LOGO!) - manufacturer-independent New software - manufacturer-independent New weighing electronics (B+L dataPond 3F, high-speed, legal-for-trade) Parts made of stainless steel that come into contact with the product (product flap, pressure chamber, filling tube) Filling tube for 135mm valve width - conversion to other valve width possible Product pre-container with load-bearing frame / stage included Pressure pump included Engineering New - Schematics, Diagrams an ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: jaw set for three-jaw lathe chuck -Jaw width: 21 mm -Dimensions: see photo technical drawing -Dimensions total: 78/63/H56 mm -Total weight: 1.3 kg

Fermentolevain Fermento Plant for the preparation and preservation of liquid sourdough with Dual Care system for the best flavors Control of the fermentation phase and preservation phase with built-in cooling easy-touch control Mixing time and speed adjustable Stainless steel Stirring tool removable with overflow probe and alarm buzzer Outlet height 440 mm 2 agitators, double flap Floor and side scrapers for high quality Tank capacity 100/125 kg Built-in frame heater and add-on cooling coil Cooling capacity per hour approx. 6°C falling Connection 400V / 50Hz / 2.1kW, 16A-CEE plug Dimensions: 820 x 1050 x 1690 mm, WxDxH New machine with 12 months warranty Optional: Built-in scale Water connection with hand shower Cleaning Cycle Maintenance contract Service Package Many more bakery machines in stock!

Manufacturer: Ruhle Type: Frozen block cutter Model: GFR 450 Infeed dimensions: 450 mm x 330 mm Knife width: 450 mm Total dimensions: 1700 mm x 700 mm x 1450 mm Voltage: 400 V, 3 Ph, 50 Hz Power: 5.5 kW, 16 A

pressure: ca.10 t throat: anpassbar mm stroke: 250 mm table surface area: 220 x 220 mm mm material diameter max.: ca. Ø 267 mm total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 899 x 772 x 1520 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece hard top jaw set -Width: 40 mm -Dimensions total: 107/120/H55 mm -Total weight: 3.2 kg

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, two-jaw thread cutting chuck -Manufacturer:Röhm, two-jaw tapping chuck MK3 -Type: MK3 B24 -Tool holder: square up to 24 mm see photos -Dimensions: Ø 85 x 245 mm -Weight: 4.4 kg

Inv. Num. : 7787 Type: JR1.40 Producer: CMS Brembana Created: 2012 Parameters: Work table length: 2600 mm Work table width: 1700 mm A set of tools and gears for various tools (cup wheels/saws/chamfer discs) are available for the machine.

4-fold plush pretzel curtain Mobile machine made of stainless steel with locking castors for sheet metal covering 580 x 980 mm Dimensions (WxDxH) in mm: 1140 x 840 x 1,180 (parking position) Dimensions: 2,700 x 840 x 1,180 (working position) DGUV V3 tested Connection 400 V, 16A-CEE plug NEW Machine with 12 months warranty + spare parts service Optional: - Tank heater 3 kW - Roller salter with guide shaft - Electrical preparation for later retrofitting of the salter - SA conversion of storage, transfer belt + assembly on site according to effort - Feed + functional instruction (according to effort) -Maintenance contract - Service package

Butter Bulk Packer Make : APV Model : B-BP Capacity : 5-25 kg Productivity: 3000 kg per hour max Tank Silo with screw augers Twin Screw Augers for butter Inlet of Product : Window opening or Direct connection from source ( CBM, Butter pump, Silos) Outlet : Butter Bulk Packing in Bag in Box with push off system Guards : Safety Guards on Filling Roller Conveyor on to Check Weighing system with roller conveyor Box Tape Closing Machine and metal detector IQ LOMA

Spare parts for Battenfeld injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets

Capacity: 1.100 Ltr. Operating pressure: 5.0 bar, with technical documentation Year of Make: 1987 Manuf.: Binder, Crailsheim Material: stainless steel, 1.4301 Design: Cylindrical sthd, on 3 feet, outlet with disc valve DN 32, pulled down cleaning line with spray head and pressure fitting, sample tap, disc valves DN 32, manhole cover last use: beer Height approx. 2,280 mm (with cleaning line) Diameter: approx. 900 mm Prices plus VAT. VAT, from our warehouse, free truck loading!

-electrically heated, heat output approx. 70 kW for temperatures up to 200 C -Titanium control

BOEHRINGER VDF V 800 universal lathe was built in 1977 in Germany. The machine, designed for precision machining of workpieces with a maximum diameter of 800 mm and a length of 1500 mm, is distinguished by its robust construction, which ensures excellent stability during even the most intensive challenges. On the other hand, the spindle features an optimised speed range, allowing efficient turning using both high-speed steel and carbide-tipped tools. All of this makes the BOEHRINGER lathe the perfect choice for both unit and series production. The total weight of the machine is approximately 5400 kg. Technical specifications of the BOEHRINGER VDF V 800 metal lathe - maximum turning diameter above the bed: 800 mm - maximum turning diameter over the slide: 515 mm - maximum turning length: 1500 mm - maximum spindle rotational speed: 1120 rpm - minimum spindle rotational speed: 5.6 r ...

Pressure control valve, pressure control directional valve -Manufacturer: Festo, pressure regulator valve -Type: unfortunately without type designation -Operating pressure: 0-16 bar -Dimensions: 120/100/H95 mm -Weight: 0.4 kg

Fermentation Delay Cabinet Blue Moon for 24 trays 600 x 800 mm at a distance of 63 mm fully assembled, Power unit standard, top mounted Temperature from -15° to + 40°C max. Humidity up to 90% for the best dough flow Computer control Interior and exterior walls made of PVC Connection 230V, 1.3 KW, ready to plug in DGUV V3 tested Dimensions: 760 x 1090 x 2325 mm, WxDxH NEW device 12 months warranty Optional: Interior and exterior walls made of stainless steel Aggregate external Maintenance contract Service Package More TOP proofers in stock!

CNC Vertical Slot Milling Machine Year of Make: 1989 Workspace: x-axis 1300mm y-axis 150mm z-axis 200mm Tool holder: SK40 Spindle speed: 350 rpm – 4000 rpm Max. groove length: 1200 mm Max. groove width: 40 mm Clamping area: 1300 mm x 300 mm Weight: approx. 3500 kg Coolant Setup Dimensions: 1600 mm x 1500 mm x 1800mm (LxWxH) Hydraulic system Partially overhauled, milling spindle new. Commissioning within a radius of 200 km included in the price.

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis forklift T 25 -Gearbox: Hurth HFP 50 -Wheels: Ø 380 x 180 mm -Individual components: see photos -Price/Delivery: complete -Transport dimensions: 440/400/H500 mm -Total weight: 179 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis made from forklift truck -Type: unfortunately without a type designation -Hole: Ø 260 mm, dimensions see photos -Wheels: Ø 282 x 100 mm dual tires -Dimensions: 430/400/H360 mm -Weight: 99 kg

Koenig and Bauer Alphajet Into Inkjet printer MID060 2020, Stainless inkjet printer, auto jet closure, heated ink chamber, touch screen controls, extremely low solvent consumption - 2ml/h (at 20'C) high quality bar codes and 2D codings, 1Ph

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis made from forklift truck -Type: unfortunately without a type designation -Hole: Ø 260 mm, dimensions see photos -Wheels: Ø 282 x 100 mm dual tires -Price/Sale: complete -Dimensions: 430/400/H360 mm -Weight: 99 kg

BRUDERER BSTA 25 Precision high speed punching press. Nominal capacity: 250 kN; 25 tons. Min./Max. number of strokes: 100/1500. Max width of strip: 200 mm. Adjustable stroke: 13, 16, 19, 25, 32, 38 mm. Fitted with roll feeder BBV 202/120 on left hand side. Feed length variable up to 120 [mm] max. Optional: Sound insulating cabin. Condition: good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted on rubber feet. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 200 mm. Slide/Ram adjustment 51 mm. Documentation in German or English language included. Press weight cca. 4800 kg. Press dimensions: 2055 x 1355 x H26200 mm.

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet -Manufacturer: Weidmüller, Ethernet Switch -Type: IE-SW-BL05-5TX -Dimensions: 80/50/H125 mm -Weight: 0.2 kg

Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: • TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device • DVE 9070 Cover and protective film removal • SFM 5072 Filling and sealing machine • NTS 8140 Transport system • Output max. 36,000 disposable syringes/h, infinitely adjustable • For disposable syringes 0.5 - 10 ml depending on format set • For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set • For 100 mm nest • For tub H max. 130 mm • Parts in contact with the product made of stainless steel AISI 316L • IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English • Calibration (KAL) for all process-relevant measuring systems • Material specification • PLC Siem ...

Servo motor, electric motor, DC motor, stepper motor, stepper motor Manufacturer: Nucleus, servomotor -Type: NUDrive MP85 10A Bgr2 R Rev2 -Item No.: DS851026 -Shaft: Ø 14 x 37 mm -Number: 11 servo motors available -Price: per piece -Dimensions: 200/85/H85 mm -Weight: 4.1 kg/pc.

Double-spindle machining centre in 5-axis design Travel x/ y/ z = 600/ 600(975) / 500 mm Number of spindles 2 Spindle spacing 600 mm Rapid traverse 45 m/min Spindle speed up to 17,500 rpm Drive power 38 kW Tool magazine 2 x 72 tool positions Tool holder HSK 63 CNC control Siemens 840D 1 x Tool breakage detection 2 x tension bridge support H75 mm 2 x tension bridges 5th axle Coolant system Knoll, 70 bar 1 x chip conveyor KB1000 1 x Drill Head Indexing 2 x Tool Planing System Control 2 x Upgrade Kit Torsion Compensation A/U Axis

Cutting lenght 6100 mm Cutting thickness 16 mm

Key data: 6 KW, 7 kVA, 400 V

Emergency power generator, power generator, Bauer GFS-6 ATS, unused, orig. packaging, never been in use! Continuous power of 6 kW / 7.4 kVA. LxWxH 1,070 mm x 745 mm x 815 mm Weight 180 kg Net weight. Easy operation and maintenance. Specifications: Max. power [kW/kVA/HP] 6.5 / 8 / 8.87 Continuous power [kW/kVA/HP] 6.0 / 7.4 / 8.15 Nominal voltage [V] 230 / 400V Frequency [Hz] 50 Speed [rpm] 3000 Power factor [cos f] 0.8 Tank capacity [L] 20 Housing colour RAL 3000 Running time approx. 8-10 hours per tank Operating noise: Sound pressure level LPA [7m] [db(A)] 75 Engine: Power 8 kW / 9.0 kVA / 10.8 hp 1 cyl. Diesel Fuel Type: Diesel Emission standard: none Number of cylinders 1 Starter Electric with Battery On-board voltage [V] 12V Battery voltage [Ah] 230 / 400V Cooling System Air Cooling Generator: Model 6.5 kW 3000 rpm Generator system Brushless, self- ...

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Manufacturer: Festo, solenoid valve -Type: unfortunately no exact type designation -PN: 2.5 - 10 bar -Dimensions: 125/110/H30 mm -Weight: 0.5 kg

Drill, rotary drill, magnetic drill, impact drill -Manufacturer: Bosch, impact drill case -Type: PSB 650 RE - Mounting: Quick-release drill chuck -Nominal power input: 650 W -Connection: 230 volts -Case dimensions: 390/345/H110 mm Total weight: 3.1 kg

Power supply unit, DIN rail power supply unit, switching power supply unit -Manufacturer: Block, DIN rail power supply -Type: PVSB 400/24-40 -Input: 400-500 VAC/50-60 Hz/2.2-1.8 A -Output: 24 V 40 A -Dimensions: 205/130/H130 mm -Weight: 3.1 kg

grinding diameter: 630 mm grinding length: 4000 mm centre height: 335 mm total power requirement: 28 kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine with accessories -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 33.2 kg

Output infinitely adjustable up to 7000 bottles/hour. Number of screw heads 8 pcs. Installed power 1.68 kW Supply voltage 220/380 V; 60 Hz Compressed air requirement 0.3 m 3 Compressed air operating pressure max. 0.6 MPa Overall dimensions (length x width x height) 1450x950x2800 mm Weight 600 kg

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

Make: BITZER Type: 6H-35.2Y-40P Flow rate: 110.5 m³/h Speed: 1450 rpm Operating current: 61A incl. BITZER liquid collector Type: F1052T Year of Make: 2008 Volume: 105L Min/Max Temp.: -10°/120°C Max. permissible. Pressure: 33bar Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 29.4 kg

Jack, support jack, lifting stand, bottle jack, mechanical lifting stand, axle jack -Lifting jack: Spindle jack -Type: unfortunately without a type designation -Height: 330 to 545 mm -Quantity: 1x lifting jack available -Dimensions: 240/140/H330 mm -Weight: 8.6 kg

Power strips, portable power strips, solid rubber power strips, adapters, construction site power distribution boxes, CEE adapters -Manufacturer: Bals, CEE adapter 32A / 16A -Transport dimensions: 255/145/H165 mm -Weight: 2.6 kg

Power strips, portable power strips, solid rubber power strips, adapters, construction site power distribution boxes, CEE adapters -Manufacturer: Bals, CEE adapter 63A / 32A -Transport dimensions: 255/145/H165 mm -Weight: 3.3 kg

Winder : Bandera Model W 400/1 Contact winder / surfacewinder Roll diameter max: 1200mm Roller width: 1200mm Roll width max: 1100mm Speed: max. 55m/min Longitudinal cutting device 2 or multi-lane Side Slitting Device Automatic roll change Cross-cutting device Role magazine Calibration device Reifenhäuser Low-friction rollers motor adjustment Adjustment range: for 500-1100mm laying width takeoff unit: Type TPE-1200 Side gusset insertion device Drive: 4-pole 4kW with axial fan Electric cabinet

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 32 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/95/H70 mm -Total weight: 4.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 21 mm -Dimensions: see photo technical drawing -Overall dimensions: 75/65/H60 mm Total weight: 1.4 kg

Condenser Make: Bitzer Type: LH84 Power: 22.3 kW with fan Make: Hidra R13R-4530A-3546 Power: 450W at 1340RPM Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 16 mm -Dimensions: see photo technical drawing -Overall dimensions: 52/48/H36 mm -Total weight: 0.4 kg

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

Control Fanuc ... 32i - B Turning diameter ... 20mm Turning length... 250mm Axis Y Tool turrets/driven tools ... 39/15 Bar Feeder Spindle speed ... 0-12000 rpm Machine weight ... 3300kg L x W x H ... 2100.0 × 1200.0 × 1900.0mm The machine is in good condition, possible to test under power.

5 feeders 370 1 cover feeder 1529.0416 (s/n NN26787) 1 stitching unit Bravo MM 380.0450 (s/n MMZ01077446) + 2 x HK75 heads 1 MM 449 trimmer 1 Rima stacker 3 x compressors Counter : 10 511 working hours More pictures available upon request.

Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Carousel milling machine 1 shaft for BERMAQ cats mod. C.T.C. - CE - used - Drilling unit - spindle moulder - matr. 02010 - year 2002