avankaick used for sale

Stainless steel mixer Content 4 litres Power 1.1 kW for powdered to pasty products 2 pieces available

Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request

Machine name: Continuous horizontal mixer dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Hsyqeirqy Version: EExdellCT4 Total capacity: 235 litres Wetted parts: stainless steel 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: Yes Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used Price: On request

General SKU221U127 LocationBarneveld MakeAVA-Huep GmbH u. Co. KG TypeHVW-VT 300 Mach.No.2006-192 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket15 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume492 Ltr. Motor7.5 KW Specified Features - Conical dryer Conical dryercheck Mixing shaft with ribboncheck Capacity492 Ltr. Largest cone diameter880 mm Cone height940 mm Dished topcheck Stainless steel armcheck Top drivecheck Motor7,5kW, 400/690 Volt, 1440 rpm. (EX) Cantilevered screwcheck With jacketcheck 27 Ltr. and 2 Ltr. Max. temperature-20/200°C Bottom outletcheck Internal side is polishedcheckground Ra < 0.8 µm and electropolished Suitable for liquid/pastecheck MaterialStainless steel 1.4404 Information Year of construction2006 Mounted on framecheck Total height5,24 m CEcheck Floorspace2x1,6 m Wei ...

General SKU045R150 LocationBarneveld MakeAVA-Hueb GmbH TypePerlrussm. HRM 600 No.5257 Year of construction1997 Pressure Working pressure0.1 Bar Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor55 KW Specified Features - Paddle mixer Continuous mixercheck Trough sizesDia. 600x3000mm Inlet630x450mm Outlet500x340mm With jacket2 x 95L Max. temperature100C Motor55 KW, 400/690 Volt MaterialStainless steel Information Mounted on framecheck Floor space5,2x1,0 M Total height1,3 M Technical specs Extra informationapproximately 0,1 bar working pressurePaddle mixersAva-HuepMixers > Paddle mixersBrand > Ava-Huep What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...

General SKU053P249 LocationBarneveld MakeAVA-Hueb GmbH TypeHRM 600 No.M 5309-98 Year of construction1998 Pressure Working pressure0.1 Bar Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor55 KW Specified Features - Paddle mixer Paddle mixerContinue menger Continuous mixercheck Trough sizesDia. 600x3000mm Inlet450x630mm Outlet450x330mm With jacket(2x 95 Ltr.) Motor55 KW, 380/660 Volt, 980 Rpm MaterialStainless steel Information Floor space5,2x1,0 M Total height1,25 M Technical specs Extra informationapproximately 0,1 bar working pressurePaddle mixersAva-HuepMixers > Paddle mixersBrand > Ava-Huep What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

AVA mixer HTK 2100, capacity 2090 ltr, can be used as a batch or continuous mixer, with gearbox but without motor (3o kw). prepared for 4 cutter heads. Mixer is unused.

8 up Thermal CTP Avalon N16–50 XT Punch system Bacher 780 Avalon N16 May 2012 Life time plates 343123 p Lifetime running 24921 h Actual running time 13276 h Exposure time 5885 h LD Status Reserve (U) 77 Current (U) 25 Reserve (L) 67 Current (L) 25 GLV replaced in may 2022 Price: on request

Industrial Ethernet switch, network switch, LAN switch, rail switch -Manufacturer: Avantech, EKI Switch -Type: EKI-2525-AE -Outputs: 5 -Voltage: 12-48 VDC -Dimensions: 100/35/H150 mm -Weight: 0.6 kg

For sale : 2 pcs. the complete TEM-EVO cabinets (w/CPU 1247 3959 KZ) 1 pc. Operating terminal BRT 1247 3955 KZ 2 pcs. I/O-Controller module CMPS 1247 0960 KZ 4 pcs. I/O-Controller module CM16DI 1247 0962 KZ 4 pcs. I/O-Controller module CM8DO 1247 0963 KZ 2 pcs. I/O-Controller module CM16DO 1247 0964 KZ 8 pcs. I/O-Controller module CM8DIO 1247 0965 KZ 14 pcs. I/O-Controller module CM2AI 1247 0966 KZ

Description: Operating hours: 1,124 First registration: 01.01.2021 Fuel type: Diesel Engine power: 42 kW Upholstery/color: Synthetic leather/black Gearbox: Automatic Number of keys: 1 Equipment: Floor planner Pallet fork Shovel Front left tire damaged Approx. Onsite Dimension. (l x w x h): 3,400 x 1,500 x 2,200 mm, weight approx.: 4,500 kg

Altas Motoren im Austausch sofort ab Lager verfügbar. Motoren-Typen:BF4M1013E,BF4L1011T,BF4M1008(LDW1204T),F4M1008(=LDW1204) ,F3M1008(LDW903) BF4M2011,BF4M2012C/BF4-6M2013/C Hatz-Motoren:alle Typen ab Lager lieferbar:ES75/79/780/785/786/1D80/1D81 ansonsten schnelle und günstige Motor-Überholung mit 1 Jahr Garantie info@miw-zeven.de

Spinner for Agfa Avantra 44S ,20,000 RPM, refurbihed 2013, with warranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us.

<br>Spinner for Agfa Avantra 44s, 20,000 RPM, refurbihed 2013, with warranty. We have all spareparts for Agfa Avantra 25/30/44, AccuSet... on stock. Don't hasitate to contact US.<br><br><br>

2 Thermal VLF Systems: 1 x AGFA Avalon VLF A xxt year : 2006 5000 paltes with new Laserhead AGFA VLF Platemanager with AGFA Elantrix 150 Onlineprocessorwit transit table to the oven. with Haase oven OG15FU with transit table to gum unit withGum unit RSH with explanation table Price: on request 1x AGFA Avalon VLF A xxt year : 2006 Price: on request

VLF Thermal CTP AGFA Avalon VLF Model: AGFA Avalon 50 XT size: 120 x 160 cm year: 2006 with AGFA Platemanager with AGFA Cleanout unit with Tiff shooter Price: on request

cutting range for steel to: 18,0 Trennschnitt mm cutting range for steel to: 14,0 Qualitätsschnitt mm capacity at 100%: 30,0 Ampere cutting medium: Druckluft output: von 20 - 40 Ampere output: Eingang 4,7 KW voltage: 230 V range L-W-H: 480 x 210 x 340 mm weight: 17,9 kg Cuts carbon steel, stainless steel, aluminum, copper and more... The air plasma cutting system Avalon 40.1 Air with integrated compressor is Your reliable partner for demanding applications. Run with the Avalon 40.1 Air cuts up to a material thickness of 18 mm. Properties: - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow - to set the test air pressure without having to trigger the burner. - Lightweight and compact - Intelligent protection function protects the plasma torch from damage - such as incorrect air pressure, missing consumables, pilot arc o ...

cutting range for steel to: 35,0 Trennschnitt mm cutting range for steel to: 25,0 Qualitätsschnitt mm capacity at 100%: 61,0 Ampere cutting medium: Druckluft output: von 20 - 65 Ampere output: Eingang 7,8 KW voltage: 400 V range L-W-H: 595 x 250 x 890 mm weight: 24,0 kg Cuts carbon steel, stainless steel, aluminum, copper and more... Cutting - clean and reliable. The air plasma cutting system Avalon 65 Air with integrated compressor is your reliable partner for the demanding use. Make slitting cuts up to with the Avalon 65 Air a material thickness of 35 mm. Properties: - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic arcing properties - CNC connection interface - HF-free arc ignition for increased reliability and low EMF exposure - Manual airflow activation switch to test air pressure set without firing the burner - Intelligent  ...

8 up Thermal CTP Avalon N16–50 XT med MAL 3 kas. Punch system Bacher 780 Avalon N16, Jan 2010 MAL, Apr 2010 Elantrix 125, march 2009 Life time plates 278218 p Lifetime running 105212 h Actual running time 11096 h Exposure time 4647 h LD Status Reserve (U) 83 Current (U) 23 Reserve (L) 26 Current (L) 23 LD (U) replaced 25, march 2022 Under AGFA Service since installation Price: on request

Complete system installed in 1997 - still in production - Avantra 44S with 3600 dpi - Online Rapiline for Avantra44 - Collecting basket, cable, everything with The whole system was under maintenance contract, is complete tested and cleaned Available: in production

<br>Spinner for Agfa Avantra 44 s - Clompete general&2011 with warranty<br><br>Verf Gbar: now

<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now

control panel for Avantra25 - all details can be seen on the picture. The panel is tested and comes from a functional Avantra25. Available on stock

cassette for Avantra25 - all the details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

input cartridge for Avantra25 - all details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

drive motor for Avantra25 - all details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

Complete laser and focus module for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

<br>Complete system - still in production -Avantra 44 with 3600 dpi -AgfaLine 44 - short online processor -Agfa PDF-Rip -Agfa PrintDrive Series 3<br><br><br>Verf Gbar: after 10.07.2011

<br>AGFA Avantra 30 with short developers in excellent condition. Total size: 1200, 1800, 2400 and 3600 dpi - max. screen: 75.4 x 63.5 cm.<br><br>Verf Gbar: now

Spinner for Agfa Avantra 30 ,30,000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Available: Yes

Spinner for Agfa Avantra 25,20,000 RPM, refrushed 2011, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Available: Yes

Spinner für Agfa Avantra 30 ,30.000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Available: Ja

Spinner für Agfa Avantra 30 ,30.000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Available: Ja

AGFA Avantra 30 with short Developer in great condition. Resolution: 1200, 1800, 2400 and 3600 dpi - max. image area: 75,4 x 63,5 cm. Available: now

Complete System - still in production - Avantra 44 with 3600 dpi - AgfaLine 44 - short Online Processor - Agfa PDF-Rip - Agfa PrintDrive Series 3 Available: after 10.07.2011

Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Cooling Unit for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

Complete Laser Modul for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

Transport Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Supply-Cassette for Avantra25 - see all details in the picture. The Cassette is out of a well working Avantra25. Available: on stock

Takeup-Cassette for Avantra25 - see all details in the picture. The Cassette is out of a well working Avantra25. Available: on stock

Panel for Avantra25 - see all details in the picture. The Panel is out of a well working Avantra25. Available: on stock

AGFA Powersupply for Avantra 36 and Avantra 44 Available: now

Carriage for Agfa Avantra 44 - see picture Available: now

Spinner for Agfa Avantra 44S - clompete refurbished Jan.2011 with warranty Available: now

Complete System YOM 1998 - installed 1999 - still in production - Avantra 44S with 3600 dpi - Online-Rapiline for Avantra44 - Basket, Cables, all complete System with Service-contract, complete tested and cleaned Available: in Produktion