oven 650 inner 1x1x1.2m (possible various size) t max 650 PLC Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme ...
cutting diameter: 225 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 245 x 150 mmcutting speed: 45/90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mm: 90 mm: 90 mm: 145 mmImpact energy: 145 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,2 tdimensions: 1,43 x 0,72 x 1,7 m- Miter cuts up to 60 ° left-Vise with quick release device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw band length: 6300 x 41 x 1,3 mmmachine weight ab.: 2800 kgcapacity 90 degrees: flat: 410 x 700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 510 mmcapacity 90 degrees: square: 480 mm: 610 x 450 saw band length: 5320 x 34 x 1,1 mmband speed: 15 - 100 m/mintable height: 820 mmtotal power requirement: 3,0 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,65 x 2,8 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 520 mmcapacity 90 degrees: square: 450 mm: 680x400 capacity 45 degrees: round: 470 mmcapacity 45 degrees: square: 430 mmcapacity 45 degrees: flat: 470x400 mmcapacity 60 degrees: round: 310/280 mmcapacity 60 degrees: square: 310/280 mmcapacity 60 degrees: flat: 310/280x380 mmsaw band length: 5870 x 34 x 1,1 mmband speed: 15 - 100 m/mintable height: 840 mmtotal power requirement: 3,0 kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 5,4 x 3,3 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 300 mm: 300 mm: 300 x 260 mmsaw band length: 3920 x 34 x 1,1 mmtable height: 780 mmband speed: 20 - 100 m/mintotal power requirement: 3,7 kWweight of the machine ca.: 1,65 tdimensions: 2,0 x 2,05 x 1,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 330 mm: 330 mm: 400x330 mmsaw band length: 4570 x 34 x 1,1 mmtable height: 800 mmband speed: 20 - 100 m/mintotal power requirement: 3,7 kWweight of the machine ca.: 2,35 tdimensions: 2,23 x 2,15 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 460 mm: 460 mm: 460 x 460 mmsaw band length: 5450 x 41 x 1,3 mmtable height: 800 mmband speed: 20 - 100 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 3,2 tdimensions: 2,675x 2,15 x 2,05 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 550 mm: 550 mm: 550 x 550 mmsaw band length: 5980 x 41 x 1,3 mmtable height: 800 mmband speed: 20 - 100 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 3,8 tdimensions: 3,0 x 2,15 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 310 mm: 310 mm: 340 x 310 mmsaw band length: 3730 x 34 x 1,1 mmtable height: 922 mmband speed: 15 - 100 m/mintotal power requirement: 3,0 kWweight of the machine ca.: 1,65 tdimensions: 1950x1755 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Name: Band saw Manufacturer: FAS GŁOWNO Model: PTV 150x600 Serial number: 645 Control: MITSUBISHI Cutting range: Belt width: 10-600 mm Maximum height: 150 mm Minimum dimensions of the batch part up to grips when cutting along the side longer is 100x2500 mm Minimum dimensions of the batch part up to grips when cutting along the side shorter is 1000x700 mm Tape dimensions: 41x1,3 mm Belt speed: 15-300 m/min Belt drive motor power: 7.5 kW Height of the work surface: 1 480 mm Machine dimensions: 6800x10000x2900 mm Weight: 20,000 kg Year of Build: 2016 Equipment: Chip conveyor ROSAMET TTM 400x9162x1050, serial number 109, year X8fdwgez production 2016 Control cabinet Roller table 1500x700 – 2 pcs. Roller table 2800x700 – 4 pcs. Stairs to the entrance to the platform
cutting diameter: 400 mmsaw band length: 6200 mmcutting width: 400 mmfeed length: 3-6000 mmweight of the machine ca.: 3.9 tChip conveyorbar supportswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mmsaw band length: 4100 mmcutting width: 32 mmweight of the machine ca.: 1.5 t2 column executionmore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 230 mmsaw band length: 2730 x 27 mmcutting width: 0,9 mmcapacity 90 degrees: flat: 320 x 130 mmcapacity 45 degrees: round: 180 mmcapacity 45 degrees: flat: 230 x 100 mmcutting speed: 35 - 70 m/mincutting angle: + - 45 °hydraulic motor: 0,37 kWcoolant pump: 0,12 kWsawing motor: 1,5 kWtotal power requirement: 2 kWweight of the machine ca.: 440 kgdimensions of the machine ca.: 1,4 x 0,9 x 1,3 mSetting of the saw pressure by hydr. cylinderCooling device,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 350 mmsaw band length: 4160 x 34 x 1,1 mmcutting width: 350 mmcutting capacity - flat: 400 x350 / 90° mmcutting capacity - flat: 290 x 300 / 45° mmcutting capacity - flat: 400 x 350 / 30° mmcutting capacity - round: 350 / 90° mmcutting capacity - round: 320 / 30° mmcutting capacity - round: 320 / 45° mmfeeds - fine adjustment: 20-100 mmhydraulic motor: 0,37 kWcoolant pump AC: 0,12 kWdrive motor: 2,2 kWtotal power requirement: 2,7 kWweight of the machine ca.: 1,05 tdimensions of the machine ca.: 2100 x 1300 x 850 mAccessories :automatic sawing functions, hydraulic clamping, material feed viadriven rollers, pneum. adjustable lowering speed,sawing programs adjustable via touch screen,EU quality and CE standards,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting range max. at 90° around 270 mm, Cutting speed 17 - 106 m/min infinitely variable Band saw blade dimensions 3900 x 34 x 1.1 mm automatic material feed hydraulic, multiple feed hydraulic clamping stick Main drive 2.2 kW Incl. NC Control MAC 50 Roller conveyor approx. 2500 x 400 mm Manual, CE conformity
cutting diameter: 220 mmsaw band length: 3000 x 27 x 0,9 mmtable height: mmcutting width: 200 x 280 mmcutting speed: 25 - 90 m/min: 130 mm: 120 mm: 200 mmImpact energy: 220 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tdimensions: 0,8 x 1,7 x 1,9 mMiter cuts to 60 ° left- cutting speed 35/70 m / min.- Vice with rapid clamping device- Bandsaw blade guide made of hard metal- Band tension control- Electric cooling automatic.Currently only available in red.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mmsaw band length: 3150 x 27 x 0,9 mmtable height: 700 mmcutting width: 250 x 320 mmcutting speed: 25 - 90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mm: 120 mm: 120 mm: 190 mmImpact energy: 190 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tdimensions: 0,95 x 1,16 x 1,98 mMiter cuts to 60 ° left- cutting speed 35/70 m / min.- Vice with rapid clamping device- Bandsaw blade guide made of hard metal- Band tension control- Electric cooling automatic.Currently only available in red.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The KASTOtec AC5 is a fully automatic High-performance metal band saw for steel Manufacturer: Kasto Type: Tec AC5 Built: 2007 Saw band: 7675 x 54 x 1.3 mm Connected power: 23 KW Working area square 90° max.: 530 x 530 mm Working area Flat 90° max.: 530 x 630 mm Working range Around 90° max.: 530 mm Feed length (600mm in one stroke): 6-9999 mm Clamping device: hydraulic Weight (saw) approx.: 5750 Kg Dimensions LxWxH (without chip scraper)ca.: 2225 mm x 3855 mm x 2680 mm Installation area LxW approx.: 2225 mm x 3855 mm Addition: The sawing plant is in working condition and was used until dismantling. The condition of the machine is to be evaluated as good. The sale of this system is only to traders without guarantee and to the exclusion of any rifle performance. We accept no liability for errors or printing errors.
automatic feeder: ja material length: 460 mmmaterial width: 320 mmweight of the machine ca.: 2 tdocumentation: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw band length: 4115 mmsawing motor: 4,0 kWcutting width at round material: 250 mmcutting width at rectangle material: 250 mmcutting length min.: 6 mmcutting diameter: Min. 10 mmfeed length: 1800 mmcutting speed: 15-125 m/mincoolant tank: 60 ltotal power requirement: 6,5 kWweight of the machine ca.: 1,9 trequired space: 2,15 x 1,95 x 2,04 mFully automatic KASTO band saw machineType SSB 260VAHydraulic saw blade tension, set at the factory.incl. roll feed 4000x500mmincluding chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 400 mm: 400 mm: 1 tfeed:: in einem Schub 750 mm: output: 8 kwweight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 406 mmsaw band length: 6760 mmcutting width: 41 mmdimensions of saw-band: 6760 x 41 x 1,3 mm: 450/560 x 400 mmcapacity 90 degrees: square: 700 x 400 mmcutting speed: 18 - 95 m/minmachine weight ab.: 4230 kgdimensions of the machine ca.: 3200 x 3250 x 2300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 406 mmsaw band length: 6760 mmcutting width: 41 mmdimensions of saw-band: 6760 x 41 x 1,3 mm: 450/560 x 400 mmcapacity 90 degrees: square: 700 x 400 mmcutting speed: 18 - 95 m/minmachine weight ab.: 4230 kgdimensions of the machine ca.: 3200 x 3250 x 2300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 230 mm: 230 x 230 mmsaw band length: 2950 x 27 x 0,9 mmtable height: mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,2 tdimensions: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mmsaw band length: 2950x27x0,9 mmtable height: mmband speed: 36/72 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 440 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mmcapacity 90 degrees: flat: 280 x 220 mmcapacity 90 degrees: square: 220 x 220 mmvice: 285 mmturning speed range:: 36/72 m/mindimensions of saw-band: 2950x27x0,9 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 485 kgdimensions of the machine ca.: 1700 x 100x 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 280 mmsaw band length: 3320 x 27 x 0,9 mm mmcutting width: 330 mmControl: NC capacity 90 degrees: flat: 330x 260 mmcapacity 90 degrees: square: 260 x 260 mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,24 tdimensions of the machine ca.: 3,3 x 2,83 x 2,23 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 300 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 x 250 mmcapacity 60 degrees: flat: 170 x 170 mmcapacity 60 degrees: square: 170 x 170 mmcapacity 60 degrees: round: 180 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3320 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 300 mmsaw band length: 3320 x 27 x 0,9 mmtable height: mmband speed: 40/80 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 670 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 300 mmsaw band length: 3320 x 27 x 0,9 mm mmcutting width: 300 mmControl: NC capacity 90 degrees: flat: 330x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 3,3 x 2,83 x 2,23 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 300 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 x 250 mmcapacity 60 degrees: flat: 170 x 170 mmcapacity 60 degrees: square: 170 x 170 mmcapacity 60 degrees: round: 180 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3320 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 355 mm: 350 x 350 mmsaw band length: 4640 x 34 x 1,1 mmband speed: 15 - 115 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 2,8 tdimensions: 3,2 x 2,2 x 2,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 355 mm: 350 x 350 mmsaw band length: 4640 x 34 x 1,1 mmtable height: mmband speed: 15 - 115 m/mintotal power requirement: 4,0 kWweight of the machine ca.: 2,8 tdimensions: 3,1 x 2,2 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 330 mmcapacity 90 degrees: flat: 510 x 320 mmcapacity 90 degrees: square: 320 x 320 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3440 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 300 mmsaw band length: 3320 x 27 x 0,9 mm mmcutting width: 300 mmControl: NC capacity 90 degrees: flat: 330x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 3,3 x 2,83 x 2,23 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Missler DEB 410 Automatic Horizontal Bandsaw Capacity 410 x 410 mm Swarf Conveyor Dimensions: Length: 3785 mm (inc. swarf conveyor) Width: 2100 mm Height: 2140 mm Weight: 4000 Kg
roll diameter: 420 mmthroat: 400 mmworkpiece height: 280 mmtable-size: 670 x 670 mmtable inclinable two-sided: links 10, rechts 15 Gradsaw band length: 3560 x 20 mmcutting speed: 10 - 2200 m/minhydraulic motor: 0,25 kWdrive motor: 1,5 / 2 kWtotal power requirement: 2,25 kWweight of the machine ca.: 0,65 tdimensions: 1,1 x 1,0 x 1,9 mmwith welding device IDEAL Type BSS 016 for welding saw bandssome bands for replacementThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
work piece width: 1200 mmworkpiece height: 500 mmbore diameter: 35 mmdimensions of saw-band: 8800 x 54 x 1,6 mmspindle taper: SA 40 Number of drilling agregates: 3 Stk.spindle speed:: 200-800 U7mincutting speed: 17-110 m/minmitre joint cuts -/+ degrees: 45 Gradfeed: max. 300 mm/minspindle stroke: vertikal 0-350 mmControl: 7- achsig numerisch size of profile - max.: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCutting area: 1200 x 500 mmRound material: at 90 ° = 530 mmFlat material: at 90 ° = 1200 x 500 mmRound material: at 45 ° right / left = 530 mmFlat material: at 45 ° right / left = 700 x 500 mmDimensions machine approx. LxWxH: Bohranl .: 4.26 x 0.95 x 2.9 mDimensions machine approx. LxWxH: Saw: 4.9 x 2.32 x 3.36 mDimensions control cabinet: 2000 x 750 x 2000 mmSpace requirement approx .: W: 4.26 x D: 0.94 x H: 2.97 mRoller conveyo ...
dimensions of saw-band: 2085x20x0,9 mmcapacity 90 degrees: round: 185 mmcapacity 90 degrees: square: 150x150 mmcapacity 90 degrees: flat: 220x150 mm: 110 mm: 100x100 mm: 110x90 mmcapacity 60 degrees: round: 70 mmcapacity 60 degrees: square: 70x70 mmcapacity 60 degrees: flat: 70x70 mmvoltage: 400 Vsawband speed: 35 + 70 m/min.: 230 mmtotal power requirement: 0,75 kWweight of the machine ca.: 195 kgdimensions of the machine ca.: 1280x550x1480 mmDomestic equipments:- stepless, electronic speed control- Optional hydraulically controlled or manual belt arm lowering- Saw arm can be swiveled up to 60 ° right- quick release vice- Band guide with 8 ball bearings- Hydraulic saw blade clamping with clamping pressure display and strip break-off- Including coolant device- incl. machine cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 250 mmcapacity 90 degrees: flat: 250x250 mmpower capacity: 3,0 kWcutting speed: 15-105 m/mindimensions of saw-band: 3660x34x1,1 mmweight of the machine ca.: 1950 kgdimensions of the machine ca.: 2100x1900x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
