We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
ARBURG ALLROUNDER Arburg Allrounder 720 S 3200-1300 - Plastic Injection Machine screw size:70 mm injection shot weight in Polysterol:984 g/PS closing pressure:3500 kN core drawing:2 control:Selogica daylight:720 x 720 mm opening stroke:700 mm mould height - Max./min.:300 -700 mm daylight between platens - max.:1000-1400 mm weight of the machine ca.:17,7 t - highly wear-resistant plastification unit - Technology step 3 - hydraulic plant with 3 regulating pumps - Technology step 2 - servo-controlled / two-circuit pump technology - Increased power for heating control circuits 1-6 to 3.6 kW each - clamping force increased to 350 Mp - mould blow unit 1 with pressure reducer - mould blow unit 2 w ...
ARBURG ALLROUNDER 221 K5 350-100 (2002) Injection molding machine Closing force: 350kN Opening stroke: 200 mm. Mold mounting height: 150-300 mm. Distance between columns: 350-500 mm. Mold clamping plates: 221 mm. Mold diameter: 342 x 250 mm. Weight of the mit. Mobile of the mold: 75 kg. Ejector force: 24 kN Ejector stroke: 60 mm. Pump motor: 7.5 kW Dry running time: 14.1s Screw diameter: 25 mm. Screw length L/D: 20 mm. Screw stroke: 100mm. Injection volume: 49 cm3 Injected part weight: 41 g/PS Injection pressure: 2000 bar. Injection flow: 54 cm3/s Spindle tangential speed: 29 m/min. Spindle torque: 300 Nozzle support force: 50 kN Nozzle separation stroke: 180 mm. Nozzl ...
Used injection moulding machine made by Arburg model Allrounder 221-75-350, new 1984. Closing force: 350 kN/tonne. Injection force: 77 kN/tonne. Operating voltage: 380V, 50Hz. Heating: 3.4 kW. Pump motor: 7.5 kW. Total load: 10.9 kW. ...
Clamp force: 850kN, heating output: 8.4kW, connected load: 9kW, weight: 930kg. ...
Description: Arburg Allrounder 221 Polytronica Drive Electric motor with hydraulic pump Approx. Onsite Dimension. (l x w x h): 1,200 x 500 x 500 mm, weight approx.: 150 kg ...
Description: U-version can be pivoted horizontally/vertically can be used e.g. for inserts, Protective doors pneumatically operated. Before the machine was dismantled, it was run without heating up or spraying parts and the existing video was made. The flickering on the screen is only because of the frequency of the recording camera. Without funnel disc and documents. A copy of the operating instructions is available from another machine Approx. Onsite Dimension. (l x w x h): 2,700 x 1,400 x 1,700 mm, weight approx.: 1,200 kg
Number of working hours : ONLY 596 25 Ton Machine is like new ...
Clamping force: 200 t Year of construction: 2001 Injection weight in PS: 117 g Control type: Selogica Injection unit: .../350 Screw diameter: 35/35 mm Spec. Spraying pressure: 2500/2500 bar Spraying volume: 127 ccm Injection weight in PS: 117 g Clamping unit: 200/... Clamping force: 200 t Lights spar spacing: 570 mm Aperture travel: 175 mm Max. plate spacing: 950 mm Ejector travel: 225 mm Other equipment: 2 x Core Pulls
Injection moulding machine R2, manufacturer: ARBURG, type: Allrounder Centex 570C 2000-350/150, year of manufacture: 2004, serial number: 195 316, specified automatic hours: 63,755, specified operating hours: 74,749, clamping force hydraulic: 2,000 KN, max. plate spacing: 1,050 mm, mould height: min. 400 mm, ejection force: 66 KN, ejection distance: 225 mm, ejector length: 110 mm, number of hydraulic core pulls: 3, electrical power heating/motor: 13.6/30 kW, spray volume: 182/106 cm³, spec. Spraying pressure: 2,120/1,840 bar, auger: 40/35 mm, radius nozzle: 15, with handling GEKU SR 500 SH, year of manufacture: 2004, serial no.: 1 480, incl. barrier fence, + 1 ARBURG turntable and 1 mixing ...
Stock No.: 503129 Manufacturer: ARBURG Type: Allrounder 370 C 800-350 Control: Selogica Year of construction: 2002 Operating hours: 65000 h Technical data closing page Clamping force: 800 kN Holmass v: 370 mm Holmass h: 370 mm Panel size h: 570 mm Panel size v: 570 mm Installation height min.: 250 mm Plate pitch max.: 750 mm Opening distance: 500 mm Ejector stroke: 175 mm Ejector force: 40 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 35 mm Displacement: 139 cc Spray pressure: 2500 bar Screw length: 23 l/d Screw stroke: 150 mm Screw speed: 57 min Screw torque: 560 N Number of heating zones: 4 Nozz ...