We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
APV Gaulin 5-8 B homogeniser Serial: 97L35085 Stainless, 5.5Kw motor, output of 230 l/h, working pressure 550Bar
used
Manufacturer: APV - Schröder Type: MC18 3TPS Capacity: 4200 l/h Pressure: 200 bar Stages: 2 Condition: very good
used
Used ultrafiltration station made by APV PCI A19 membrane type. New 1996. Previously worked on juice. Capacity 10000 liters/h. Temperature 50 C. Pressure 5,5 Bar. 24 KW motor. 19 membrans dia. 12,5mm
used
Used APV three-stage evaporation station. The station is equipped with an aroma trap. Max. capacity 12000 L / h of evaporation on the juice.
used
Rotary lobe pump Manufacturer : APV Type: BW 2/013/10 Serial number 10002985 or No. 2715204 Head 10 bar Power: 1.5 kW Speed 1,395 rpm, gearbox 284 rpm Inlet DN 80 Outlet DN 80 Temperature max. 110°C
used
Used pasteuriser by APV model N35. New 2004. Capacity 10000 l/h. Heat exchange surface 56.35 m². Operating pressure 10 bar. Operating temperature max/min °C 100/0.
used
Used pasteuriser by APV model N35. New 2005. Capacity 10246 kg/h. Heat exchange surface 54.6 m². Operating pressure 10 bar. Operating temperature max/min °C 100/0.9.
used
1x pasteurizer / KZE system, vinegar pasteurizer, for 5,000 to 7,000 ltr./h, with automatic control, CIP cleaning, see pictures for further details
WE HAVE A NUMBER OF SPARE PARTS AND TOOL BOX FOR MC 18 AND MC 30 GAULING HOMOGENISERS
used
Stainless steel centrifugal pump manufactured by APV.
used
A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...
used
UHT Pilot Plant / Tube Heater Power: approx. 100 ltr./h - Tube heater - 2 process tanks of approx. 70 litres each - High pressure homogenizer APV LAB 100 - PWA cooler
used
Double-walled stainless steel tank with agitator 1500 Liter YOM 1991
used
Centrifugal pump Type: W40/20-220N Manufacturer: APV, Germany Power: 20,000 l/h Speed: 2,900 rpm. Pressure: up to 3.0 bar Connections: Inlet NW 50 / Drain NW 65 Design: Stainless steel Media: Beer, AfG, Milk, Lye etc. Connection values: 380 V, 50 Hz; 3.0 KW Weight: approx. 60 kg Dimensions: 65 x 30 x 35 cm Technical condition: used, excellent operating condition
used
6 departments 1 x steam, 1 x hot water, 2 x product to product, 1 x cold water, 1 x ice water Performance 8,000 litres / hour Clip seals total 423 plates Material of plates AISI 316 (V4A), thickness 0.8 mm
used
very well maintained APV tubular UHT plant. Suitable for the sterilization of highly viscous product with high dry matter, such as sauces and concentrates. Capacity in currently setup variable up to ± 3000l / hr. ( capacity up to 6000 lt/hr for low viscous products is possible with bigger homogeniser) Equipped with 2 ALFA LAVAL SHL20 Homogenizers, one in aseptic execution and with ball valves. Supplied with complete documentation and many spare parts. Yom. 1993, excellent condition.
used
APV Liquiverter TB-250-01. yom.1993, excellent condition. Batchcapacity 250 litres. with double wall for heating or cooling during mixing. The Flex-Mix™ Liquiverter is specially designed for products with low to medium viscosity in order to obtain a fast mixing of powders and particles with liquids. The Flex-Mix™ Liquiverter is usable for mixing, dispersion, recombination and reestablishment of soluble products. It is also used for reconstitution of dairy products, manufacturing of fine foods, emulsions, preparation of starch and hydrocolloid solutions
used
APV K 55 plate apparatus, 6 departments, Y.O.M.1994, late 2005 dismantled, cleaned, new clip seals and plates UV tested. test log exists. Power approx. 960,000 Kcal/h
used
There are two identical Cheese Making Machines APV available, capacity: 8000l, length: 4150mm, width: 2550mm, height: 2600mm, with platform.
used
Used 10500 Litres 2310 Gallon Horizontal Stainless Steel Insulated Tank. Manufacturer: APV Serial: 46337 / 1 Tank Pressure: 30psi work 45psi test Connections Front Dish 1 x APV manway 1 x Sample point 1 x Temperature gauge socket 1 x 6” Pad with blind 1 x 1” RJT male, inlet 1 x 2” RJT male, outlet 1 x 1” Male union, level Top Shell 1 x 3” Flange inlet 2 x 2” RJT male, CIP inlets 1 x 1” Male union, level Tank is fully insulated approx. 120mm complete with GRP and stainless steel sheet cladding. Tank is supported on 4-off 3” tube, mild steel legs complete with adjustable height cast feet.
used
Used 5.5kW APV CLP/2/066/8 Hygienic Rotary Lobe Pump The APV Howard Cleanline is a rotary, positive displacement pump designed for easy maintenance. The cartridge gearbox can be removed in situation, repaired or replaced and back in production with minimum disruption. Manufacturer: APV Model: CLP/2/066/8 Serial Number: 960746/01 Motor: 1440rpm 5.5kw, 415volts, 50hz Inlet: 3“ ISS Outlet: 3“ ISS Impellor: N/A Max. Gearbox Speed: 488 rpm Current Max. Flow: 19,324 l/h Displacement: 66.0 Litres (Litres / 100 rev) Pressure Rating: 8 bar Max. Temperature: 110 C Seal: Mechanical Mounting: B/Plate Hygienic Design: Yes
used
Used APV Evaporation Plant Manufacturer: APV Model: Evaporation Plant The Plant that follows was previously used for Cider Evaporation. It is however possible that this standard plate evaporation system which was manufactured by APV could be converted for other evaporation The information to follow is the description of the Plant including an itemised listing of equipment which is currently located at our works in Rossington, Doncaster. The Evaporator is a specially designed plate heat exchanger. It comprises a number of pressed stainless steel plates separated by rubber gaskets and clamped between a fixed steel had and a movable steel head. The plates are made with connection ports so that on one side of each plate is vacuum steam condensing at approximately 70°C. On the other side is cider under vacuum and boiling at approximately 50°C as it runs in a thin film down the plat ...
used
Used 0.37kW APV CL/0S/006/10 Sanitary Rotary Lobe Pump with Hopper The APV Cleanline is a rotary, positive displacement pump designed for easy maintenance. The cartridge gearbox can be removed in situation, repaired or replaced and back in production with minimum disruption. Manufacturer: APV Model: CL/0S/006/10 Serial Number: 18346 Motor: rpm 0.37kw, 240/415volts, 50hz Inlet: 1“ O Outlet: 1“ DIN Lobe Type: Tri-lobe Gearbox speed: 20 rpm Gearbox ratio: 68.71:1 Max. Pressure: 2 bar Max. Temperature: 110 C Seal: Mechanical Mounting: Stainless steel base plate Hygienic Design: Yes Dimensions: 800mm (H) 320mm (W) 500mm (H) Notes: Fitted with a 290mm diameter, stainless steel hopper.
used
Used APV CLP/2/036/20 Rotary Lobe Pump The APV Howard Cleanline is a rotary, positive displacement pump designed for easy maintenance. The cartridge gearbox can be removed in situation, repaired or replaced and back in production with minimum disruption. Manufacturer: APV Model: CLP/2/036/20 Serial Number: 940037/01 Motor: rpm kw, volts, hz Inlet: 2“ ISS Outlet: 2“ ISS Lobe Type: TBC Gearbox Speed: 433 rpm Max. Temperature: 110 C Current Max. Flow rate: 9,353 l/h Displacement: 36.0 Litres (Litres / 100 rev) Pressure Rating: 20.0 bar Seal: Mechanical Mounting: B/Plate Hygienic Design: Yes
used
Used 596 Litre 131 gallon (gross) Vertical 316 Stainless Steel Mixing Tank / Vessel - Stock Ref: CB6376 Manufacturer: APV Connections Top 1 x Open Top Tank with Thin sheet Cover shroud with open access to work ledge and Grille.(Grille covers half tank and is removable) 1 x Mixer Unit Shroud Top 1 x 6” open vent 1 x 3” SMS male Side 2 x 1½” ISS female Inlets with internal elbow 1 x 1½” ISS male Inlet with internal elbow 1 x 1½” Socket Probe Connection 1 x 2” RJT male on elbow, Outlet Tank is supported on 4-off S/S tube legs with adjustable feet
used
Used 1.5kW APV CL/1/021/10 Rotary Lobe Pump with Hopper The APV Cleanline is a rotary, positive displacement pump designed for easy maintenance. Previous Use: Cosmetics Manufacturer: APV Model: CL/1/021/10 Serial Number: 970526/01 Motor: 2860rpm 1.5kw, 220-420volts, 50hz Inlet: 1.5“ ISS Outlet: 2“ ISS Internal Outlet Size: 1.5” Lobe Type: Tri-lobe Gearbox Make/Model: Brown Pestell / BV27-2142-1.523 Current. Gearbox Speed: 37-260 rpm Max. Pressure: 10 bar Max. Temperature: 110 C Flow Rate at 210 rpm: 3,296 l/h (54.6 l/m) Flow Rate at 960 rpm: 12,096 l/h (201.6 l/m) Flow Rate L/100 Rev: 21.0 L Seal: Mechanical Mounting: Stainless steel trolley (1400mm (L) 500mm (W)) Hygienic Design: Yes Pressure Relief: Yes Hopper Diameter: 630mm Overall Dimensions: Approx. 1800mm (L) 630mm (W) 1200mm (H) Three Available
used
Used APV SR20A Stainless Steel Plate Heat Exchanger - Manufacturer: APV - Model: SR20A - Year of Manufacture: 1990 - Serial No. 694 - Working Pressure: 10Bar - Test Pressure: 15Bar Plates: - Size: 80x30cm - Quantity: 44 Connection Type: - 2½” RJT Overall Dimensions: - 0.9m wide x 0.5m wide x 1.3m long
used
Used 11.5kW APV HC3/20 Hygienic Rotary Lobe Pump Manufacturer: APV Model: HC3/20 Serial Number: 14614 Motor: 294-2940rpm 1.1-11.5kw, 415volts, 50hz Inlet: 2½ “ ISS Outlet: 2½ “ ISS Lobe Type: TBC Max. Temperature: 110 C Mounting: Base Plate Hygienic Design: Yes Pressure Relief: Yes ATEX Rated Motor
used
Used 7.5kW APV HC2/15 (Three Speed) Hygienic Rotary Lobe Pump Manufacturer: APV Model: HC2/15 Serial Number: 14613 Motor: 2766/1567/115rpm 4.1/7.5/1.3kw, 415/415/47volts, 15hz (three speed) Inlet: 2“ ISS Outlet: 2“ ISS Lobe Type: TBC Max. Temperature: 110 C Mounting: Base Plate Hygienic Design: Yes Pressure Relief: Yes
used
Used 10000 litre / 2200 gallon Vertical Stainless Steel Insulated Storage Tank / Vessel - Stock Ref: CB5218 Manufacturer: APV Model: MAV10000 Connections TOP 1 x Ø500 Access 2 x 4” Sight Glasses 1 x 1” ISS Male 2 x 6” Flanges SIDE 1 x 8” cut Tube, Inlet 1 x 8” Flange, Inlet 1 x Sample Point 1 x 6” Mixer Pad (Side Entry) 1 x ¾” socket (Does Not enter tank) 1 x 1” socket (Does Not enter tank) BASE 1 x 4” Pad, Outlet 1 x 8” Flange, Outlet Tank shell is Jacketed & Insulated ( approx 60mm) complete with fully welded stainless Steel Cladding. Support to tank is provided by 4-Off Stainless Steel Tube Legs.